WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

Växthus används för att ge ett bättre odlingsklimat åt grödor och växter. För ytterligare förbättring av förhållandena används växthusvävar som exempelvis kan reglera temperatur, fuktighet och ljustillförsel. Väven som behandlas i denna rapport är en så kallad energiväv som främst har till uppgift att minska energiåtgången vid uppvärmning.När väven är fördragen nattetid, ökar luftfuktigheten då grödorna avger fukt dygnet runt. Fukten kan kondenseras mot energiväven, vilket gör att det bildas droppar på väven som kan falla ned på växtligheten. Den höga luftfuktigheten kan medföra svampsjukdomar och i övrigt också bidra till att tillväxten avstannar.

Lip force has been found to affect the ability to achieve satisfying speech production and swallowing. A normative value for lip force in adults has been measured to 15 Newton (N). Corresponding value for children measured with Lip Force Meter 100 (LF100) does not exist. In the current study lip force was measured in children between the ages of five and ten years. The aim of the study was to obtain normative values for children with typical development in separate age groups.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context. We compare Matte Painting with a theatrical backdrop, a background that closely or viewed from the wrong angle can break the illusion that it is a real world environment. We will investigate and present how to build a digitally created Matte Painting that enables not having to travel across the country for the ideal film location, but can shoot the scene in a studio environment. We analyze existing film scenes that have made use of Matte Painting, making comparisons between different uses for Matte painting and discuss a conclusion that answers our main question: "How has the evolution of the film technology, Matte Painting, looked like and how you can apply a digital matte paint in post production to enhance the overall experience of a movie scene?".

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

The eyewitnessed reportage has a pronounced character of narrating. The imaginative power of the text helps the reader to empathise with the characters. That makes constructing empathy a necessary skill of reporters. But how can this be done?Despite a tradition of story telling among reporters, narratologists virtually have neglected the reportage genre.

The eyewitnessed reportage has a pronounced character of narrating. The imaginative power of the text helps the reader to empathise with the characters. That makes constructing empathy a necessary skill of reporters. But how can this be done?Despite a tradition of story telling among reporters, narratologists virtually have neglected the reportage genre.

Idag använder allt fler människor sina smartphones för att surfa och använda tjänster online. Detta innebär att en stor del text läses på små skärmar. Detta arbete handlar om hur text bäst utformas och struktureras för att enklast kunna läsas och uppfattas på en mobilskärm. Faktorer som berörs är typgrad, ljusrum, textlängd, teckensnittsklass, radlängd, bild i text och kontrastverkan. Arbetet utgår från en normativ, svensk person utan funktionsnedsättningar.

Both authors of this study have been involved in the School of Business at Umeå University Student Association (HHUS) and is due this discovery deficiencies and problems within the association. The pressure to engage in HHUS is compared with other financial organizations around the country very low. This led us to consider why this is the case. From experience we know that communication between the association and its members are not functioning optimally. Communication itself is essential for motivating students and for that motivation should be high for the students to experience good quality on the engagement. The purpose of this study is to identify lines of communication and motivational factors that affect students who are members of HHUS to get involved or not.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.

During the spring semester 2012 Robin Westlund has accomplished ?Controlled interaction for more creative meetings - Summit Flexiwall? with the individual focus on social communication based on visual interaction in future office. The project was a part of the course Degree Project for degree of Bachelor of Science in Innovation and Design Engineering (MSGC12) which includes 22,5 ECTS Credits. The course is a part in the program Innovation and Design Engineering program within the Faculty of Technology and Science at Karlstad University.Assigner of the project was Moelven Eurowand AB with their head office in Örebro. The company manufactures and assembles entire room solutions for offices.

Syftet i vår kandidatuppsats var att belysa gymnasieungdomars egna berättelser av sin presentation på Facebook och Instagram, och hur användandet påverkar deras identitetsskapande samt deras tankar kring användandet av dessa sociala medier. Vår studie är gjord utifrån en kvalitativ ansats där vi intervjuat nio ungdomar i tre fokusgrupper. De använda teorierna i studien består av det dramaturgiska perspektivet av Erving Goffman och modernitet och självidentitet av Anthony Giddens. Tillsammans med dessa används också aktuell forskning inom området.Resultatet visar att Facebook och Instagram är en stor del av gymnasieungdomarnas vardagliga liv och att de deltar för att de inte vill vara utanför. Forumen står för kommunikation med kontaktnätet, underhållning och vardaglig uppdatering om event och publicering av bilder på speciella händelser.

GE Healthcare wants to investigate whether additive manufacturing would be an alternative method in their workshops in the Umea? plant. Additive manufacturing is called 3D printing in everyday language and manufactures details by building them up layer by layer in an automated machine. The purpose of this work is therefore to investigate how mature additive manufacturing methods are and how they could be used at GE.The work has been divided into three parts. The first section investigates how additive manufacturing would work in the production workshop at GE.