Accessibility is today a topic of high current interest. It is a requirement for equality and a democracy question. By the year 2010, easy measured hindrances in all of Sweden's municipalities should be cleared away; this is stated in Swedish law. The physical accessibility to our public places is particularly important for functionally disabled people since it affects their possibilities to be outdoors and also their participation in society. When designing these places, it is difficult to find solutions that fit everybody, especially since good accessibility not only should fulfill all physical requirements of accessibility but also values of experience.

Syftet med detta examensarbete är att undersöka och jämföra två olika beräkningsmetoder när det kommer till beräkningar av väggskivor. Den ena beräkningsmetoden baserar sig på traditionella handberäkningar där anvisningarna i BBK 04 (Boverket 2004) och Betonghandbok Konstruktion (Lorentsen, Mogens, Cederwall, Krister & Östlund, Lars (red.) (1990)) följs. Den andra metoden baserar sig på finita elementmetoden, och utförs med hjälp av programmet Strusoft FEM-Design Wall. Med Finita elementmetoden delas konstruktionen upp i flera små delar, så kallade finita element, som sedan beräknas var för sig, och sedan sätts alla delarna ihop till ett resultat för hela konstruktionen. Två olika väggskivor beräknades, en solid väggskiva samt en väggskiva med ett dörrhål i. Vid jämförelsen på den solida väggskivan visade sig resultaten stämma väl överens med varandra.

This degree project illustrates newsprint and waterless offset. A new news press was introduced at Drupa-00, Cortina from KBA, which is the first news press dedicated the waterless technique. With actual statistics from the company in question an investigation was made whether their production fits this press. It came out in the investigation that the production of the company, from statistics, fits this press very good. A table was made where different timeschedules were accounted for the new press, with semi- and full automatic plate changing for present and to be added papers.

Title: I saw it on Facebook ? Youth presentation of self on FacebookAuthors: Nicole Dreher & Anders SkoglundPresented: 01.06.2010Purpose: The purpose of this thesis was to examine how the, in the study, participating youths make their presentation of self on their Facebook profiles.Methodology: The method used in the thesis was a social semiotic analysis focusing on the social semiotic concepts: semiotic resource, semiotic potential, affordance, denotation and connotation. A social semiotic analysis of composition was also used with the purpose to gain a deeper knowledge of the social semiotic affordances of Facebook?s composition.Theoretical perspectives: The theoretical base of this thesis consists mainly of Erving Goffman?s theory on presentation of self in everyday life as well as relevant theories to youth culture in sociology and identity in social psychology.Conclusions: The results show that the youth?s presentations of selves mostly takes place in their profile picture, status updates, groups, fan pages and through their communication with other users on their wall. The borders between front and back stage on Facebook entirely depends on the norms that the reader expects the profile owner to uphold.

After the fall of the Berlin Wall in 1989 the satellite states of the former Communist bloc immediately departed on a journey towards democracy and market capitalism. Among the many tasks of the newly elected governments, one was to transform the paternalist Communist welfare state into a social system that would decrease the oversized role of the state, at the same time as protecting the citizens from the hardships ensued from the transition.I have studied the evolution of new welfare systems in the Czech Republic, Poland and Hungary, three countries generally agreed as the most similar and most successfull transition countries of the Eastern bloc. Gøsta Esping-Andersen's prominent typology of welfare regimes, consisting of the liberal, corporatist and social democratic regime-types, has constituted the theoretical basis of the analysis. Simultaneously, applying new cases to the typology implies an element of theory testing.The study shows that 40 years of Communism and partial isolation from the West has not prevented these three countries from developing welfare states fully compatible with those of Western Europe and the Anglo-Saxon nations and that all three of them in fact fall within the scope of the corporatist regime-type..

Emma Eriksson and Christina Henriksson: Mirror mirror on the wall: A study on how ballad texts reflect women as carriers of tradition in nineteenth century Sweden, Växjö: Musikvetenskap C, 10 p 2005.The aim of this essay is to analyze relations between ballad texts and the lives of female carriers of tradition in nineteenth century Sweden. Four carriers of tradition have been chosen, connected by being informants to Gunnar Olof Hyltén Cavallius, a collector of medieval ballads in Sweden around 1850. The four women are Anna Ehrenström (1786-1857), Catarina Andersdotter (1792-1857), Johanna Gustafva Angel (1791-1869) och Wendela Hebbe (1808-1899). Their lives are seen from a women?s historical perspective.Although there are uncertainties regarding to what extent the collected repertoire of the four women reflects their repertoire as a whole, some conclusions can be drawn regarding relations between remaining ballads and their lives as women.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context.

This thesis is a study of humidity at Knauf Danogips external plasterboard. The study is performed at the building project Kv. Maskinen in Jönköping in cooperation with NCC Construction AB and Knauf Danogips. The measuring was performed during five winter/spring months to see how the weather influenced the plasterboard.The measuring was performed at a small two-storied building and a larger fourstoried building. From the buildings` placement were a couple of measuring dots selected and to get a good result was the dots located in the four cardinal points.

The aim of this study was to evaluate the stir drying method, for drying of grain during Swedish conditions. The evaluation was done during the harvest year 2004, on four farms with stir driers. The driers were evaluated for their energy consumption, design, stirring effectiveness and how much time the farmer has to spend on every tonne of grain. A comparison was also done with conventional Swedish high temperature driers. Totaly six batches of grain from stir driers were examined, mostly winter wheat, but also barley and wheat.

Det här kandidatarbetet kommer framförallt att beröra filmtekniken, Matte Painting, men vi kommer även röra oss runt omkring ämnet och presentera andra delar från filmproduktionen och framförallt postproduktionen för att lättare kunna sätta Matte Painting i ett relevant sammanhang. Vi jämför Matte Painting med en teaterkuliss, en bakgrund som på nära håll eller ses från fel vinkel kan bryta illusionen av att det är en verklig miljö. Vi undersöker och presenterar hur man kan bygga upp en digitalt skapad Matte Painting som möjliggör att inte behöva åka land och rike runt efter den idealiska filmplatsen, utan kan spela in filmscenen i en studiomiljö. Vi analyserar existerande filmscener som har använt sig av Matte Painting, gör jämförelser mellan olika användningsområden för Matte Painting samt diskuterar fram en slutsats som besvarar vår frågeställning: ?Hur har utvecklingen av filmtekniken, Matte Painting, sett ut och hur kan man tillämpa en digital Matte Paint i postproduktion för att förstärka helhetsupplevelsen av en filmscen?? --- This thesis will primarily concern the film technique, Matte Painting, but we will also roam around the subject and introduce other elements of the film production, and above all post production for ease of putting Matte Painting in a relevant context. We compare Matte Painting with a theatrical backdrop, a background that closely or viewed from the wrong angle can break the illusion that it is a real world environment. We will investigate and present how to build a digitally created Matte Painting that enables not having to travel across the country for the ideal film location, but can shoot the scene in a studio environment. We analyze existing film scenes that have made use of Matte Painting, making comparisons between different uses for Matte painting and discuss a conclusion that answers our main question: "How has the evolution of the film technology, Matte Painting, looked like and how you can apply a digital matte paint in post production to enhance the overall experience of a movie scene?".

This report is the result of a degree project in building engineering, at an advanced level. The project evaluated a building from a technical and historical point of view, and focused on its energy consumption, particularly the energy used for heating. The building in question was a small apartment building in Strömsholm, Sweden. It was made in 1902, from vertical logs, a not so common form of the traditional log house. The goal of the project was to evaluate if the energy consumption could be reduced in accordance with building preservation regulations, that is without damaging any of the building?s cultural or historical values.The building was surveyed with the help of archive and literature studies, interviews and inspections.

The eyewitnessed reportage has a pronounced character of narrating. The imaginative power of the text helps the reader to empathise with the characters. That makes constructing empathy a necessary skill of reporters. But how can this be done?Despite a tradition of story telling among reporters, narratologists virtually have neglected the reportage genre.

The eyewitnessed reportage has a pronounced character of narrating. The imaginative power of the text helps the reader to empathise with the characters. That makes constructing empathy a necessary skill of reporters. But how can this be done?Despite a tradition of story telling among reporters, narratologists virtually have neglected the reportage genre.

This thesis is ordered by Peab Sweden AB Regional Jönköping and concerns of warranty inspections.The intention is to work out a basis, which show the most common complaints is the warranty inspections, and make a small analysis on what causes them to be. The report also presents possible solutions to prevent the occurrence of defects. It also covers the issue of how the client looks at Peabs way to overcome the objections of warranty inspections. The report has the following issues:?What are the most common errors observed during the warranty inspection??What are the causes of complaints??What can be done to reduce the number of complaints??How the customer thinks that the complaints be addressed?Twenty-five Guarantee survey records from the projects Peab has done in recent years has been the starting point for the investigation.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.