The thesis demonstrates a low-cost, low-bandwidth and low-resolution Analog-to- Digital Converter(ADC) in 0.35 um CMOS Process. A second-order Sigma-Delta modulator is used as the basis of the A/D Converter. A Semi-Uniform quantizer is used with the modulator to take advantage of input distributions that are dominated by smaller-amplitude signals e.g. Audio, Voice and Image-sensor signals. A Single-bit feedback topology is used with a multi-bit quantizer in the modulator.

För att underlätta vidareutvecklingen av dagens programvara har jag fortsatt att utveckla den simuleringsmiljö som redan finns på företaget idag för en av produkterna som används vid mjölkning. Simuleringsmiljön skall underlätta utvecklingen av större system för större gårdar. Det som systemet hjälper till med är just uppsättningen av en gård med ett visst antal kor och ett visst antal mjölkningsmaskiner. Den tidigare miljön var skriven i MFC men för att möta morgondagens krav har denna blivit omskriven till C# .NET med hjälp av Windows Forms. Det program jag skrev först använde sig av C++/CLI vilket var väldigt krångligt att använda, det resulterade i att jag helt och hållet gick över till C# .NET.

The behaviour of the red-tailed guenon (Cercopithecus ascanius) was studied over the course of nine days in the Sabaringo forest surrounding Kichwa Tembo Tented Camp near the Masai Mara National Reserve, Kenya. A focal animal instantaneous sampling method with a one minute interval was used to record the behaviours of the monkeys for approximately 12 hours a day, the day being divided into six shifts á two hours. This method has proven successful in earlier studies of red-tails in this area. The study subjects included both lactating and non-lactating females, juveniles and on some occasions the resident male. The purpose of this study was to examine the grooming behaviour of red-tailed guenons and whether or not the occurrence of grooming varies depending on monkey type (lactating or non-lactating) and time of day.

This degree project studied surface waters on Kåbo Golf Course in Uppsala, Sweden, with the aim of determining the status of the water and how it is affected by the activities of the golf club, and to obtain suggestions of measures to create better conditions for the water environment on and around the golf course. The project forms part of the environmental protection work of Kåbo Golf Club, which is working towards achieving environmental certification from the Swedish Golf Association (SGF). The study is based on literature studies and quantitative and qualitative field studies of water on the golf course, with the focus on environmental factors identified as being important for the golf industry and on strategic environmental goals developed by SGF. The number of open water bodies in the Swedish landscape has substantially declined during the past 200 years, so it is important to save those that remain. This study showed that the surface water at Kåbo Golf Course is an important element in the surroundings since the area contains few wetlands, which can be a habitat for large numbers of species. The stream and ponds on Kåbo Golf Course also have the important function of serving as water hazards in the game and adding difficulty and variety to the course. Since Kåbo Golf Club wants its surface waters to look aesthetically appealing, extensive algal growth and drying up of ponds during parts of the year are regarded as problems.

Att den illegala fildelningen är ett problem för den svenska filmmarknaden som måste bekämpas är något som Antipiratbyrån vill framhålla. Piratbyrån å andra sidan menar att problemet inte är så stort och inte ens värt att lägga energi på. Vi ville därför undersöka hur den illegala fildelningen verkligen påverkar den svenska filmmarknaden. Detta gjordes genom att först intervjua både Antipiratbyrån och Piratbyrån för att få fram olika synsätt på problemområdet. Vi gjorde även en litteraturgenomgång där vi fann relevanta teorier som vi utformade vissa antaganden utifrån.

Abstract The benthic macroinvertebrate fauna of 22 natural springs on Öland was sampled, by using a time-standarized kick/sweep sampling technique, in the end of September and early October. The aim was to determine the number of species and their abundances in the macroinvertebrate communities in springs and how/why these may change between different springs. Likewise there was a purpose to investigate possible differences between springs considering the proportions of the number of species and the abundances of the five functional feeding groups; shredders, collectors, filter-feeders, scrapers and predators. There was also an aim to investigate if the distances betweeen springs had any influence on similarity between the communities of benthic macroinvertebrates of the springs. Analysis from the springs collected material showed several interesting patterns in the number of species and their abundances when compared between springs devided into groups depending on their environmental factors such as depth and pH.

A new material model, for the FE-program ADINA, has been verified against twoexperiments. One unreinforced concrete beam and one reinforced concrete beam.The model, DF-concrete, has the possibility to estimate true concrete. However theresults indicate that in order to be sure that the estimations are true, there ought tobe data from the true concrete to verify against.Two FE-models have simulated the behavior of a ring-shaped part of the nuclearcontainment vessel. The results from the first, frictionless, model agree with similarsimulations and hand calculations for high pressures in the containment vessel. Thesimulations of the nuclear containment vessel show cracking in the concrete after10-11 bars of over pressurization.

För att äldre personer ska kunna utföra meningsfulla aktiviteter och känna gemenskap med andra krävs att de kan transportera sig. Det är viktigt för att bibehålla god hälsa och uppleva livskvalitet. Många äldre har svårighet att transportera sig med vanliga bussar på grund av funktionsnedsättningar som kommer med stigande ålder. Syftet med denna studie var att beskriva vad En buss för alla har för betydelse för äldres delaktighet i samhället. Studiens design var kvalitativ, en målinriktad sampling gjordes och undersökningsgruppen valdes ut från förutbestämda kriterier.

The project Design analysis and proposals of plastic screw caps in Australia was performed at Högskolan Dalarna incooperation with University of Western Sydney, Australia. The Swedish company Tetra Pak, in Lund, were assigner forthe project that was performed 2006-2007. The commission was to do a survey about the packages for non-carbonateddrinks in Australia. The bottles had to be plastic, able to open in one step and with focus on the caps.The project has result in design analysis and a new proposal of a plastic screw cap for the Australian market. Sixbottles were choosen and they were all testet on 20 consumers each with a Likert-scale test.

The purpose of this thesis is to through brand communication and Red Bull?simage examine how they position themselves as leaders on the Swedish energydrink market. We chose relevant theories within buzz marketing, word ofmouth, sampling and events. Our method of preference was quantitativequestionnaires which we spred through email to students at the LinneausUniversity and other social networks such as Facebook and blogs. Our empiricalstudy is based on our questionnaires and information about Red Bull.

During the work at Gateway Security AB in Motala I began examining available antenna models to get a wider perspective, this have given knowledge of their structure, and an understanding of their function. All my necessary fact is based on my observations and notes of these measurings. New antenna models, and available models were examined where measurements at different heights and different distances on the antenna were performed with the help of an oscilloscope and a measure probe, peak ? to - peak was brought on the signal. The measurements are presented in a line diagram.

This master thesis takes its point of departure in the conflicting worldviews of modernism and post-modernism. As traditional segmentation theory springs from the modernist worldview, this study aims to contribute to the understanding of the complexity regarding market segmentation for lifestyle brands in contemporary society, where the consumer is often claimed to be post-modern. The research was conducted in Malmö and Lund and involved 25 Converse users as respondents. The methods used in this thesis starts with observations as a sampling technique in order to locate the respondents. Short interviews and photo documentation followed.

This thesis describes a system for dealing with free surface fluid simulations, and the components needed in order to construct such a system. It builds upon recent research, but in a computer graphics context the amount of available literature is limited and difficult to implement. Because of this, the text aims at providing a solid foundation of the mathematics needed, at explaining in greater detail the steps needed to solve the problem, and lastly at improving some aspects of the animation process as it has been described in earlier works. The aim of the system itself is to provide visually plausible renditions of animated fluids in three dimensions in a manner that allows it to be usable in a visual effects production context. The novel features described include a generalized interaction layer providing greater control to artists, a new way of dealing with moving objects that interact with the fluid and a method for adding source and drain capabilities..

Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels.

The focus of this project has been on the drainage tank of the reheater on Ringhals 1. This tank has on two previous occasions received such a high water level that the system automatically emergency stopped. For this reason, events and various readings from these two occasions has been specifically studied and analyzed. In order to prove theories about what causes these problems a model of the system was created in the program Dymola. Using simulation results from the model, we have been able to demonstrate how the system's measured values should look likeunder normal conditions with respect to flows, pressures, temperatures, valve positions and water level in the drainage tank.