The purpose of the present study was to examine effects of driver, vehicle, and environment characteristics on Collision Warning System (CWS) design. One hypothesis was made that the capability of collision avoidance would not be same among a driver, vehicle, and environment group with different characteristics. Accident analysis and quantitative analysis was used to examine this hypothesis in terms of ?risk? and ?safety margin? respectively. Rear-end collision had a stronger focus in the present study.

This Masters thesis work describes a comparison between two different methods for estimation of the down channel (base station to mobile subscriber) in Wide-band Code Division Multiple Access (WCDMA). The first estimation method, Optimal Feed-forward Channel Estimation (OFCE), is a conventional method that bases the estimates on data that is known to both sender and receiver, so called pilots. The second method, Decision Directed Channel Estimation (DDCE), is an elaboration of OFCE. It also uses user data for estimation. Simulations show that DDCE, in comparison to OFCE, does not attain an improvement in signal-to-noise-ratio (SNR) for high bit error rates (BER).

The aim of this present study was to determine and evaluate whether the presence of brooktrout (Salvelinus fontinalis) and sediment load may be a threat against the reproduction anddistribution of freshwater pearl mussel (Margaritifera margaritifera) in a creek located innorthern Sweden. Freshwater pearl mussel is an endangered species and is dependent ofbrown trout (Salmo trutta) to reproduce. Therefore there are concerns of indirect effects onthe population of pearl mussel by competition between brown trout and brook trout. Ditchesfrom a nearby gravel road have been fixed to lower the sediment load into the creek. I tried toevaluate this action plan.

The purose of the study is to increase knowledge regarding systematic enviromentarl work in an organization that works with road services. Work on the road is done in a hazardous environment with constant danger regarding the life of the individual. The site of the work varies in accordance with where the needs ae . This requires skilled workers capable of working independently and that they are experienced din doing their own risk assessments in accordance with the individual believes that the situation calls for work to be performed safely. The study was conducted with a qualitative research approach in which four employees of different positions, knowledge, experience and vision to work in a hazardous environment were interviewed. The focus rests on the organization, management, and individual aspirations for a safe and secure working environment. The study adds weight to the relationship between the purchaser of the work and the organization as a prime contractor due to the compexity of the organization.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

The purpose of this report is to investigate and compare the difference between stand-thinning machines and strip-road thinning machines, and how they affect the stand on behalf of future growth, theoretical economic result, wind impact, snow pressure and density of stand. The investigation is regarding the first commercial thinning of pine stands, after pre-commercial thinning that was well conducted. The investigation area was located near Katrineholm, Sweden. The measurements that were measured were strength of thinning and amounts of wind throws, snow-breaks and hauling damages. The results that emerged, was that thinning with strip-road machines had a significantly higher strength of thinning over all, as compared with the stand- thinning machines (45 percent versus 30 percent). Comparisons between wind-throws, snow-breaks and hauling damages of the stand could not establish any significant differences between the two methods that were investigated. Conclusions, over all, were that if forest owners want to have more timber volume left for second thinning and final cut of the stand, the forest owners should choose the method with stand-thinning machines. From the point of view of gentle treatment of the stand and ground damages the choice should be the same. However, the method with strip-road thinning machines is the most common and accessible method in Sweden. Most likely it is the most economical way to manage the stand for forest owners in present time. If the method with stand-thinning machines is becoming more common in Sweden, it is suggested for forest owners to consider the stand-thinning method as a candidate for treatment due to economic aspects..

In the government's bill on infrastructure for 2010-2021, the government presents that road investments should be prioritized before investments in the railway. The grants for operation and maintenance of the railways are much higher then in the last government's bill. Furthermore the current founding of investment in railways is higher then for road investment which is in opposite of the bill on infrastructure's directives. Therefore the purpose with my thesis is to find which factors that can explain how come the government has chosen to take these actions. As a model to help me achieve my purpose I have been using a modified version of the DBO-theory, where the basic factors to explain an action is Desire, Belief and Opportunities.

The purpose of this thesis was to increase the understanding and discuss safety aspects in two stairwells on Nyforsgatan in Eskilstuna, where the buildings were built during the years 1965-1975. I have presented a proposal for improvement through lighting. I have through different methods, such as surveys, interviews, literature studies and observations, come to a conclusion: that there are opportunities for improvement through better lighting that allows orientation in space and creates a nice atmosphere which will remove the feeling of not being safe, e.g. dark corners and shadows. It has been an exciting process to gather enough of facts to rely on and to develop the lighting design for the environments.

Abstract The Act of Education outlines that good quality in schools and preschools, focusing on continuous improvement, promote children?s learning and this in turn is on of the most important factors for child and youth welfare.This thesis was based on the authors´ pre-understanding that there are opportunities to improvement in the quality of preschools. The focus was on studying how analyses can provide a base for quality work, and the purpose of this study was to identify and describe the analytical methods that can be used in the process of continual improvement for quality development in preschools.A qualitative study was conducted in two preschools that have received quality awards. It was conducted through interviews with the preschool principals and through studies of various documents.In the comparative analysis of theory and empirical data, it was made clear that there was a regular analysing process going on at the investigated preschools and an emphasize of reflection could also be identified. Keywords: Quality development, preschool, analytical methods, processes, reflection .

The purpose of this study was to evaluate if verbal encouragement had any influence on handstrength measurements. Twenty subjects participated in the study, all women between the age of 20 and 62 years. A standardisation of testing conditions and verbal encouragement were designed. Three measurements were conducted during two days using T.K.K 5401 Grip D. First there was a trial set, and then Test 1 (without verbal encouragement) and Test 2 (with verbal encouragement) were conducted.

This Masters thesis is a study of the truck-driver profession and their use of libraries located in gas-stations and restaurants along the highways in Sweden. The reason for this interest is the positive trend that has occurred concerning men without any university education and their reading-habits, that is due to their increased interest in listening to audio books. This challenges the general opinion that this group is not particularly interested in reading literature. Questions posed in this study are: How do the truck-drivers relate to the activity of reading literature, what part does the road-libraries play, and how can the services that the road-libraries offer be improved according to the truck-drivers. The method used in the study is interviews made by telephone.

The purpose of this thesis is to show how a good approach can be designed, focusing on the southern approach to the Swedish town Vilhelmina. Prior to the car being part of everyday life, the approach was a road where the town showed itself from the very best side. When the amount of traffic increased, so did noise and other disturbances, and as a consequence industrial areas replaced the residential buildnings at the approaches. Today, the pendulum is turning back and in recent years the approach is regarded as a place to introduce the town. The approach is also the place where cars should slow down from the speed of the main road to the speed of the city.

Cities have always been founded on nodes of different roads.The city Harnosand was founded where the road along the coast of north Sweden meets the sea and the calm bay of Nattviken behind the island of Harnon. Harnosand has a big historic heritage as one of the first cities in the north part of Sweden, centre of the church and education city. The incrising centralisation of Sweden and the globalication of the world have made north of Sweden to the backside of Sweden.The coun- tryside and the smaller cities don ?t live anymore. In Harnosand is big moving out and many empty spaces. In the middle of Harnosand next to Nattviken, is one of these empty spaces. This empty space next to the road of E4, that leads out in the world and Europa.

AbstractThis work was assigned by a technological company that manufactures gas detectors in which the sensor signal is processed using digital filters. These filters have been developed by a consultancy firm which converted previously used analog filters to digital filters. The purpose of this work has been to analyse inadequate, and sometimes erroneous, documentation from the project in order to provide the company with know-how and tools for further improvement of their products. The work has been done using the simulation software COMSOL which was bought solely for the project. Analysis showed serious flaws as well as pure errors in the consultant?s documentation.

The aim of this study is to examine possibilities and barriers for an introduction of electric vehicles in Sweden. The study has an interdisciplinary approach and thoroughly examines the essential topics which influence the future of the electric vehicle. The study reaches from answering the question on why electric vehicles lost the game to petrol cars in the early 20th century, to sketch how the difference in total cost of ownership will be between electric vehicles and petrol cars for the coming 20 years. Apart from these subjects the main topics of the study are today?s and tomorrow?s situation regarding technology, charging, fuel, market and economic incentives from an electric vehicle perspective.