The main goal of this project was to develop some sort of a diverter for pipestransporting waste in a vacuum system. This unit was supposed to be both cheap andeasy to serve/exchange worn out parts. With a limited space to install the pipeexchanger, the challenge was to keep it as compact as possible without constructingbends with to small radius or to sharp angles as this would wear out the system a lotfaster than planned. The system was also supposed to be able to handle clothes andscrubs from hospitals. Having too much sharp edges or angles would tear the clothesapart.

Abstrakt Detta kandidatarbete handlar om visuella effekter inom film och dess utveckling genom åren. Visuella effekter har öppnat en ny värld för filmskapandet då man kan skapa i princip vad som helst vilket gör att det omöjliga helt plötsligt blir möjligt, på filmduken. Kandidatarbetets syfte är att titta på utvecklingen av visuella effekter och hur man kan använda de kunskaper i en mindre filmproduktion. Vår problemformulerings frågeställning är ?Hur har utvecklingen inom visuella effekter sett ut och hur kan man implementera dessa kunskaper i en mindre filmproduktion??.

 This report will describe a project between two students from Karlstad University and Markus Norström from Hovercraft solutions. The project aim was to develop a cabin for the hovercraft 380TD. The project was divided into two sub parts; one concerning the design of the cabin and one concerning the engineering. Throughout this rapport you can follow the engineering part of the project. The project has followed a systematic product development process resulting in optimized results for material selection and engineering solutions.

This degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

This master thesis has been performed at Sectra Communications AB in Linköping where they manufacture electronic encryption devices. In cryptology it is essential that an eavesdropper cannot find the plain text. To assure that a system is safe, all devices are thoroughly examined so that they don?t emit any secret information, so called Compromising Emanations (CE). This is done by comparing the secret signal with measured signals on the screen of an oscilloscope, a process that is very time consuming and furthermore, the risk of missing compromising emanations is high.

In this thesis I focus on the artistry and essential work, behind the scenes that storyboard artists have contributed to, since the early days of film history. The works I will focus on are the important phases of pre-planning of feature films and animated films. I theorize on the aspect of what makes a good story and how it is brought to life on the screen, as well as how the story is actually conveyed with this drawings. The hypothesis maintains the importance of storyboards, as well as defining their main purpose. Using a formalistic point of view and historical argumentation, I examine and compare five different directors´ use of storyboards and how their respective collaborative teams (i.e director of photography, production designer and story artists, editors etc) create each film´s particular nuances and cinematic expressions.

 Inledning: Under 2000-talet har olika slag av bolagsskandaler uppmärksammats inom företags- och finansvärlden, som har kommit att påverka ekonomin och redovisningen en hel del. Bland dessa finns bland annat energibolaget Enron, telecombolaget Worldcom samt svenska bolaget Skandia. Effekterna av bolagsskandalerna är många och i värsta fall kan företagsledarna få handskas med fängelsestraff. Syfte: Syftet med studien är att granska begångna regelbrott i stora bolag samt jämföra de med varandra för att se vilka likheter och samband som finns kring bolagsskandalerna som uppstått.Teori: I den teoretiska referensramen beskrivs teorier om bolagsstyrning, Svensk kod för bolagsstyrning, den svenska modellen för bolagsstyrning, agentteorin samt Sarbanes Oxley Act. Metod: Insamlingen av kvalitativ data har skett via sekundär datainsamling, exempelvis via artiklar, tidigare studier, Internet samt böcker. Slutsats: Det finns tydliga mönster mellan de begångna bolagsskandalerna som har undersökts i denna studie. Ett av de dessa är att ledningen i de flesta fall håller i trådarna. Motivet till de flesta brotten ligger i grund och botten på att rädda bolaget från att gå med förlust eller till och med i konkurs, eller att leva upp till ställda förväntningar på exempelvis Wall Street. .

WSP building physics in Stockholm has certified the preschool Temmelburken in Bromma with the system of certification Miljöbyggnad. The rating of the building became BRONZE. In this thesis the preschool has been investigated with respect to the three areas: thermal climate, use of energy and improving of the level of certification. The thermal climate at the preschool has been investigated by a questionnaire survey and by measurements in order to do comparisons between the results from the two investigations as well as with the results of the simulations that WSP has done at the certification of the preschool. The differences between the results from the simulations and the questionnaire survey for winter as well as from the measurement performed with a comfort meter the 19th of March are concidered to be reasonably small since they give rise to the same rating according to Miljöbyggnad.   Operational data for the use of energy for the preschool have been obtained in order to do comparisons with simulations performed by WSP and Svenska Besiktningar AB. The comparison shows that the simulated values for the specific use of energy are lower than what the real specific use of energy would be for the preschool, since just the operational data for the heat energy is higher than the simulated values. At the investigation of the possibility of improving the level of certification it was found that the rating of the preschool can be raised from BRONZE to SILVER by improving the ratings of the ?thermal climate summer? and the ?daylight?.

In 1998, 'the Naval Port of Karlskrona' was inscribed as a World Heritage Site by UNESCO and thus, it is equally protected as China?s Great Wall and the Pyramids of Egypt.The essay is a case study of Karlskrona, one of Sweden's most well planned cities, where famous urban planners and architects such as Erik Dahlberg and Nicodemus Tessin the Elder has been involved.Today, Karlskrona is a rather unknown small town in Sweden's outskirts, where population growth has been a problem. When Karlskrona was founded, in the late 17th century, Sweden was a major power. The Blekinge archipelago was in the middle of the Baltic dominion and Karlskrona represented a midpoint in the kingdom. Therefore, Karlskrona has a small town charm with the history and style of a cosmopolitan city.By initially studying how the town?s character of today is expressed, the history of Karlskrona is explored.

This exam paper has been a collaboration between the writers and SYSteam Utvecklingspartner in Huskvarna. The assignment was about finding a need for a mobile application, making a requirement specification document with design documents and parallel to this constructing a prototype. The assignment is summarized in the following questions:? How can companies in the forest industry benefit from mobile information technology?? How can a user centered perspective be used in the process of making the requirement specification document and the design documents?? How do guidelines for usability apply to a mobile application?Three visits to companies in the forest industry were made to find a need for mobile information technology solutions. After a small analysis of the different companies? problems and conditions the decision was to use Tenhults Impregneringsverk AB in the case study.We used the FA/SIM method in our job of finding the organization needs for change and the principles of User Centered Design in the work of constructing a prototype.The result of our work is a requirement specification with design documents and a prototype.

When constructing a building, a number of aspects must be harmonized in order for it to fulfill requirements ? a building must fulfill requirements such a load-bearing, conservation of energy and a good indoor environment by means of, among other things, moisture proofing .Moisture problems in buildings can affect health negatively. As we are increasingly staying in indoors, demands on a good indoor environment are higher.This work starts with examining moisture problems in slab-on-ground solutions, and then links the various scenarios to moisture problems in a concrete slab of a real building. The building with moisture problems is located in Årby by in Borlänge and moisture damage was found in the slab at an apartment adjoining wall.By reviewing literature written within the field of moisture problem, making hand calculations and modeling in the program Comsol Multiphysics, judgments are made to find explanations as to why the rise of moisture occurred in the building in Årby by.Generally, the following guidelines may be used to reduce the risk of moisture problems in slab-on-ground constructions:Drying of construction moisture before laying the floor material.Using draining layer beneath the slab, to prevent capillary suction.Using insulation under the slab, partly for comfort and to establish the temperature difference between the ground and the concrete slab.Avoid direct contact between the wood and concrete, due to degradation and fouling smells that normally occurs.If necessary, use additional vapor barrier.In addition to the above, there are various methods for moisture-proof and moisture-monitoring by design or by the method ByggaF suited for the entire construction process various events..

By using industrialized building, pre-installed modules can be delivered to the construction site where they are easily mounted. This method has many advantages compared to on-site manufacturing, for example, the precision during the production process should be much higher than building each wall and floor on site. Furthermore, the quick erection procedure when using prefabricated elements and the possibility to use weather protection has the advantage of not being dependent on weather conditions, and many other factors.Masonite Beams AB is a Swedish company (a member of the Norwegian company, Byggma ASA) with a relatively new technology using light weight beams as bearing elements in the walls and a certain stiff board lamella slap which is mounted on the top of the floor structure creating an integrated stiff beam / board floor structure. The elements are flat which make it much easier to transport the elements from the factory to the building site where the building parts are easily mounted with special mounting stud.One of the main drawbacks of lightweight structure is the sound transmission. The main topic is low frequency annoyance, however the complex structural elements and their mutual sensitive connections other acoustical problems might appear.

Växthus används för att ge ett bättre odlingsklimat åt grödor och växter. För ytterligare förbättring av förhållandena används växthusvävar som exempelvis kan reglera temperatur, fuktighet och ljustillförsel. Väven som behandlas i denna rapport är en så kallad energiväv som främst har till uppgift att minska energiåtgången vid uppvärmning.När väven är fördragen nattetid, ökar luftfuktigheten då grödorna avger fukt dygnet runt. Fukten kan kondenseras mot energiväven, vilket gör att det bildas droppar på väven som kan falla ned på växtligheten. Den höga luftfuktigheten kan medföra svampsjukdomar och i övrigt också bidra till att tillväxten avstannar.

Lip force has been found to affect the ability to achieve satisfying speech production and swallowing. A normative value for lip force in adults has been measured to 15 Newton (N). Corresponding value for children measured with Lip Force Meter 100 (LF100) does not exist. In the current study lip force was measured in children between the ages of five and ten years. The aim of the study was to obtain normative values for children with typical development in separate age groups.