Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

I Sverige genomförs varje år offentliga upphandlingar till ett värde av ca 500 miljarder kronor. Alla offentligt finansierade verksamheter måste följa lagen om offentlig upphandling och den formella upphandlingsprocess som lagen specificerar. Lagen är allmänt formulerad och anvisar en process där fokus ligger på förarbete och matematisk utvärdering.Cognitive Systems Engineering har vuxit fram utifrån insikten att effektiva processer kontinuerligt behöver använda såväl feedback och feedforward för att uppnå sina mål. Typiska tillämpningar är dynamiska, tätt kopplade processer där dessa behov är tydliga, men CSE som ramverk är generellt definierat och bör gälla även för en beslutsprocess på organisationsnivå. En CSE-analys har potential att förtydliga funktionella faktorer som tillåter upphandlare att genomföra effektiva och ändamålsenliga upphandlingar.I syftet att testa ovanstående hypotes genomfördes en fallstudie av Linköpings Universitets upphandling av företagshälsovård 2008.

This Master thesis has been carried out at Scania CV AB in Södertälje, in collaboration withKTH, The Royal Institute of Technology, Stockholm. The focus of this Master thesis isSetBased Concurrent Engineering(SBCE), with the purpose of answering the questions: what isSBCE, how does it work, and for what purposes is it applied.It was early established thatSBCE is often included as a part of Lean product development,which in its turn is often related to Toyota?s way of working. TheSBCE method includesworking with multiple solutions in parallel, eliminating weak alternatives throughout thewhole process. In opposite to a conventional product development process, where it iscommon one at an early stage tries to identify and choose the most promising alternative.Despite the appearance ofSBCE as a resource consuming method, figures from Toyotaindicates the opposite, thatSBCE is in fact a very effective way of working compared to othermore traditional methods.The process of this Master thesis was divided into three phases.

Detta examensarbete har utförts vid Duroc Engineering AB i Luleå. Duroc Engineering är Sveriges ledande företag inom laserförädling av metalliska ytor och levererar tjänster och produkter till framförallt gruv-, stål-, flyg- samt verkstadsindustrin. Rostervagnar transporterar kulor som används vid sintringen i Malmberget vid LKAB:s kulsinterverk. Genom att vagnarna passerar genom olika värmezoner sintras kulorna och vagnarna töms därefter för att hämta upp nya kulor. Detta pågår dygnet runt, året om, vilket medför stort slitage på vagnshjulen.

As the European Landscape Convention is brought into action, planning in Sweden has got to become increasingly considerate of the landscape and its character. To render this possible, a basic requirement is that we find a functional method for analysis. The Landscape is a synthesis of the interplay between place and man. It is made up of our physical environment and shows the result of our actions throughout history. Our surroundings affect us in many ways, financially as well as emotionally. This is why an analysis of the landscape has to be inclusive of many types of information. I have performed a landscape analysis, according to the British Landscape Character Assessment-method, in Svedala kommun.

Nano materials can today be found in a wide range of consumer products and the number of new products on the market is expected to inrease. In the shadow of hope for nano materilas potential in various applications, low awareness of its health and environmental risks is hiding. Furthermore, the knowledge about people´s risk perception of nano materials is limited. Parallel to the situation described above, the scholls meet the challenge of incrasing the scientific literacy. To achieve this goal, skills in argumentation in science studies has been emphasized and the concept of socio-scientific issues has been emerged.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Uppdraget som gavs av Brimer VA Produktion AB i Osby var att ?föra fram deras nya vattenledningssystem i ljuset?, göra en FEM-beräkning på en detalj i systemet och ta fram en ekonomisk samt teknisk jämförelse mot det traditionella vattenledningssystemet. Bästa lösningen på uppgiften var att visualisera vattenledningssystemet med hjälp av animerade filmer. Detta med tanke på att visualisering har ingått till stor del i utbildningen Virtuell Produktutveckling & Design..

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

This work has been done by three development engineers and one computer engineer and in some cooperation with the company Phoniro. This report is written for computer science and is mainly oriented on the programming part in the project. The goal has been to develop a program that ensures the quality of the care that the home care organization delivers. The program is developed for cellphones and is supposed to be used in every visit. Several functions have been developed for the reason of reducing mistakes in patient visits, where the focus was on safe medication.

Grunden för examensarbetet är den tävling om nytt stadsbibliotek i Stockholm som Stockholms stad utlyste 2006. Det nuvarande stadsbiblioteket från 1928, ritat av Erik Gunnar Asplund, är en av Sveriges mest kända byggnader. Uppgiften har varit att rita en tillbyggnad som kan bilda en helhet tillsammans med det nuvarande biblioteket. Det har handlat om att först värdera det som finns idag och sedan tillföra något för framtiden..

Denna rapport presenterar det examensarbete som gjorts i samarbete med företaget Artimplant. Syftet med arbetet är att ta fram en prototyp av ett meniskimplantat i trikåteknik. Det kräver stickning av en given form och att prototypen ska inneha vissa egenskaper.Ämnesområden som berörs under arbetets gång är textiltillverkning med inriktning mot väfttrikå samt medicinsk textil. Förutom textila ämnesområden tas även ämnen som knäledens anatomi och meniskens uppbyggnad, funktion och skador upp. Kunskaper inom dessa områden krävs för att på bästa sätt ta fram prototyper av meniskimplantat.Att sticka det triangulära tvärsnittet och den böjda formen som krävs för ett meniskimplantat har varit ett arbete som pågått under hela projektet.

The essays main intent is to examine whether there has been a proper implementation of the Council?s directive 1999/70/EG into Swedish law regarding the requirement for measures to prevent the abuse of successive fixed-term employment contracts. To achieve this purpose there is a need for an examination of current law. The essay also has some secondary purposes. One of these secondary purposes is the question of whether the implementation of the Council?s directive 1999/70/EG has lead to a reduction of the workers employment protection, which is closely connected to my main question and the violation case.

This degree project is on 15 university points which correspond to 10 weeks full time studies. The work has been carried out during autumn term 2007 and spring term 2008. This degree project has been carried out with the cooperation of Etac Supply Center AB who is located in Anderstorp.It?s been Etac interest to develop a solution which helps the user of the wheelchair over obstacles. My task has been to develop a concept that solves the problem according to the requirement specification.In the rapport the reader can follow the development from an idea to a finished concept.