EAS-tagg med fuktsensor
Design och utvärdering av EAS-alarmteknologi för fuktdetektering
Electronic article surveillance (EAS) is widely used in shops and libraries together with an RF-tag attached to the goods or books in order to prevent shoplifting. By implementing the addition of a moisture sensor to the RF-tag, other functions become possible, including the ability to use as an alarm with regards to frozen goods, which have been shipped but which have melted and have, subsequently, refrozen. In- relation to care for the elderly, one time-consuming step involves checking whether there is the necessity for a change of diaper and this can, instead, be based on an RF-tag with an EAS-system alarm. A preliminary investigation was made using the moisture sensors, which involved how the resistance changes when liquid and/or heat is applied. A simulation of the LCCR circuit (RF-tag with the sensor) was conducted in order to determine how the resonance frequency changes for different resistances levels. When the moisture sensors are applied to the RF-tag with the correct resistance no alarm will be triggered, but will be triggered when water is added to the moisture sensor. In order for the tag to be able to induce energy from the transmitter in the EAS-system the resistance must be less than ten ohms in relation to the entire tag. Results show that the implementation of the sensor on the RF-tag is possible and that it works in a satisfactory manner.