Title:?Speed cameras - an prevention of crime and a standard forming instrument of control??Authors: Markus HanssonTutors: Bo Isenberg & Carl HultExaminator: Ulf DruggeThe School of Human SciencesUniversity of KalmarThe studys purpose is to get a absorbed understanding for peoples attitude, and effect of speed cameras. The disposition for the study is to integrate earlier studies in the matter, combined with elevating interesting sociological conceptions. As an attempt to understand speed cameras as an instrument of force on the individual have Michel Foucaults concept Panopticon been used to see its effect, and it?s look upon how crime prevention will be formulated, which can give an explanation of why speed cameras are being used as an instrument of control on the traffic area.

The aim of this inquiry was to investigate the most appropriate measures to reduce noise impacts from road traffic on the Nydala recreational area in Umeå municipality due to the planned re-routing of the E4 motorway to an existing road along this area. The sound environment is an important part in the experience when we are visiting recreational areas. Noise is not only disturbing; the liberty from unwanted sounds also allows us to perceive natural sounds that are a benefit for the cultural experience. Therefore it is important to take actions to protect this well used area from traffic noise. The reasonable options to avoid noise impact in this case are to lower the speed limit, using a noise reducing coating or use noise protection screens and walls.

The different material layers as part of a road construction fill all a function so theroad becomes durable, safe, comfortable and aesthetically pleasing. Recently, anew group of construction materials started to play an important role in roadconstruction ? geosynthetics.This thesis addresses the two most common types ofgeosynthetics used in modern road construction, namely geogrids and geotextiles.The most common use of geogrids is reinforcement of poor subgrade by usinggeogrid soil reinforcement, which occurs when road material particles wedge inthe geogrid?s mesh. Geotextiles act partly as a barrier that prevents the finermaterial in the below ground from being mixed with coarser upper material andalso act as a load spreader.Road contractors often face a choice of whether geogrids and/or geotextiles areappropriate in a particular road project and also how much profit the choice mightbring. This phase in the tender calculation process is the intended scope of thisthesis.The thesis deals with both the "hard" cost-function aspects and the "softer" values e.g.

The Swedish government has set up the overall goal that no net emissions of greenhouse gases can occur after 2050. A sub-target has been developed for road transports which states that the use of fossil fuels must be reduced with 80% to 2030 in order to be completely abolished to 2050. A public inquiry mapping how this can be achieved was handed in to the government late in 2013. The use of alternative fuels for road transport, both biofuels and electricity, is expected to give the biggest contribution to the reduction of the use of fossil fuels. The inquiry sets up a number of goals for how much the use of alternative fuels must increase to 2030 in order to reach the overall goal and which instruments that are needed in order to do so.The aim of this thesis is to evaluate how these goals can be reached and what the most likely obstacles that may hinder the reaching of these goals may be.

Workplace accidents in Sweden have in recent years increased. Companies are at the same time putting a greater emphasis on preventing accidents and inform about safety and risks. Therefore there is a need to know how to visualize this safety information. This study is based on a part of a project proposed by the industrial company AB Wahlquists Verkstäder, in which they want to visualize their safety information for new employees and existing staff, and also for temporary contractors and apprentices. The purpose of this study is to see what is required of the visualization of safety information and what guidelines that should be followed.

Heavy duty vehicles often have problems with traction during the winter periods. For vehicles that can lift tag axles it is possible to increase the normal force on the driven axle by lifting one or more tag axles, this will then increase the propulsive force of friction. This however increases wear on both road and vehicle. A possibility to reduce the wear while achieving nearly equivalent traction compared to lifted tag axles is to allow the vehicle to regulate the normal force by lowering the pressure in the air suspension associated with the tag axles or by the lifting of these axles. The vehicle would then by itself be able to set just the right amount of normal force on the drive wheels to avoid unnecessarily high normal forces while maintaining sufficient traction.The purpose of the report is to find out which parameters affect heavy duty vehicles when driving on slippery slopes and how traction can be improved.

De senaste årens långa och kalla vintrar har lett till ett ökat antal halkolyckor. Genom att undersöka halkolyckors utsträckning samt halkskydd som fanns tillgängliga konstaterades det att ett behov av nya halkskydd fanns. Enkäter för att ge svar på användning av halkskydd togs fram och svar från personer i åldrarna 20-65 visade att man överlag inte använde halkskydd. I stor utsträckning berodde det på halkskyddens dåliga kvalité och den negativa stämpeln som fanns på dem . Textila material undersöktes för att finna lämpliga egenskaper.

A product and design development of a household device which shall dry food waste has beencarried out in collaboration with Smedlund Miljösystem AB.This project has been implemented through several brainstorms and a questionnaire study.A great insight of how it is to work in a project in real work life has this project been givenme. This is a slightly less straight road to a conclusion than in the academic world that I amused to..

This report is about Swedish statistics on work related accidents and work related diseases onboard Swedish ships. The authors analyzed collected statistics from two authorities and an insurance organization in an attempt to compare the data. In order to understand the need for statistics and why the authority publishes them; minor literature study was conducted. The results of the literature study are in the background chapter. The requirements for the different cases to be registered in the statistics have been investigated, in unity with the issue in question.

Detta är vårt C-arbete där vi valde att göra ett sällskapsspel av vår frågeställning. Spelet går ut på att producera en film, den spelare som producerar den bästa filmen vinner Oscar för bästa film och även spelet. När man spelar spelet så lär man sig hur en filmproduktion går till och vilka komponenter som är extra viktiga när det gäller bedömningen för vinnaren av Oscarstatyetten för bästa film..

The purpose of this essay is to see if villages or bigger settlement locations can be found in south-eastern Blekinge during the viking age. There have been many archaeological findings from this period in Blekinge, for example grave findings, ring-forts , old roads and ancient harbors. But no evidence of a village has been found yet. If south-eastern Blekinge is compared with the area surrounding Järrestad on Österlen in south-eastern Skåne and the area surrounding Sorte Muld on Bornholm, many likenesses can be seen. In this essay, the findings in Blekinge will be used as different components when the three areas are compared with each other.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

The project aimed to develop a protective and stabilizing insole called Trailplate for soft andlight shoes. The demand came primarily from off-road runners in France, Switzerland, andAustria. The project was carried out at Icebug, a company that develops shoes mainly forrough terrain. The main focus has been on the trailplate which is designed to fit severaldifferent shoes.Torsional stiffness and bending resistance were the main objectives. To improve the existinginsole, a material with the right features was required.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.