I denna rapport redovisas arbetsgången för produktutvecklingen av ett rullstolsunderrede med nya design- och konstruktionslösningar. Det slutliga konceptet är ett underrede med två centrala konstruktionslösningar; en hydraulcylinder som medger vertikal sitthöjdsjustering, samt en vaggfunktion i sittplattan som medger ökad balans vid vinkeljustering. Samtliga funktioner på underredet har anpassats för att erbjuda ett enklare och renare ramverk..

The insurance industryis challengedby major changesthrough internationalizationand thusgrowingcompetitionwithmore optionsand greater availabilityfor customers.Solvency II, a new regulatoryframework and anew standard forinsurance companies,is therefore implemented in a steptowardsa more competitive Europeaninsurancemarket. Solvency II will result in extensive structural changes for many insurance companies. Newstandards andinternal models must also be implemented by the companies. Solvency IIhasa tightening effect on thesolvency capital requirements forinsurance companies. At the same time it also leads tomajor changesandincreased demandon risk management andinternal control, alongside with demands fordisclosure of informationto the market.

Detta examensarbete har utförts i samarbete med Löfqvist Engineering i Örebro. Uppgiften har varit att utföra en simulering av en stor automatiserad produktionslina som ska användas vid tillverkning av avgassystem till lastbilar. Utifrån denna simulering skall exakta cykeltider för produktionen bestämmas. Dessa tider kan sedan användas av Löfqvist Engineering för att verifiera tidigare uppskattade tider.Arbetet inkluderar en litteraturstudie om Lean Production och hur det fungerar ihop med automation. Det finns även med lite bakgrundsinformation om Just In Time, olika filformat och robotsimulering i allmänhet för att ge en bättre överblick av ämnet.Programmet som har valts för att utföra simuleringen är Tecnomatix Process Simulate och den inbyggda Line Simulation modulen.

Målet med projektet är att utveckla ett system där det skall gå att komma åt information från en intern databas på ett enkelt sätt med en mobil enhet. Eftersom varje enskild databas är unik så skall det gå att justera systemet enkelt genom ett administrationsgränssnitt så att det passar till varje databas. Informationen är oftast känslig och skall inte åtkommas av obehöriga användare, så den mobila enheten behöver autentiseras för att skydda informationen. Systemet kommer alltså bestå av ett par applikationer:1. Webbtjänst som skall kommunicera med databasen och skicka information till webb- och den tjocka klienten.2. Webbaserad klient, skall kunna visa data från databasen.3. Tjock klient, skall kunna visa samt uppdatera data från databasen.4. Administrationsgränssnitt som skall kunna konfigurera webbtjänsten. För autentisering av användaren används telefon ID:et och sköts automatiskt av den tjocka klienten.

Störnings indikation på lågspänningsnät. Detta examensarbete har kommit till som ett resultat av företaget Öresundskrafts arbete med att installera ny teknik för datatransmission över elnätet. Uppgiften var att indikera störningar mellan 5-95 kHz på 400 V nätet med hjälp av en applikation för förenklad insamling och loggning av mätvärden baserad på ett oscilloskop kopplat till en dator via GPIBprotokollet och programmet LabVIEW..

Aim Developmental Coordination Disorder Questionnaire 2007 (DCDQ'07) is an international survey tool based on parents' estimation of their child's motor coordination skills. The purpose of this study was to investigate the validity of a Swedish version of DCDQ'07 by finding out how the classification of Developmental Coordination Disorder (DCD) via DCDQ'07 is consistent with the classification of DCD via the motor impairment test, Movement ABC.MethodIn the context of a larger study, a Swedish translated version of the parent survey DCDQ'07 were sent to 4000 randomly selected families with children aged 8 - 10 years in Stockholm County. The classifications "DCD" or "NOT DCD" with cut-off values ??of 56 (9 years) and 57 (10 years) were applied. Forty families were selected from 410 registered responses.

Projektet bestod i att utveckla en anläggning för personsanering av biologiska-, kemiska- och nukleära stridsmedel, en så kallad NBCanläggning. Arbetet har initierats av Marinens Sjösäkerhetsskola i Karlskrona. Under arbetets gång har Fredy Olssons produktutvecklingsmodell tillämpats. Projektets tyngdpunkt har legat i att söka komponentalternativ för de önskade ändamålen och för att uppfylla kraven. Anläggningen är långt ifrån produktionsklar, men ett omfattande grundarbete har gjorts inför ytterligare bearbetning och komplettering med beräkningar samt vissa komponentval..

This report is a thesis for collegeengineering program in structuralengineering at Uppsala University andwas commissioned by the Swedishcontractor Svevia. The study aims toprovide an overview of the mostbeneficial bridge material from bothenvironmental and economic point ofview.The life-cycle analysis covers onlycarbon dioxide emissions, since it isthe most spoken of in today?s climateagenda. Furthermore, this study aims tohighlight which parts, of the systemboundary, that contributes to greatercarbon emissions for the wood- and theconcrete bridge.The life-cycle cost analysis wascalculated with a lifespan of 40 yearsand covers the basic cost of investment,operating and maintenance, anddecommissioning costs.The analyzed constructions in this studyare existing projects that are almostcompleted. Both bridges were designed tohandle loads up to 60 tons.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

This thesis gives suggestions as to how to design a wooden-based wave-power buoy. The thesiswas carried out at Uppsala University in collaboration with the Division of Electricity and AppliedMechanical Engineering. The product was conceived and developed taking into consideration anumber of requirements put forward by the supervisor, Magnus Rahm. The most importantdemands were that the material used should be able to withstand pressure from the sea withoutbeing damaged and that the production costs should be low.Department of Engineering Sciences, Division of Electricity at Uppsala University was visitedseveral times to discuss issues including the various ideas with the supervisor Magnus Rahm, andwith several people in the department.The work started by studying available literature in order to get background information aboutsuitable methods available for the project and to see how similar projects were carried out. Thereason for this was to get a better understanding of this particular problem and how to solve it.After consulting the supervisor, the group decided to construct four different buoys using fourdifferent materials.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The impact of computer programs in safety-critical systems has increased in the past decades and computer-based systems can now be found in a wide range of applications. A new approach for developing dependable systems is documenting all design rationale that affects safety using Intent Specifications. A recent approach for developing complex systems efficiently and in an upgradeable manner is Component-Based System Engineering. In this thesis, these approaches are combined in the development and upgrade of a Remote Robot Control Unit by using the tool SpecTRM. The case study showed that Intent Specifications and CBSE could successfully be combined.

Outsourcing means to contract out work previously done within the cooperation to a supplier.This is an increasing trend today. Traditionally companies have outsourced manufacturing butwith the growing specialization they tend to outsource other activities as well.China?s economical reforms and entrance into the World Trade Organization, WTO, hasenabled international business connections. Since China offers one of the cheapest labours inthe world, many companies have an interest in starting up an activity in the country. Themany foreign investments in China have lead to an economical growth which in turn hasmade it possible for China to invest in the Chinese competence and innovative capacity.The commissioner of this master thesis, SMS, is one of the leading actors in retrieval ofamong other things mounts and stands for flat screens and projectors.

This thesis is performed as a summarizing project for the mechanical engineering education at School of Engineering in Jönköping. All knowledge necessary to complete this thesis was gathered from previous courses and education.This project was to develop a new product for the company TR Equipment AB in Tranås. The new product is going to be based on an already existing product, TR 1700. TR 1700 is a bathtub equipped with a height adjustable function. This product is used in retirement homes and in the care of disabled people.

The purpose with this essay is to examine the role of landscape photography as a portrayer of nature. The study contains interviews with eight landscape photographers, to find out how they look at tendencies and changes in photography. The essay focuses on the discussion of authenticity and realism in landscape photography. Due to the requirement of nature as something natural and authentic, the landscape photography stands in a special position when it comes to matters of manipulation and influence. On the basis of certain analysis themes, the landscape photographers debate questions such as where landscape photography stands today, and how the future looks for the genre..