The calculations in this thesis are evaluating the profit as a consequence from treating young stands of pine in Sweden with birch bark extract, BBE. Treatment is to be done with the object to lower or fully reduce the moose browsing on pine. The study is made in three versions. The results from each version separately will follow below. Version I.: The size of the moose population is in no way affected by the reduced resources of food as a consequence of large scale treatment with BBE on pine. Results show profit at a 3 percent level of interest with the exception of treatment program with more than 4 treatments all together and with the exception of Västerbottens Län with an early first treatment. Version II.: The population of moose decrease from 10 to 5 individuals per 1000 ha as a consequence from large scale treatment with BBE on young pine stands.

Background: Liquidity and the management of liquidity are of great importance for companies. Cash management is not a new term, but the need for it has increased recently, for one thing because of the internationalisation and growing harmonisation between the countries in Europe. Netting is a cash management technique, where receivables and liabilities are netted. This technique can be used to release capital and increase the company?s cash flow by reducing the number of transactions in the internal payment system.

The purpose of this study is to examine how employees in an organization using flexible work practices, experience that passive face time influences the evaluated of them. Further, the study aims to understand to what extent that perception of passive face time motivates the employees to spend more time at the office than is necessary for their work situations. The study concludes that employees in general perceive that passive face time does influence how they are evaluated and that this perception motivates employees that are relatively newly employed by the company to spend more time at office..

The agricultural sector accounts for about 13 percent of the total load of greenhouse gas emissions from Sweden (Swedish Environmental Protection Agency, 2007). The Swedish objective to reduce the greenhouse gas emissions with 40 percentage units to the year of 2020, based upon the year of 1990, might imply stricter regulations for Swedish farmers. A regulation or other forms of economic incentives is probably necessary to reduce the emissions originating from the agricultural sector. This study aims to investigate the economic and managerial impact on two agricultural firms with differing production system given that a constraint on green house gas emissions is introduced. Gases included in this study are carbon dioxide, methane and nitrous oxide.

This thesis examines why working time preferences differ between workers and nations, and explains the effect of working time regulation and working time flexibility on negotiating work-life balance. In five separate sections the following working time issues are examined: the number of hours worked by workers in Europe; factors affecting individual working time preferences; how working time preferences are negotiated in the national industrial relations systems of Sweden, France and the United Kingdom; how the institutions of the European Union have influenced working time negotiations through the Working Time Directive; and the benefits and practices available to organisations implementing working time flexibility. Broadly this paper views working time preferences as being a highly personal and influenced by factors such as wages, taxation, culture (national and workplace) and non-work responsibilities. It is argued that negotiating a preferred working time pattern is essential to achieving work-life balance and when such a balance is achieved, workers are more healthy, motivated and committed to their employer. Essentially this provides an incentive for businesses to voluntarily implement working time flexibility beyond the regulatory standards..

The purpose with this thesis was to examine the cold rolling mill located at Högskolan Dalarna and to stabilize the rolling process, to achieve steady state. Experiments with cold rolling of an aluminium strip have given results for rolling force, friction, reduction, strip tension and strain hardening. Results show that steady state has been found for the experiments with roll force and strain hardening, and not been found for the experiments with friction and reduction. Results show that increased strip tension gives lower roll forces. The roll force equation of Stone shows comparable results with reality for dry contact with reductions up to 30 %, but starts being incomparable with higher reductions.

Harm reduction som insats, har för avsikt att minska de negativa konsekvenserna som tenderar att följa missbruket. Konceptet härstammar från 1920-talets England där grunderna för behandlingsformen utvecklades efter att läkarkåren ansåg att underhåll av missbruk i flera fall kan vara nödvändigt. Metadonbehandling och sprututbytesprojekt är två exempel på Harm reduction relaterade insatser. Grunderna för metadonbehandlingen utvecklades i USA av Marie Nyswander och Vincent Dole och lanserades 1966 i Sverige av professor Lars Gunne, aktiv vid Ulleråkers sjukhus i Uppsala. Läkemedelsassisterad behandling är dokumenterat effektiv och visar goda resultat som t.ex.

The report aims to investigate how well a certain type of affordable embedded single board computer can hold up against today's more expensive computers in a computer system by doing various tests on a system with the specified requirements. The system has a Raspberry Pi as the single board computer which task is to control a camera based on coordinates obtained from a server as well as capture and stream a video signal on a network.The researches were conducted to check how much network traffic a single-chip computer sent in different video formats and how much CPU utilization was required. Studies were also made to ensure the accuracy of the camera control. The researches have been experimental, where several tests have been performed and analyzed.The results show that a sufficiently good accuracy can be obtained from the camera steering unit, in which two different servos have been investigated. When the video format MJPEG and H.264 are used, the single-chip computer is able to transmit a video signal up to 1280x720 at 15 fps.

Umeå Energi are working towards a goal, that in the year of 2018, they will be completely climate neutral. As a part of this, one target is to reduce their grid losses by 4 % of the 2012 level, which corresponds to an overall reduction of the grid losses of just over 1.7 GWh. In many residential areas, the distribution grid is designed and rated for electric heating as the heating in the houses. As many of the houses later has been converted to other types of heating, their electricity use has decreased and the total power output from many of the secondary substations has decreased significantly. Because of this, many of these stations today are well oversized, which in turn means that the energy losses in these stations are unnecessarily high.In this degree project, 25 secondary substations have been studied, all located in residential areas in and around central Umeå.

The Swedish boreal forests are limited by nitrogen (N) availability. While biological N2 fixation by cyanobacteria hosted by pleurocarpous feather mosses are important sources of N input to natural boreal forest ecosystems, little is known about the patterns of N2 fixation in silvicultural systems. This study investigates the biological N2 fixation rates of two boreal feather moss species (Pleurozium schreberi and Hylocomium splendens) along a chronosequence from clear-cut to mature forest, as well as the vegetation characteristics along the chronosequence. Measurements and samples were collected from 32 forest sites that were classified into four age classes (clear-cut, pre-commercially thinned, thinned and mature forest). The sites were located near the city of Arvidsjaur in northern Sweden.

Problem: How is Lean, a production-focused model being applied to non-productive focused industries.Purpose: To examine how Lean has been applied to the department of Turbuhaler-Kvalitetskontroll and which parts have been successfully applied.Problem statement: How does the implementation of Lean?s basic concept, which originated in the car industry, differentiate itself from the implementation of Lean in the pharmaceutical industry, in this case the department of Turbuhaler-Kvalitetskontroll at AstraZeneca.Conclusions: The department has had success in its implementation of lean. They have developed and modified the basic concept in order to apply it and excluded the parts they did not consider necessary. Through their work they have accomplished numerous improvements in, among other things, the reduction of lead time. .

Today the competition in the automobile industry is getting all tougher. The technology behind cars becomes more advanced. To get ahead of competitors car companies has to look into new areas of innovation.One important area is vehicle safety. Bigger companies have come so far in vehicle safety that difference between cars more depends on the car type (size) than the technology behind it.There is one area where vehicle safety that still has great opportunities for improvement, which is in active safety. The term active safety states that the car has the ability to identify treats and automatically respond to the treats.

A helicopter based system equipped with a millimetre-wave fire control radar is studied for improvement of the detection probability for moving ground targets. The system is a pulse doppler radar that sends out the electromagnetic wave in repetitive pulses. The frequency in which radar sends this pulse is called Pulse Repetition Frequency (PRF). The velocity of the moving targets is measured by spectral analysis of the pulses received. With this sort of system some targets will not be possible to detect.

This report relate a concept study that consider a number of different proposals to improve the overcharging system in BAE Systems Ha?gglunds tracked vehicle series BvS10, to maintain sealevel power at extreme altitude.At high altitude the power losses beacuase of the air density that decreases, which results in less fuel can be burned. The decreasing of air density also gives rise to fatigue failure of the turbocharger unless power is reduced.The proposals shall be as required by BAE Systems Ha?gglunds economically sustainable and defensible from a packing perspective. That means the selected solution must have a reasonable price tag and at the same time a minimal impact on adjacent components.The basis for this thesis is based on benchmarking of both the auto industry as the flight industry, to find inspiration and tips for improvement.Some of the concepts have after gathering facts and calculations been excluded while other solutions has been considered as workable and thus interesting for BAE Systems Ha?gglunds.Initially the current turbochargingsystem was analyzed in order to determine the starting point and thus be able to fix the current problems surrounding high altitude driving.

This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.