Syftet med studien var att få en djupare inblick i hur ensemblepedagoger ser på Time samt hur de didaktiskt arbetade med detta. Vi avsåg att få djupare inblick i olika förhållningssätt som ensemblepedagoger kan ha till Time i en undervisningssituation, samt vad begreppet Time innebär. Studien har sin teoretiska utgångspunkt i ett sociokulturellt perspektiv med fokus på hur människor använder olika redskap för att kommunicera med sin omgivning.Vi anser att vi har fått en bredare ingång i ämnet genom att alla pedagoger spelar olika instrument. Den gemensamma faktorn är att de undervisar i ensemble på folkhögskola. I undersökningen använder vi oss av den kvalitativa forskningsintervjun för att söka svar på våra frågor.

This report is the result of a case study at Peltor AB during the spring semester of 2007. The task Peltor gave us was to improve the delivery accuracy and to lower the high finical value of delayed orders (backorder), and to divide the products into logical groups. The logical group will be a useful tool to remain a high level of service. If the level of service increases the company will be more competitive.The electronic department at Peltor has problems with delayed orders. According to Peltor, the problem is based on delivery lead time which is presumed.To increase the delivery accuracy, a lead time analysis is made to find the accumulated delivery lead times for each product.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

!is began as a product design challenge, which stipulated broadlythat the designer be ?inspired by a subject?, whose ideas would leaddown a path of product idea evolution. From there, the goals forthe end-product would undergo rigorous revisions, re-de#nitionand re#nement. !e end-product itself would be the result of anentire thinking process.!e subject I have chosen is: Time. I want to challenge and evenalter our conventional sense of time, using principles ofdesign.

The structure and performance of grocery distribution in Sweden has changed profoundly since the second world war. Increasing access and usage of the private car, in combination with an accommodating town planning has enhanced the exploitation of scale economies within distribution firms. There is, however, some ambiguity concerning the overall efficiency of the distribution system when the costs associated with travelling and purchasing performed by households are treated as an integrated part of the total distribution cost function. The purpose of this master thesis is to develop the foundation of a spatial optimisation model, which defines the most efficient distribution system. The underlying idea is that the optimal localisation and size of grocery stores is a function of economies of scale within the firms weighed against distributions costs within the households, such as transportation costs.

This master thesis project at KTH is performed in the Mechanical and Aerospace Engineeringdepartment at University of Florida (UF). The thesis is a small part of a gas turbine researchproject where a vapour absorption refrigeration system (VARS) and a high pressure regenerativeturbine engine (HPRTE) are integrated together. The main objective is to build a computermodel of the VARS. The computer model is supposed to be used to analyse the off-designperformance of the VARS and should also be easy to integrate as a subroutine in a more complexsystem model. To model the VARS some knowledge of the absorbent/refrigerant mixture had tobe well known, in this case a mixture of ammonia and water.

The purpose of this study is to examine how pre-school teachers think about the importance of circle time in regard to the child's language and social development from a sociocultural perspective. Furthermore the study will include what role the educators? have during the circle time.To answer our purpose we have chosen the following question:What is the role of the teachers in the circle time?What are the teacher?s thoughts about the circle time?s importance to children's social development?What are the teacher?s thoughts about the circle time?s importance to children's language development?The study is constructed on qualitative methods, where we conducted structured interviews with six preschool teachers and observed their circle time to collect our empirical material. The study is also based on Vygotsky's sociocultural perspective which says that all learning takes place through relations and interaction with other people in the cultural context you are in. The results have shown that pre-school teachers are aware of the circle time?s importance to children?s development, and purposely plan the circle time to give children the opportunity to develop both socially and linguistically skills..

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

Music production software has a strong tradition of two-dimensional graphical user interface (GUI), in which the time line is represented as a flat composition either horizontally (from left to right) or vertically (from top to bottom). In my degree work titled Sequi, I approach music composition from a different angle. Instead of a two-dimensional time line with only two possibly ways of progression (forward or backward) I constructed a three-dimensional GUI with the maximum of four different ways of progression from any given point in a composition. The height axis is used to describe time-intervals (the time between downbeats) and the wide and depth axes are used to describe progression from one sound to another..

In 2014, the Swedish leisure-time centres after school became widely criticized on several occasions by school authorities. The cause for its criticism was a reflection of leisure time-centres with lots of untrained staff and a lack of pedagogical aspirations. The conclusion of the criticism was that these leisure-time centres do not fulfil their potential. However, these assessments has only to a limited extent become a part of the public educational discourse in Sweden. This discourse has mainly focused on the decreasing results in the Swedish school, which has caught the attention in the media and ended up on the political agenda.

The Smart Grid technology has during the last decade been established as a way to create a greater flexibility on the electricity grid that will be needed as the development moves towards an increased share of renewable primary energy sources in the electricity production. One part of the Smart Grid technology is the ability to shift loads in time, to adapt to either price or emissions, known as Demand Response. This project, which was conducted at KTH in collaboration with the consulting corporation Capgemini, examines the economic, environmental and social aspects of the Demand Response technology. In the project, three household products are used in a model that derives the potential savings in costs and emissions of CO2e. The results show that the actual savings measured in SEK are small, but that the savings measured in percent can be as high as 20 percent. Reduction of CO2e emissions is slightly lower.

AbstractElectricity consumption is a globally increasing problem caused by the high share of electricity produced in coal power plants. These contribute to high carbon emissions when only about 1/3 of the heat generate electricity and the remaining 2/3 of the heat cools off. Combined heat and power plants (CHP) have high efficiency because they use the residual heat for domestic heating. The CHP plant often use fuels from renewable resources, giving them a lower carbon footprint, but are also depending on the heat demand. If electric powered products such as drying cabinets convert to heat powered products more environmentally friendly electricity will be produced by CHP plants, which can supplant electricity, produced from coal power plants and reduce carbon emissions.

This bachelor thesis includes two different manuals and design of an interface box between a test object and a general test station (computer) with ARINC429 communication.There are three different purposes with this project:The first is to setup a general test station with ARINC429 communication using a communications card from DDC (DD-42916i3-300) and software from Ampol Technologies (dataSIMS).The second is to design a new interface between the test computer and the test object. As well as implementing two components in the equipment.The third is to write two separate manuals to guide the users of this equipment. There are two different kinds of users of this equipment, technicians and system engineers. Technicians use the equipment to test and repair flight components. System engineers will implement new components in the equipment.The result of this project is a working test station with a new interface and two manuals..

In order to optimize calf welfare and health it is important to know the behavior of cattle in free ranging conditions. When the cow is about to give birth to a calf she will leave the heard about 12 hours before. It is then rather obvious that isolating the cow about calving time in a single pen is imitating the cows? natural behavior. To save space and minimize building cost it?s common that the farmers build calving pens for four of five cows especially at larger farms.

Sudoku solvers are a widely researched topic among mathematicians and computer scientists. This report investigates the differences in execution time and time complexity between backtracking and human strategies for classes with 17-21 clues. Backtracking is compared to our implementation of human strategies with test data that contains 99 Sudoku puzzles for each class. The study shows that the execution time and time complexity is improved for human strategies compared to backtracking for each class. The conclusion shows that it is always favorable to implement the human strategies investigated in the report. .