Extended Producer Responsibility (ERP) is a form of product take-back regulation that requires the producers to manage their products at the end of life. By internalising the products? entire life cycle costs into the market price the ultimate objective of such regulations is to reduce the environmental burden from the products. This Master´s thesis seeks to examine if the total life cycle cost of a product actually is borne by the producer, and if not, predict who will then take this cost. This is done by analysing the market for take-back activities in three different categories of products; electrical and electronic equipment, cars and wind power stations.

This paper, Personal safety when working with weather encapsulation constructions, is focused on weather encapsulation constructions and how the absence of Swedish standards and regulations is affecting the safety for the workers. The usage of weather encapsulation construction is increasing in Sweden therefore the needs for standards and regulations are becoming more and more urgent. The risks involving the rising and the demolition of the weather encapsulation construction and when the construction is transported along its rails are treated in the paper. Since there are no regulations companies have had to solve the safety issues without instructions, the paper regards how the companies have solved this problem without the support of formal institutions..

The essay aimed to investigate whether people choose light products or original products regarding dairy products and beverages as well as the motives for their respective choice. Finally the purpose was to find out where they had obtained the knowledge to make their choice and how they thought media had affected their choice. The method used was a qualitative decsriptive study with three focus groups consisting of six women aged 40-50, six women aged 20-30 and four men aged 25-35. Each interview lasted 2 hours. The groups were a selection of comfort.   The results showed that all respondents choose original products. The primary reason was because they thought that original products tasted better and had a better consistence.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

The aim of this report has been to investigate the use of electricity energy before and after a conversion of foodservice. The ambition was also to highlight the food safety and the retention of nutrients in relation to the conversion. The methods being used were qualitative interviews, case studies, study visits and literature. The equipment and the use of energy was the same in 2008 as in 2011 for hot-holding of the tested component, sauce with ham. The chilled system used more than three times the energy and cost for one portion than one portion in the hot-hold system.

Workplace accidents in Sweden have in recent years increased. Companies are at the same time putting a greater emphasis on preventing accidents and inform about safety and risks. Therefore there is a need to know how to visualize this safety information. This study is based on a part of a project proposed by the industrial company AB Wahlquists Verkstäder, in which they want to visualize their safety information for new employees and existing staff, and also for temporary contractors and apprentices. The purpose of this study is to see what is required of the visualization of safety information and what guidelines that should be followed.

Stockholm city has recently raised its ambitions for bicycle traffic, the goal is to achieve a larger andsafer bicycle traffic. But cyclists are more vulnerable on the roads than other vehicle users because of the lack of protection. This means that a large proportion of road safety for cyclists is based on the design of the traffic environment. Since most serious bicycle accidents are those that occur in conflict with motor vehicles, and the majority of these accidents occur at intersections, these areas are of great importance forcyclist?s safety.The  purpose  of  this  paper  is  to  highlight  bicycle  accidents  at  intersections  and  to  suggest improvements  in three accident-prone junctions  in Stockholm.  This is  achieved  by  the study of accident statistics, literature and finally three case studies.The literature study focused on cyclists, traffic safety and traffic safety measures.

This study examines if there are any behavioural differences in-store between consumers who choose a healthy product and consumers who choose a regular product. 540 observations were conducted were different variables were studied. Tthe results indicate that there are some variables that show a significant difference in behaviour at the point of choice between consumer who choose healthy products and those who choose regular products..

The purpose of this study was to try to understand the Swedish population regarding the perceptions of the Swedish welfare system, based on the reactions that occurred after Sweden's Prime Minister Fredrik Reinfeldt's statement about raising the retirement age. Our results demonstrate that the reactions on changes in the pension system in fact rooted in a safety factor and not the change in the pension system itself, through which the Swedish welfare system acts as a safety net for the population. Further the results shows that these safety factors create a form of egoism. With an interaction between empiricism and theory, where the starting point of the material was of an inductive approach, the material abstracted into different levels from which the result emerged. The focus of this study lies in the understanding of how human beings act according to one's need for security in major changes, which may be of importance to a comprehensive understanding of changes in social structures..

This report details the development of an application for personal safety for the Android operating system. Android is a relatively new platform, primarily used on mobile phones.The purpose of the developed application is to give the user the possibility to easily and quickly alert a number of contacts by phone in case of emergencies, and to show the user?s location on a map. This is not only used during emergencies, but for other purposes as well ? for example to monitor a jogging round.The project was carried out in co-operation with the company D-Safety, the developer of the "SoftAlarm" ? the product on which the developed application is based..

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

Road design with focus to safety has been extensively developed in last decades in Nordic and some other EU countries with the main aim to achieve a decrease in a number of accidents and fatalities on the roads. These countries gained many valuable experiences, but they had to sacrifice great effort, expenses, and time to reach the present art-of-state. The purpose of the Master?s Thesis is to review some design approaches with focus to safety and discuss the general way that they may be applied. The Master?s Thesis studies safety in three levels: (i) general - design standards, national safety policies and road hierarchy; (ii) local authority and road administrator; and (iii) three specific safety countermeasures - junctions, pedestrian crossings and traffic calming.

The purpose of this thesis is to investigate whether placement, using a special display, of ecological products, will have an effect on consumer buying behaviour and thereby sales of these products. When talking about sales we refer to the amount of ecological products that are being bought, habitual and unplanned, as a response due to the placement of the products in-store. To further elucidate the purpose, the thesis will focus on if the placement of the products itself will have an impact on the customers? attitude towards buying ecological products. A deductive approach was applied where we did a quantitative study using triangulation to receive data to reveal if the placement of ecological products had any effect on the sales of these products.

During the 1990?s a large number of building projects were revealed where lack of moistsafety precautions during the construction process had led to extensive moisture damage. Alsoresent implemented studies have shown that the problems with moisture damages have ratherincreased than decreased during the past few years. Moist is considered to be one of the mainfactors to cause unhealth due to deficiencies in the indoor-environment and does also causeunnecessary expenses and a reduction of the confidence in the construction industry.In this Bachelor of Science thesis three projects have been reviewed to examine how moistsafetyhas been observed during the construction process. Main focus has been to identify thebuilding components that are the most exposed to moist, and to examine how they have beentaken into account during the period of design and construction.