Opcon Powerbox is a product developed by Opcon together with the underlying company SRM (Svenska Rotor Maskiner) where surplus heat from the industry is used through an Organic Rankine Cycle (ORC)?process to produce electricity. An ORC-process is a thermodynamic circle process in which a refrigerant is used as the working fluid. The refrigerant makes it possible for the circle process to operate at lower temperatures than the conventional Rankine process.In this master?s thesis a data analysis software for the Opcon Powerbox has been developed in which measurement data is retrieved and handled from the Opcon Powerbox.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

Heat, clock scew and frequency optimization are some of the problems a semiconductor designer must face. By splitting a synchrounous block into multiple pieces which comunicates asynchronously with eachother and provide them with independent clocks, these problems may be reduced. GALS (Global Asynchronous Local Synchronous) is a wrapper that wraps a synchronous block and provides it with a clock. Multiple GALS-elements will make the whole system. The clockfrequency may be independently adjusted between each block.

The Swedish building and property management sector are responsible for about 30 % of the total energy use. In order to take environmental consideration, different environmental assessment tools and standards are used. Miljo?byggnad, Svanen, FEBY12 and PHI are some of these. There has been increased interest to certify buildings and therefore it is of interest to evaluate the assessment of the energy field to see if relevant energy aspects are assessed.

This thesis applies to a novel steam expander, one part of a steam engine system, a wobble plateengine. The piston in the expander moves axially with the outgoing rotating shaft and is locatedon a plate, why the engine type is called axial engine. When steam is applied to the plungers theplate wobbles creating a rotation on the shaft going thru the wobble plate. The steam expander issupposed to be used in exhaust gas recovery (bottoming cycle) applications and small scaleenergy production. The commissioner is Ranotor Utveckling AB.

Optimizing energy systems is, in Sweden, as in many other countries, of growing interest. District heating systems are no exception. In 2012, 285 out of 290 municipals in Sweden had district heating in use and the majority of these systems have a higher return temperature than that which is possible with an error-free substation of day current technology. To, when possible, lower the return temperature is a way of increasing the effectiveness of the district heating system.This study means to investigate, through simulations and calculations, how big of a reduction in production cost a lower temperature in the city of Ystad?s district heating system would correspond to.

The sun is an endless energy source and the heat it produces can be used to heatup our homes. This technology is relatively old and was introduced in the late70-s. There are two kinds of solar collectors that are most frequently used todayand these are plain solar collectors and vacuum solar collectors. The plain solarcollectors are the once that are used the most but the vacuum solar collectorshave increased more as a percentage the last couple of years.The biggest question asked regarding an investment in solar heating is if theplant is economically profitable. This question has no direct answer because itis dependent on a couple of prerequisites.

The purpose of this of this essay is to explore the construction of a conservatory that is livable allyear around. When you build a conservatory there are several factors that need to be regardedthat usually are of no importance when you build a regular conservatory. The glassed facadeneeds to have a very good U-value and all the parts of the facade need to be isolated and theconstruction needs to prevent thermal bridges.In this essay we will start by looking at the shape of the conservatory. Due to the façade consistsof glass the conservatory will need to have a good ratio between the area and the façade so thatthe heat losses will be at a minimum. However, due to the fact that one of the sides of the façadeis connected to the warm house, you quickly realize that the shape of the conservatory is of noimportance.There are two common ways to build a foundation for a conservatory, a molded concretefoundation and isolated wooden beams.

I detta projekt har vi fördjupat oss i en glidlagerkonstruktion som befinner sig i en skruvpress. Skruvpressen kompakterar en okänd massa som är sekretessbelagd. Robustus har ett förslag på överdimensionering av det nuvarande glidlagret. Målet med projektet var att analysera och optimera några glidlager i förhållande till det befintliga glidlagret samt att ta hänsyn till materialval och den miljö som lagret kommer att befinner sig i. Det som analyserna och optimeringen visade var att det befintliga glidlagret hade den bästa geometrin bland alla lösningar men inte det optimala materialet.

Sapa Heat Transfer AB (SHT AB) är en av tre delar inom koncernen Sapa Group, som ägs av det norska företaget Orkla ASA. SHT AB har produktion både i Sverige (Finspång) och i Kina (Shanghai). Företaget är en världsledande leverantör och utvecklare av aluminiumband som används i olika typer av värmeväxlare, främst inom bilindustrin.I flera steg av produktionen, som innefattar omsmältning, varm- och kallvalsning samt skärning, uppkommer ett skrotfall av aluminium. Detta skrot tas omhand och återanvänds som råvara i företagets omsmältverk. SHT AB har idag inget automatiserat IT-stöd för att prognostisera skrotavfallet, dessa beräkningar görs istället med hjälp av Excel.

This thesis researches the construction of the Swedish masonry heater called r?rspis. A r?rspis has an inner smoke channel system that stores heat and it was developed in the early 19th century alongside the Swedish kakelugn (tiled stove). Unlike the tiled stove, the R?rspis was commonly found in simpler environments and is part of the cultural her itage of the rural population.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

In this project the focus has been on the system for recombination at Oskarshamn 2. The recombining systems have on several occasions switched paths due to low pressure before the last ejector that?s feeding the recombiner. Of the mentioned reason, events and several measuring points have been analyzed in this report since the installation of the recombining systems.In order to prove theories and demonstrate what may be the cause of this problem, we used heat balance calculations by the program Probera. Using the program, we can demonstrate that the catalytic process does not reach the desired temperature with the amount of combustible substance.

This report is a study in voltagelevel in connection with regeneration of brake energy from the tramtype M31 in Gothenburg.In the act of braking, the tram M31 uses electrical braking where the electrical motors generates energy and if possible send it back to the overheadline, where other trams in the nearby can use this regenerated energy for its own driving force. In cases where no other energyconsumers are located in the same section, there is a resistance witch task is to convert this energy into heat. The regulation of this resistance appears to cause an increase in the voltagelevel into far too high levels.Investigations of the trams regulationequipment and its construction have been done. Further have measurements on the overheadline been performed in order to map the voltagevariations during a longer period of time.The result have been showing that the voltagelevel during regeneration often is as high as 880V-920V, more extreme values have not been observed in a large scale. The values are especially high compared to the nominal voltagelevel.