This report contains a degree project made by the mechanical engineering students Lennart Andersson and Daniel Jansson. The project has performed in assignment by SOMAS Valves AB in Säffle. SOMAS are leading in development on control and on/off valves. To maintain this position they always want to improve their products. One way in this development is valves that are more tightened.The purpose with our project was to investigate another seat design on a HiCo (High Cobalt Alloy) seat to a SKV 150 PN 25 valve and compare this to an original HiCo seat.By modifying the seat on a ball valve we want to achieve a valve that leaks lesser then a valve whit original seat.

AbstractToday, too many construction projects are delayed and deviates from the budget. Agood project management is the basis for successful construction project. The mostcommon planning methods in the construction industry is currently Gantt chart andCPM. The problem with these is that focus is only at the time of the project anddoesn?t handle the budget.

This project is implemented as a thesis at the Royal Institute of Technology in the master?s degree program Integrated Product Design and Industrial Design Engineering. The project has involved development and efficiency of a free starter package for expectant parents with useful content consisting of useful products for both before and after childbirth. Areas that have been investigated include packaging development, service design and appropriate content for the package.During the work, theory about packaging design, materials, manufacturing techniques and logistics have been processed to base the further work on. The project process has involved competitor analysis and interviews with store owners and customer surveys, that have been conducted to identify areas for improvement of the current solution.

This thesis has been adjusted because some parts are classified, some sentences might have been changed. Electric bikes are a convenient mode of transport, a good choice when long distances or tough slopes can be an obstacle.The goal of the project was to create a prototype on a locking mechanism with an inductive charger for electric bikes.The idea behind the project was to develop a user-friendly locking mechanism, where the bikes would be charged inductively when they were locked. To implement the project facts about induction, battery charging and locking devices was needed to be acquired. Circuits for induction charging were created and a lock device was constructed. A microprocessor was used to control the entire system.A prototype was designed with a locking device and an inductive charger fixed in a bike rack.The entire project became very wide which resulted in that not all of the parts of the project could be completed.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

This is a bachelor thesis about arable land in Varberg, from sustainability and it?s relation to local government and management. Arable land has become more important as a natural resource from a global point of view and in concerns of higher demands of food supply, as a result of population growth, higher consumption worldwide and climate change. But the arable land in Sweden is being exploited an increasingly rapid pace and the arable land in Varberg is not an exception of this development. The issue is most topical and the discussion holds questions about a declining agricultural sector, the formal and administrative protection of arable land and because other interests of land use often is given higher priority in community development and planning.

This study has been performed at a smaller high school and with its industry students, the high school is located in a small industrial community. The purpose of my study has been to find out what students think about their work with the project work, what they think has been positive and negative, how their motivation is influenced by the work on the project and if the work has been affected by factors outside the school world.The interviews have been carried out like normal conversation with open questions. The students who participated in the study comes from the school where I did my internship. The selection was done by asking all students from a specific course, those who were positive to participate are also the ones I have chosen to interview. My main study results, in summary, described as the students, once they were inside their work were positive to the project work and felt motivated in their work. Negative experiences, for the students which attend a practical program, has mainly been economic, as the school does not provide any financial support.

A large number of system development projects are allowed to proceed for too long, and leads to undesirable project outcomes. Research shows that more than half of the authorities involved reported that at least one of their projects have exceeded their budget, and that a third of all the projects had exceeded the budget. This problem led to the following research question: ?Which factors can explain projects continued escalation within public authorities?? To answer the question, a qualitative case study of the Swedish police?s implementation of PUST, a sort of case management system was conducted. The project received considerable media attention and a large amount of criticism was directed towards the project, partly because the project exceeded the timeframe and budget set at the start.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

This degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

VSEM project and the need for a more efficient way of handling requirements andinformation are highly apparent.The overall objective of this thesis is divided into two parts:1. To identify criteria/factors leading to a successful introduction of an informationmanagement system.2. To develop an implementation process for a requirement management system ?the first step towards a PLM system in EE development at VCC.This will be done through interviews with employees, a literature review and an analysisof studies of three earlier projects within VCC.The conclusion of this study shows the great need for change in work methods fordesigners handling information and requirements. An implementation process has beenidentified with guidelines on how to handle different phases of the process.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.

This is a study of an experimental project called ?Eget företagande ? egen försörjning?. The aim of this thesis is to explore if the course self-employment in Swedish for immigrants will become a permanent activity. The study is based on interviews with participants from the projects management team and the interviews has been analysed with methodological inspiration from Jonas Söderlunds project competence model. The focus lies in the participant?s perception of the project work and their thoughts about the permanent activity of self-employment in the future.

The aim of this dissertation is to examine and compare William Easterly?s and PGU?s (Shared Responsibility: Sweden's Policy for Global Development) different views on development and international development cooperation. The methodological approach chosen in this study is an analysis of ideas based on the following questions:1. Which principles should be applied to development and international development cooperation?2.