The basic ingredient of paper is the individual wood fibers. The property of the fibers depends on a variety of factors e.g., method of pulp production and processing. The final sheet quality depends in part on how the fibers interface between each other and therefore factors that affect the fiber size are of interest.The flexibility of the fibers depends in part on the pore water i.e., the fiber swelling. The sheet becomes less flexible at low water content which gives a loss in strength. Thus it becomes desirable to increase the water uptake.The experimental investigation described in this report consists of exposing the wood fibers to different ions and ionic strength and then measure the pore size by thermoporosimetry where a DSC (Differential Scanning Calorimeter) is used.

Today every organization is committed to some kind of environmental Scanning in order to get necessary knowledge of the world around them. The acquisition, organization and storage of information in combination with a strategic use, is today an important factor for a successful organisation in any sector of our society.In this Master thesis I have studied how an organisation such as The Confederation of Swedish Enterprise (Svenskt Näringsliv) handles its information resources. I have also looked at the flow of information within the organization. The Confederation of Swedish Enterprise is Sweden?s largest business federation representing 50 member organizations and 55 000 member companies.

The purpose of this paper was to identify the elements and the alloys that five objects found in Birka consist of and to examine whether there are any significant differences between the presumably imported and domestic objects. The material was analyzed using a Scanning electron microscope (SEM) which was equipped with an energy dispersive X-ray spectrometer (EDS) in order to identify the elements that are present and the alloys that the objects are made of. Then the SEM results were compared with the results of previous analyzes that have been performed on finds from Birka in order to investigate how the objects differ in elemental composition and to find out if there are any significant differences between them. The results showed that the objects? content of the elements analyzed varies as the copper alloys the objects are made of.

This project report shows the work around a mockup to a three-dimensional avatar-making application. An avatar-making application is a computer-based software program in which it is possible to create your own personal virtual character. The possibility to use three-dimensional avatars can in the future be essential for adding extra personal information or characteristics to social communication over the internet or over mobile phones. The problem of transforming a physical form and reconstruct it to a virtual basis has been an important problem to solve for many companies and software developers in the, for instance, virtual worlds area. Methods and ideas over making this transformation is the key throughout this project.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and Scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Future emission legislation puts great emphasis on increasing the efficiency of the engine, thereby reducing fuel consumption. The tribological contact between cylinder liner and piston ring is where an great amount of energy is lost due to friction, and by reducing these losses an reduction in fuel consumption can be achieved.The aim of this thesis was to evaluate the tested piston ring coatings against a plasma sprayed cylinder liner and rank these combinations of materials for friction and wear resistance. The coatings that were tested was Cr + Al2O3, (Al,Cr)N, two types of CrN and WC / C.The experimental tests were performed with a so-called pin-plate, where used oil with addition of an acidic mixture of sulfuric and nitric acid to mimic the acidic condensate formed when exhausts recirculate, were added with a continuous flow. The results were then analyzed by weighing, studies by optical microscopy and Scanning electron microscopy (SEM) and profile measurements.The results from each material combination were that the plasma coated cylinder liner wears too aggressively in order to yield a ranking of the piston ring coatings based on the parameters of friction and wear resistance. It is therefore proposed that an alternative coating on the cylinder liner should be developed, lacking the large abrasive wear on piston rings and that can withstand the corrosive environment resulting in engines equipped with EGR.

Laser Scanning is a method of surveying that has evolved rapidly in recentyears. The technique is based on a laser scanner set up, which can document a structureusing pulsed laser beams. Each time the laser hits a surface it is partly reflectedback to the scanner that stores the point. By using strategically placed targets, storedpoints from different scans can be merged into a point cloud. A point cloud is avisualization of the scanned object with a very high accuracy.

The requirements for operative planning activities are increasing. The forest industry wants to gain better control over wood flow. A felling that is more market adjusted is desirable. However, this causes problems in the operative planning process because of the data collection methods used today. Data about timber assortments and data about the distribution of the tree diameter, etc., are often lacking. Airborne laser Scanning is used to a greater extent than before for estimation of forest variables and should perhaps be used to the same extent in operative planning activities as well.

The perioperative nurse's primary responsibility is to care for the patient during the operation?s three phases; before, during and after. The communication between colleagues in the surgical department is increasing opportunities for safe care for the patient and a good dialogue with the patient can alleviate the concerns facing the unknown environment such as an operating theater. The pilot study was to investigate the surgical nurses' perceptions of conversations with the patient one year after graduation. To answer the pilot study's aim a qualitative interview study was chosen with a phenomenographic approach.

The aim of this thesis is to examine Social science teachers infor-mation seeking in their professional role.The focus in this study has been on what sources the teachers use for information seeking, examine and analyze their information practices and how they state their reasons for using different in-formation sources, and finally how these teachers experience con-ditions related to information seeking and how these conditions in-fluence their information seeking.This study is based on four semi structured qualitative interviews. The empirical material from the interviews has been compared to earlier relevant research and analyzed with a theoretical frame-work, which includes conceptions from a sociocultural perspec-tive, a matrix over different kinds of information sources devel-oped by Höglund och Persson and McKenzie?s model of infor-mation practices.The results of this study are:- These teachers use both formal and informal sources and external and internal sources. Digital sources are important and these have consequently been added to Höglund och Persson?s original matrix from 1985.- Information practices tend to overlap each other, for example ac-tive seeking (more specific and prepared information seeking) and active Scanning (less specific), which are the two most common information practices among the teachers.

Lantmäteriet (the Swedish mapping, cadastral and land registration authority) has been laser Scanning Sweden since 2009. From the laser scanned data a digital elevation model (DEM) in grid format, with a resolution of 2 m, is produced. This DEM is called GSD-Höjddata, grid 2+ and from its data and the laser point cloud itself (in the form of a las-file) contour lines can be extracted. Lantmäteriet has not yet done this, but plans to update the contour lines in their cartographic products exist. If this is to be done in a satisfactory way an evaluation of different methods for it is needed.

The wide spread of the Internet and new information technologies in recent years has come to effect how libraries manage and disseminate information. Search engines like Google are widely used by people who often find the information retrieval systems of libraries to be too complicated. In 2004 Google announced plans to digitise five major library collections. Organisations representing the publishing industry and authors have since then filed lawsuits against Google claiming that Googles Scanning of library books infringe the rights holders copyright. Due to Googles potential impact on libraries this thesis aims to examine how Googles digitisation project, Google Book Search, has been received in the library community.

Today every organization is committed to some kind of environmental Scanning in order to get necessary knowledge of the world around them. The acquisition, organization and storage of information in combination with a strategic use, is today an important factor for a successful organisation in any sector of our society.In this Master thesis I have studied how an organisation such as The Confederation of Swedish Enterprise (Svenskt Näringsliv) handles its information resources. I have also looked at the flow of information within the organization. The Confederation of Swedish Enterprise is Sweden?s largest business federation representing 50 member organizations and 55 000 member companies.

The interest in harvesting wood fuel in conflict stands has grown in recent years as a consequence of the increased demand for biofuel. Conflict stands are young forests that have not been cleaned and have a large number of stems ha-1with a great height and diameter distribution. This means that traditional field measurements in conflict stands are difficult and very time consuming. Therefore, the forestry sector is in need of new, more efficient inventory methods. In this study, the Lidar data from Lantmäteriet?s (the Swedish mapping, cadastral and land registration authorities) new national height model was used in combination with plots from the Swedish national forest inventory from 2009 to create functions for; height, volume, diameter and number of stems.

This thesis includes an energy survey of the Herrgården pre-school, which has a modern heating- and ventilation system, and a comparison with Östers pre-school which has an older system. An energy survey of Östers pre-school has already been done by a group of three students and all the calculations and values have been collected from that survey. As of today, both pre-schools are heated thru district heating. It will be much easier to make smart and feasible energy-saving-measures by first conducting the energy survey.Herrgården pre-school in Gävle houses 81 children, therteen teachers, one cleaner and one cook. It was finished in the middle of 2009 and the staff has been very pleased with the in-door climate.