The result from Requirements Engineering is a Requirements specification. Characteristics of a good Requirements specification are unambiguity, completeness, verifiability, consistency, modifiability, traceability, correctness and ranked for importance and/or stability.This work defines these quality attributes and answers the questions how to reach these attributes and the diffuculties which exist in this area.This work should be read to get an overwiew of the area Requirements Engineering and Requirements specification..

This report describes the work of developing a specification of requirements for Waste Heat Recovery Units. The main part of the paper describes how the work with the specification of requirements has been performed. One specific question to be answered is:What are the customer?s demands in case of properties for the Waste Heat Recovery Units and how is that information collected as an order documentation to suit the business area Oil & Gas?The report begins with a description of the assignment and continues with the aim and background. A theoretical part describes the different areas and methods that have been important during the process.

Modern IT systems tend to become more and more complex, while the number of active systems in companies increases. Furthermore, the number of security-related incidents is at an all-time high. These new conditions impose new demands on organizations. For example, it is no longer possible to manually collect and examine the systems log messages.The purpose of this thesis has been to make a comprehensive study of solutions for automated collecting and managing of log messages, analyze the Swedish Armed Forces specification for solutions for central log collection and management, and evaluating exis- ting solutions. The work consisted primarily of literature studies and evaluations of two of the Swedish Armed Forces of selected products: NetIQ Security Manager and Splunk.

The thesis was performed at the lighting company Zpecta AB. Zpecta needed to develop alternative attachment of their LED-luminaire Capella. Today Capella attaches in metal ceilings with four magnets. Zpecta got indications from their customers that there was a need for other attachments. The purpose is to determine the customer?s requirements and the interfaces that are considered for Capella.During the thesis, Capella was only on the market for testing and evaluation.The thesis was initiated to create a specification.

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

This thesis presents the design and implementation of an accounting and status notification system for the LPRng print spooler. A solution using SNMP to query for needed accounting and status data is presented, a design built upon this, and an implementation produced. As the system derives from the Requirements specification, it will make no attempt to solve all printer accounting problems or to offer compatibility with all printers, database management systems or print spoolers. However, several solutions for printer accounting are discussed and the best solution derived from the Requirements specification will be chosen..

During 2001-2002 a prototype, IMIS (Integrated Mobile Information System) was developed at BTH (Blekinge University of Technology) to demonstrate how mobile IT-systems can be used in healthcare. The prototype was based on the activity theory of Engeström. An ongoing project started in spring 2003. The purpose of the project is further development of IMIS with special focus in the diabetes healthcare. Participants in the project are scientists and students at BTH, ALMI Företagspartner, Blekinge FoU-enhet, Barndiabetesförbundet Blekinge, Blekinge Diabetesförening, Vårdcentralen Ronneby and Vårdcentralen Sölvesborg.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.

This thesis deals with the development of a specification regarding a push-button, which will be used to control the gear-shifting function in an automobile. In addition to this the author will describe different techniques and theories that have been helpful in achieving data and results for the specification.Kongsberg Automotive AB, is located in Mullsjö, Sweden, the company supplies parts to the automotive industry. In the research and development department, R&D, there is a group that works with development of Shift-By-Wire systems. In an automobile with a Shift-By-Wire system the communication between the gear-shifter and the gear-box occurs electronically. The mechanical link is, in most cases, taken away and replaced by the digital system.

Atlas Copco Tools develops and manufactures handheld industrial tools. Heat and surface treatments are used to provide the tools with certain properties. There are no routines for the choice of treatment or for how to specify treatment on drawings. Production documents that are sent for production abroad may not be clear enough. Some treatments are known as trademarks and there are no instructions for how to specify these on drawings and in CAD-models.The purpose of this master thesis work is to create recommendations for the procedure of choosing heat and surface treatment.

This thesis work was made to optimize the writing of the construction specificationsat FKA. These construction specifications are created before each plant modificationsthat is started because requirements from the Swedish radiation safety authority(SSM) and internally on Forsmarks nuclear group as constructions / implementationdocumentationThe study was done through seven interviews of two people at three different groupsinvolved in the construction specification and an interview from the group accreditedverification. The four selected groups were selected through an extensive analyticalwork resulted in an elimination matrix where these four groups was considered to bemost involved with the construction specification.The questions asked to these individuals were based on the instructions and sampletext that are described in the construction specification. To ensure the quality of thethesis were to limit itself to the chapters that were considered most relevant toimprove. The analysis revealed a number of points that should be improved, partlyinto the routines when writing the construction specification and when ether sampletext or suggestions should be changed and complemented.

This report covers the product development of a new type of extendable table for the company Karl Andersson och Söner. The company wants to expand their product collection with a new product. Karl Andersson och Söner is a well-known family company that has been located in Huskvarna since 1898, and they are producing furniture for private- and the public environment.The aim with this project is that the product should lead to increased sales, as well as expand their collection to appeal a wider audience. The work is permeated by two issues, to achieve as good results as possible. The issues will bring up how to make a table better, in terms of the competitor?s options, and how to apply a design process to develop a table that meets the markets needs and requirements.The design process of the work consists of strategically picked parts from three separate design processes.

Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

Real-time systems are required to answer to external stimuli within a specified time-period. For this to be possible, the systems behaviour must be predictable. The use of active databases in real-time systems introduces unpredictability in the system, e.g. due to their use of active rules. The behaviour in active databases is usually specified in ECA-rules.

This paper is a degree project on the C-level, 15 points at University West, Department of Business and IT dept. Informatics. This study is about agile methodology and its impact on IT projects. Requirements management is a process within an IT project, where customer has certain requirements that must be met by an IT system. The difference between the traditional and agile development is in the requirements management process and it can cause problems in a project.