In recent years, awareness of the climate change has increased around the world. Environmental issues have been taking into consideration, both by individuals and companies. Therefore the demands for new environmental friendly technology have increased, also known as cleantech. To further establish and develop cleantech it requires capital. Venture capitalists have as well seen the potential.To increase the number of Venture capital investments in cleantech, it is important the investments generate good returns.

As organizations are generating more business intelligence in their systems, more employees need access those systems. As a result some sort of permission management needs to be implemented to ensure the information remain safe. Access Control Matrix (ACM) is one way of managing permissions and is widely used among organizations. The issues that comes with ACM is that the matrix itself gets difficult to manage and overview as its complexity increases with the number of permissions. The study utilizes Action Design Research to develop a tool for visualizing permissions.

This report is the result of a master thesis at the Department of Mechanical Engineering, Division of Industrial and Economical Development, at Linköping University of Technology. The project was carried out on behalf of Fanerami AB, Mjölby and includes 20 weeks of full time schedule work.Cabinets with vertical mounted roller shutters all share the same problem, namely weight balancing. A roller shutter has an equilibrium area where the sum of the different forces acting on the shutter equals zero. As the shutter leaves that area it will pick up speed as it falls towards the bottom. When the shutter hits the bottom of the cabinet there is a potential risk of getting fingers caught and in this project a solution to prevent this from happening was to be presented.In this project, three concepts have been generated with the following different purposes:?In concept 1 the risk of getting any fingers caught when the shutter closes was to be eliminated in an efficient and inexpensive way.?In concept 2 the roller shutter had to be balanced at all time providing the possibility to keep the cabinet open in any position.?The last and most challenging task was to create a remote controlled TV cabinet.

There is no further training in management in teacher education programs, which can create uncertainty among teachers in terms of management. According to the curriculum, the teacher should base it on a democratic approach, but how does it look in real life? The purpose has been to investigate how practicing teachers perceived management and their own leadership style, whether they made conscious choices and if so, whether they then had any purpose in their leadership style. Teachers' views of a good leader and how much influence students have on the teaching, enter into these issues.The survey is based on a qualitative research approach, based on interviews with four active teachers. Although observations were made they did not play any major role in this investigation.

The first version of the Swedish Code of Corporate Governance was published year 2004, by the code group, Kollegiet, after a mission from the Swedish government. The Code consists a collection of rules and standards about corporate governance and internal control, and the first version was intended to include incorporated limited companies on Stockholm?s alpha stocks, and also listed companies with a stock market value over three thousand million Swedish kronor. Now a few years have passed, and in July 2008 a new, revised version of the Code was implemented, now simplified and shorted, with the intention to include all joint-stock companies in Sweden. The Code contains rules about for example ownership, management commitments, annual stockholders meetings, and the accountant. This study intends to, with a qualitative research approach and an inductive reasoning, through studies of empirics in the subject, review whether the accountant?s profession has been influenced by the Code.

A Biogas plant in SLU?s (Swedish University of Agricultural Sciences) management sustains to behave in con-nection with the new animal stables at Lövsta. There will primarily manure from stables that rot to biogas. The biogas plant will also have the capacity that rot others substrates that can arise in the farm operation. The aim with the biogas plant is to produce non fossil electrical and gas heat for own customs, to reduce smell impact from stables and to make possible different types of research investments within the area.This study has implemented multiple cases study of different investment scenarios.

This examination work is performed at the institution of industrial economy and production at Jonkoping technical university, for JELD-WEN Door Solutions plant in Forserum.Today the focus in the company is on to reduce their inventories binding of capitals as well as inventory of products and that includes to get a good control of the supply and handling of material which is of great importance.JELD-WEN Door Solutions is one of the worlds leading producers of windows and doors and the head-office is located in Oregon, USA.A great number of wooden doors are manufactured by the company in varying of constructions, classifications and performance.The production of the plant in Forserum has a project- and customer focus manufacturing where only internal doors are produced. The overall market they are concentrated on is to different institution such as schools, hospitals etc.The purpose of this work is to investigate possibilities to improvement of material- and production control at JELD-WEN. The report will handle the master production schedule to and from the production divisions within manufacturing industry. Focus will be on the way for information- and material flows from arrival, transport within the company and further on to customers.Further a map of the flow was performed which gave a clearer picture of the connection between the flow of information- and material for the manufacturing process. On the basis of the mapping of the flow, the group discovered that the flow of material had some improvement potential.

The background of this work is the media discussion about the effect of cultivation on peatsoils on greenhouse gas emissions. It has been argued that row sown and intensivelycultivated crops such as carrots are more likely to emit carbon dioxide than for example grassleys. The association KRAV (an association promoting organic farming) shall, from this yearadapt their environmental policy to be more climate smart and have asked the question if thecultivation of some crops is more climate smart than others? Carbon dioxide emissions fromsoil are due to degradation of organic material and the rate is controlled by microbial activity.The microbial activity is determined by a variety of factors such as temperature, soil organicmatter quality and water content. I have measured the carbon dioxide emission from fourdifferent crops at two different farms.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

När Scanias maskiner som ska testa nya lastbilskomponenter eller hela lastbilar, så kallade testriggar, inte fungerar som de ska så fanns det i dagsläget en uppfattning att problemen i vissa fall dels var återkommande och dels var svåranalyserade. På grund av detta ville Scania Tekniskt Centrum (STC) införa rotorsaksanalyser av när testriggar inte fungerade som de skulle. Denna studie har undersökt vad som i dagsläget behövde förändras och vad som möjliggjorde att rotorsaksanalyser av fallerande hos testriggarna skulle fungera så bra som möjligt.En nulägesanalys gjordes. Resultaten av denna visade på att fyra roller fanns som var involverade i att åtgärda fel hos testriggarna, nämligen de som äger riggarna, de som arbetar med underhåll av riggarna, de som utvecklar riggarna och de som är ansvariga för arbetsmiljön och säkerheten hos riggarna. En process map skapades för att visa hur dessa roller i dagsläget samverkade för att bygga testriggar och åtgärda fel hos dem.Resultaten av nulägesanalysen visade på att fyra övergripande faktorer påverkade huruvida rotorsaksanalyser skulle kunna genomföras.

This Master's thesis aims to investigate the reference interview using the discourse analytical method discourse psychology. The reference interview has been studied thoroughly, and its importance has been proven repeatedly within the field of Library and Information Science (LIS). However, it has never been studied from a discourse analytical point of view before.The material for our study was gathered at Malmö public library, and consists of 10 tape-recorded and then transcribed reference interviews. Our study shows that there are several discourses within the reference situation. The dominating discourse, the reference interview discourse, is found within all the reference interviews.

The aim of this master?s thesis is to investigate a information center called ?Infoteket om funktionshinder?. The purpose of Infoteket is to collect information about disabilities and make it accessible to people with disabilities, their relatives and public. In this survey I will analyze how Infoteket can help people with disabilities to achieve empowerment. I use empowerment as a theoretical framework as Jay A.

The essay depicts the opposite views of the director and an actor during the filming of a specific scene in a feature film. The actor feels that he is not being listened to. This leads to unforeseen consequences for the director, as the actor no longer wishes to take part in the marketing of the film prior to its opening night. Everything is seen from the director?s point of view, she is working in a film world dominated by men.Questions are being asked if the director?s instructions are clear enough or if the actor, fearing getting lost, is mixing up his own feelings with those of the character he is portraying? What happens to the collaboration and how does it affect the rest of the team and the completion of the production? The director is also the producer.

The purpose of this study has been to examine how customers, by interacting with each other, can communicate and create the image of a brand. We find this topic to be relevant since there are no previous studies conducted concerning the customers influence on the brand image. Our ambition has been to describe in what ways and to what extent the customer can affect and influence the brand image by communicating with other customers. To fulfill our purposed we have targeted three important questions which are:? In which ways can the customer affect the communicated image of a brand?? To what extent can the customer influence the brand image and the perceived value?? Who has control over the brand, the customer or the company?For this study we have used a qualitative approach in which we have conducted eight personal interviews with brand consultants and the editor of the magazine Dagens Media which has given us the foundation for our analysis.

This thesis project has focused on studying ÅF?s business concept Energy Collaboration, which is their way of selling energy efficiency services. Thereforeongoing projects have been analyzed. The purpose was to determine achieved energy efficiency, costs and profitability for the studied projects. It was concluded that the Energy Collaboration is a good way of selling energy efficiency services, since the customer takes no risk and energy savings of about 15-25 % can be achieved with simple measures.