This diploma work has been carried out in collaboration with the building contractor Sh Bygg Fastighetsutveckling AB in Uppsala with the intention to investigate how the height of a building affects various energy aspects such as transmission losses, infiltration, and the specific energy usage. Three different reference objects have been studied. The reference objects have been simulated for four different heights in the calculation program VIP-Energy.The results show that an increase in floor number can lead to both advantages and disadvantages. As the number of floors increases, transmission losses per square meter floor area decreases. However, as the height of the building increases, the reduction rate decreases.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.

Syftet med denna uppsats är att undersöka huruvida en aktiv individ får högre framtida pensionsutbetalningar än en individ som låter kapitalet vara kvar i Premiesparfonden.Vår undersökning har en deduktiv ansats, då ekonomiska teorier har utgjort grunden för de beräkningar som har gjorts. Beräkningarna bygger på hårddata, i form av historiska fondvärden, och studien är därmed kvantitativ. Tidigare undersökningar och beräkningar används för att styrka uppsatsen, som i och med detta är en sekundäranalys.  Den placeringsstrategi som visade sig ge högst framtida utbetalningar med hänsyn tagen till risken var den aktiva placeringen. De portföljer som de aktiva premiepensionstagarna har att välja mellan i vår studie, ger alla högre framtida utbetalningar än Premiesparfonden. Vidare kan tilläggas att Premiesparfonden är ett av alternativen som har för hög risk i förhållande till dess låga avkastning.Det skulle vara intressant att om några år, då Premiespar-fonden har förändrats till generationsfonder, göra om denna studie och då undersöka om detta leder till högre pensionsutbetalningar för de icke-aktiva premiepensionstagarna.Denna studie bidrar med och stärker, genom konkreta exempel, det som en del andra författare redan påpekat, att de icke- aktiva premiepensionsspararna får lägre framtida utbetalningar än de som är aktiva i sitt sparande..

AbstractProblem: This thesis was made by a commission from Svensk Logistikanalys AB (SLA). SLA is a relatively new firm who is working as a freight broker for firms that wants to lower their freight costs. SLA contacted Jönköpings international business school because they experienced a problem with too many firms, that had SLA?s concept introduced to them, but turned down their services. On the basis of this, following purpose of the report has been stated.Purpose: In this thesis we will study companies that have said no to the services of SLA.

Företag: Midelfart Sonesson ABSyfte: Studien skulle ge en bild av vilka kriterier som är betydelsefulla för företag vid rationalisering av lagerställen. Den skulle dessutom ge en bild av vilka tänkbara ekonomiska konsekvenser som kan följa efter en rationalisering. Genom en fallstudie av ett typföretag och genom kompletterande intervjuer med kunniga inom logistik och företagsekonomi skulle författarna undersöka vilka kriterier som företagen lägger mest vikt på när de ska starta ett så stort projekt som lagerställesrationalisering, samt förstå vad kostnadsbesparingen kan bli.Metod: En studie av företaget Midelfart Sonesson AB har utförts. Primär- och sekundärdata har samlats in genom personliga intervjuer, litteratur, rapporter, och elektroniska källor.Teori: Teorin består av nio olika avsnitt som kan tillämpas på ämnet i uppsatsen. Teorin används för att förstå företagets uppbyggnad, organisation och dess handlande.

This thesis work includes studies and simulation how magnetization of the translator in a linear generator for wave power can be automated. The translator is the moving component in the generator that is "dressed" with permanent magnets. The translator is magnetized with rectangle-shaped permanent magnets that are today's strongest permanent magnet type of neodymium-iron-boron (NdFeB).Eight equivalent metal sheets are mounted around the translator. The plates have milled tracks where 106 permanent magnets per sheet are mounted. Today the assembling of the magnets is done by hand, which is a very tedious and time-consuming work.  This project presents investigations about the automation of the translator magnetization theoretically and simulation results are preformed in ABB's robot simulation software RobotStudio. Even robot-held tool was designed that enables the robot to be able to magnetize the translator in a simple manner.  The investment cost is roughly 1.5 million SEK. With an economic life-time of five years, the investment costs are estimated to 24000 SEK / month.  According to the calculations, this project is very motivated to implement, as it provides savings up to 17 000 SEK per translator which is 10.2 million SEK assuming that the robot cell is operating at full speed the whole year.According to this thesis work the result is a 4x9 meter cell with two industrial robots of the type ABB IRB6650S.The cycle time to magnetize one translator was calculated to about 10 hours.This prototype of project can possibly be implemented in a full-scale production line and performed according to the calculations and simulations presented in the report. Further work is suggested to improve the tool.Lyssna .

A new FPGA suitable for space applications has just reached the market. To investigate whether there are any possible flaws or limitations similar to those previously seen on FPGAs, an evaluation has to be done. This master thesis contains the evaluation of this new radhard FPGA with focus on possible design limitations and package related electrical phenomena.Areas evaluated: Ground-/VDD bounce, Cross talk, Rise time sensitivit, Power cycling, Power consumption, Place and route tool, Radiation hardnessThis report contains all steps in the evaluation. From method to measurements, comparisons, theory, results and conclusions. In the evaluation work, special effort has been made to develop designs that really stress the FPGA to find potential problems.

Background: Long-term stress can lead to reduced health among nurses which can result in impaired quality of care. Stress in nurses' work needs to be studied in order to prevent stress and impaired quality of care. Aim: The aim of this study was to describe nurses' experience of occupational stress and factors that contribute to occupational stress. Method: The method used was a literature review. Results: The analysis resulted in five themes which describe nurses' experiences of occupational stress and factors that contribute to occupational stress.

The technological legacy from the early electrification of the Swedish railroads has resulted in a power grid with a lower grid frequency than the national power grid from which it is fed. Energy transfer between these power grids with different frequencies requires substations, adapting the grid frequency for the rail road power grid. For this purpose, a feeding power grid has been built, stretching across the country from Boden in the north to Tälle/Häggvik in the south.Power transfer in the Swedish power grid results in voltage angle differences which increase with increasing loads and transfer distance. These voltage angle differences are transferred from the power feeding substations to the rail road power grid, will in some extent cause loss of energy due to unwanted power flows from north to south.To minimize the losses due to this phenomenon, a power management system called EFS 132 kV has been developed and implemented. The system minimizes the unwanted power flows and controls the desired power flow for a good distribution of loads between the power feeding substations.This thesis investigates the extent of the transmission losses avoided due to the EFS 132 kV that coordinates the idling angles to a common reference point.The results indicate that EFS 132 kV affects the power flow, especially between the northern substations through an improved load distribution.

Kreditbedo?mning a?r ett viktigt verktyg fo?r de svenska storbankerna i rollen som kapitalfo?rmedlare fo?r fo?retag. Den kan baseras pa? de 5 C?na och genomfo?ras pa? flera olika beslutsinstanser. Det finns ett praktiskt och ett teoretiskt problem i hur bankerna skall organisera kreditbedo?mningen da? tidigare forskning a?r oense om prioriteringen i kreditbedo?mningen pa? olika beslutsinstanser och vad som fo?rklarar det.

Influenza is a viral infection that affects global health and economy with its endemic and sometimes pandemic spread. Rapid detection of Influenza viruses enables antiviral use and can bring financial savings. It is also essential for the global surveillance of prevalent Influenza strains. RT-PCR is considered the most specific and sensitive method for detection of Influenza, but Influenza mutates at a high rate and it is therefore crucial that RT-PCR methods are updated regularly.In 2014, Cepheid released their Xpert Flu/RSV XC assay, which can detect Influenza A and B and RSV by multiplex RT-PCR in approximately one hour. The aim of this study was to evaluate this assay at Laboratoriemedicin Västernorrland by using the laboratory?s previous PCR assay for detection of Influenza viruses as reference method.Real-time RT-PCR was used to compare Xpert Flu/RSV XC to the reference method.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

In today?s computerized society more and more companies choose to utilize new applications that can ease the way of handling the information. For many of us is imperative that the process as efficient as possible if one takes in consideration the size of savings that this new application can bring.The developer of the evaluated system is SYSteam AB Huskvarna and they are the ones that gave us this assignment. The application that we evaluate is SCM (Secure Connection Manager). It is already used today by big companies such as Telia and Ericsson to search for errors in telephone servers placed all over the country.

In 2013 a new emission standard for heavy trucks was introduced and hence a number of new parts was brought in to Scania CV AB. This created a need for modifications in the silencers flow. The flow is highly complex involving several suppliers, call off methods and different models of silencers. The aim for this project was to improve the existing silencers flow. The flow, from supplier to assembling, has therefore been mapped.

Banker är enligt lag tvungna att göra en bedömning av företags återbetalningsförmåga vid kreditgivning. Redovisningsinformation är en viktig bedömningsgrund vid kreditgivning och kvalitén på informationen är avgörande för beslut gällande utlåning. Det är revisorns uppgift att genom granskning kvalitetssäkra ett företags redovisning och förvaltning och resultatet av detta lämnas i en revisionsberättelse. Revisionsberättelsen är den enda offentliga rapport som revisorn lämnar och därmed den som intressenterna kan ta del av. Syftet med denna studie är att undersöka vilken betydelse revisionsberättelsen har för bankerna vid kreditgivning till företag.