The purpose of current paper is to identify the differences (ifany) between Swedish and Turkish consumers in terms ofproduct design perception and to identify the differences toproduct design in relating the four dimensions / characteristics:1.Aesthetical attractiveness, 2.Functionality, 3.Value and4.Quality.The findings of the study indicate the existence of a universal perception of design. Despite the culturally different countries that are examined the empirical material consistently display similarities between the two countries. Both the quantitative and qualitative data point to a very similar perception in terms of design. The possibilities of global design are discussed for companies as well as managerial implications and future research..

This thesis investigates how energy is used in three public baths today and suggests measures that could reduce the energy demand. The results show that there is a great poteltial for energy savings i public baths, and that it would be interesting to examine some of the proposed measures further..

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

Syfte: Syftet är att beskriva och analysera framväxten av nya kommersiella etiska konsumtionsfenomen och dess påverkan på konsumentkulturen. Metod: Magisteruppsatsen bygger på en kvalitativ litteraturstudie som kompletterats med en empirisk case-studie av fenomenet (PRODUCT) RED. Allt emiriskt material är inhämtat från Internet under olika tidpunkter från och med mars månad till mitten av maj 2008. Empirin grundar sig bland annat i diskussioner vilka bedrivits på sociala nätverk på Internet och där främst inom grupper på Facebook. Materialet sträcker sig tillbaka till (PRODUCT) RED etableringen i mars 2006, vilket innebär att urval av inlägg och bloggar från olika diskussionsforum inhämtats under hela denna tidsperiod.

There are several Project Management Softwares onthe market today. These tools are powerful andextensive to the degree they become too timeconsumingand complex and therefore often defeatits original purpose. This is the case especiallywhen the project manager is inexperienced and/orthe scope of the project is moderate.The purpose of this thesis arose from this context,there seems to be a gap between a home-made MSExcel spread sheet and the advanced softwaresavailable. The thesis and the product has beendeveloped in alliance with Faveo ProjectManagement with the shared goal to create a toolwhich is easy to use but still covers the essentialareas of project management theory. The tool willbe used internally by Faveo-employees as well asexternally together with Faveo?s clients in aneducational purpose.

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

Den allt hårdare konkurrensen på marknaden gör att det blir alltviktigare för mindre tjänsteföretag att utvärdera sitt val avproduktkalkyl.Syftet med denna uppsats är att undersöka El- Företaget AB:sproduktkalkylering samt ge förslag till eventuella förbättringar genomatt jämföra med befintliga och lämpliga produktkalkyler.Resultatet i denna undersökning visar att påläggskalkylen är den mestlämpade kalkylmetoden för El- Företaget AB. Företaget använder sig avdenna modell idag men i slutsatsen har vi konstaterat att det krävsförbättringar. Dessa förändringar bör genomföras för att företaget iframtiden ska kunna jämföra och kontrollera sina kostnader på ettbättre sätt.Because of the competition on the current service market it is moreimportant to minor service companies to evaluate there choice ofproduct calculation.The purpose is to examine El- Företaget Ab:s product calculation andsuggest possible improvements by comparing with existing andappropriate product calculating- methods.The result in this survey shows that absorption costing method is themost suitable one to use by El- Företaget AB. The company uses thismodel today but through the conclusion we have worked outimprovements. These changes will be made to compare and controltheir cost in a better way in the future..

This thesis investigates how energy is used in three public baths today and suggests measures that could reduce the energy demand. The results show that there is a great poteltial for energy savings i public baths, and that it would be interesting to examine some of the proposed measures further..

The idea for the project emerged when Nilorn wanted to get better control over their supplychain and improve operational efficiency. The company also want to reduce their expenses inthe continuous process of improving profitability. By choosing the right option oftransportation and mode of transport there are large potential savings for the company. Thisenables Nilorn to reduce the transportation costs and strengthen the environmentalresponsibilities by reducing their environmental impact.The flow of goods within Nilorn has over the past years increased significantly and most ofthe gods today is transported by air. The aim of this thesis is to analyse the supply chain of thecompany and evaluate the potential economic savings in this area.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

AbstractThis text deals with one of the preschool everyday routine chores, and the phenomenon I have chosen to investigate is the hallway situation. The purpose of the study was to see if the hallway situation offers good communicative interactions between children and teachers, and investigate if the teachers use special strategies to make the hallway situation work. The method of this study was survey, qualitative interviews and observations. The three methods have deliberately been selected to best suite and reply to the different issues.Today?s groups of children in preschool are very big, and some of the preschools are not adapted to these large groups of children that we have today.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.