Today the human being see energy as a matter of course but the resources that is used for extract energy is today not enough for the world demand. Of all the energy that is used in Sweden today approximately 40 % goes to the building stock. This number will most likely increase if not necessary actions will be made on the already existing building stock since new houses constantly are built which will be added up on the already existing energy supply. This takes cause of action on the already existing building stocks, to fulfill the demands of the future use of energy that has been set by the authority. At the same time the thermal conditions cannot be influenced by the necessary changes that must be made.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde, first semester 2007. The assigner was Tibrokök in Tibro, Sweden. The commission was originally to design a sliding door concept for kitchen. Later it was expanded to also include bathrooms.During the feasibility study of the project Internet was used as an information source. Kitchen brochures and magazines were ordered from different companies to give inspiration and ideas.

The purpose of this project is to study Partab's material distribution process, furthermore identify critical problem areas within the company. Further the aim is to provide suggestions to new work procedures regarding material distribution and related processes. Appropriate literature has been used as a support in this process. The main goal of a commercial company is to generate cash flow, and maximize the return on investment. Streamlining material supply and the use of material is a part of this process. Virum and Persson define logistics as: "Logistics is the approach and principles founding the process of planning, development, coordination, organisation, management, and control of material distribution from supplier to user".

The intention of this final thesis is to examine how to create a schoolyard that inspires children at the age of 6 ? 12 years to play and give them possibility to develop. To get a lot of knowledge in this subject, I have combined studies of literature with practical studies at Hosjöskolan in Falun. During my practical studies I have done interviews, walks in the area with the children and visited other schoolyards. I have based a design proposal for the schoolyard of Hosjöskolan on these studies.

The aim of this study was to investigate and compare the availability of construction materials affect children's constructions and play. Observations were made when the children were allowed to play and build with very little and much of the material play-doh dough in preschool. The study is aimed at children aged 3 ? 5 years. Interviews were also conducted with educators in departments where the children spent time to give support to this study.The result shows that the children create as many designs of any material amount.

BakgrundOperationspersonal är den yrkesgrupp inom vården som är mest utsatt för risk för blodsmitta genom frekvent hantering av stickande och skärande instrument samt exponering av blod. Bland operations­sjuksköterskor finns en stark önskan att arbeta så säkert som möjligt för att minska risken för smittöverföring. Det finns föreskrifter, metoder och hjälpmedel för att förhindra stick- och skärskador men få skriftliga riktlinjer och rutiner.SyfteSyftet med den här studien är att undersöka operationssjuksköterskans hantering av stickande och skärande instrument i operationssalen.MetodStudiens design är en empirisk tvärsnittsstudie med en kvantitativ ansats. En strukturerad observationsstudie utfördes på Södersjukhuset i Stockholm. 18 operationssjuksköterskor observerades under 50 operationer.ResultatStudiens resultat visar på brister inom samtliga områden som observerats.

Mitt examensarbete är en undersökning i att ta tillvara på restmaterial ifrån möbler. Vad kan det medföra i form av estetik och värde? Vad finns det för bra metoder för att ta tillvara på material? Målet är att finna en metod för att förädla ett använt material till något nytt..

Detta arbete har syftat till att undersöka möjligheterna till förbättring av material- och produktionsstyrning vid Sandvik Mining and Construction i Sandviken. Målet har varit att skapa ett underlag för förbättrad styrning av ingående material. Nulägesanalysen visade att förbättringspotential fanns inom klassificeringen av hårdmetallämnen och komponenter. Dessutom var det önskvärt att ett kanbansystem uppfördes på de förslipade hårdmetallstiften som går till den helautomatiska STAMA-cellen. Examensarbetet har gett underlag för en omstrukturering av denna klassificering men även för en framtida uppdatering av den.

BAKGRUND: I vår bakgrund redogör vi för den tidigare forskning som bedrivits kring fysiskt undervisningsmaterial i ämnet. Vår teoretiska ram utgörs av Cummins modell för andraspråksinlärning samt Vygotskijs sociokulturella förhållningssätt vilka båda ligger till grund för vår resultatdiskussion.SYFTE: Syftet med vår undersökning är att med utgångspunkt i klassrummets konkreta material studera undervisningssituationer i ämnet svenska som andraspråk, samt undersöka vilka motiv lärare anger för sina val av material och val av aktiviteter.METOD: För att nå studiens syfte använde vi oss utav observationer och kvalitativa intervjuer. I vår undersökning ingår tre lärare på olika skolor som undervisar i ämnet svenska som andraspråk.RESULTAT: I vår undersökning fann vi att lärarna arbetade med ett varierat material och olika aktiviteter i sin undervisning utan att vara styrda av läroboken. Gemensamt för de tre lärarna var att de arbetade med skönlitteratur, läsförståelse och ordkunskap. Resultatet visade också att lärarnas motiv till det material de använde ofta grundade sig på en ambition av anpassning till elevernas tidigare kunskaper och vardagliga liv..

Atlas Copco Tools is a world leading company in tool manufacturing. The productionin Tierp works hard to improve their assembly to maintain its position. This thesis isa part of their improvement efforts to be a more Lean production.The main focus for this thesis was to identify the material flow in the kanban system,which used to supply the assembly groups, focusing on the material flow to assemblygroup 9 and the assembly group 3. Group 3's material flow within the kanban systemwas perceived to perform better than the group 9. The handling of kanban materialand their working methods in the two groups was identify those differences whichaffected the kanban system.As an alternative material supply a study were done in kiting.

This thesis examines the conditions for participation in the decision making process of a possible mine establishment in Storuman municipality in the north of Sweden. This is done through a case study where the main actors are the mining company Nickel Mountain AB, the municipality Storuman and the Sami village Vapsten. As a theoretical framework Cecilia Eriksson?s division of democratic theories is used as a starting point. Methods as described in deliberative democratic theory, such as discussion by effected community members, are seen as a method within the participatory democratic tradition, not a theory of its own.

An investigation of the heat impact of laser cutting on the material properties when producing tensile and impact test specimens of different steel types of varying thickness has been performed. The purpose of the thesis project was to provide recommendations regarding how much material that needs to be milled from the laser cut edge before tensile and impact tests. The study has been performed partly by investigating the test specimens by heat camera when the specimens were cut in the laser cutting line and partly by performing hardness tests, investigation by microscopy, and tolerance and roughness measurements and tensile tests of the laser cut material and material produced in the traditional multi operation machine. The results show that the heat affected zone in the thicker materials is greater than previously thought of, and that the currently used recommendation has to be adjusted. The study clearly shows that the thicker the material, the greater the heat affected zone, independently of the steel type, since the thicker material takes longer time to cut.

The purpose of this study was to examine how the design of the wards, at Björnkulla nursing home, affects the residents? wayfinding ability and autonomy. Thus, the aim has been to make a design proposal that, trough color and design can increase the residents? chance to independent mobility. Since the study aimed to examine how the environment affect and can support people with dementia, qualitative methods were used.

This report contains results of our study at CTC in Ljungby. CTC produces heating products such as boilers, heat pumps and additional products to their heating systems.The purpose of the report is to make a proposal how CTC will supply their new production line for heat pumps with materials. The proposal includes a production layout and a scheme for how to place the material in the production storage.The new production line will produce two different products and both of them have several variants. The line will also have a mixed flow, so the products can be produced in a random order. These conditions demand that the production line has great flexibility and that the material to all the variants can be stored in the production storage.With these conditions as input we made a layout proposal to the company.

Då jag varit ute på praktik har jag sett att elever allt för ofta bara sitter och räknar i läroboken. Vi matematiklärare måste bli bättre på att variera och börja laborera i vår undervisning. Både för att få med eleverna kunskapsmässigt i undervisningen och för att få dem intresserade och engagerade. Jag har därför i mitt examensarbete undersökt om lärare i år 4-6 använder sig utav konkret material i sin matematikundervisning. Mina problemformuleringar var:- Vad använder lärare i år 4-6 för konkreta material i sin matematikundervisning?- Hur gör lärare i år 4-6 för att konkretisera matematikundervisningen?- Varför väljer de som konkretiserar matematikundervisningen att konkretisera?Metoder som jag använt i min undersökning är litteraturstudier och intervjuer.