Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

AB Sandvik Cormorant?s production unit in Gimo has identified a need to examinethe handling of products between operations with the purpose of generatingproposals of improvement for the product handling.The aim of this project is to study the existing manufacturing process and givesuggestions for improvement. The proposals should reduce the manual handling ofproducts, decrease the risk of damaging the products during the manufacturing andform a basis for increased traceability. Based on a mapping of the manufacturingprocess and the problem description, a specification of requirements has beencomposed.The mapping of the manufacturing process suggests that a change of the currentsystem is required. The company is recommended to decide how the producthandling between operations should be performed as guidelines for the productionteam.

Introduction: A big part of the patients that recently has gone through operation at surgical units experiences pain in different scales after their operation. Untreated postoperative pain has been proved in different studies to increase to risk medical complications, longer rehabilitation, more days at the hospital and higher expenses for the hospital. One of the nurses? main tasks is to notice and relieve the pain of the patients. To engage the patients more in the medical process and make the nurses´ work more person-centered could make an impact on the postoperative pain and contribute to a better pain relief.

Background: In previous studies on the subject hope it has been revealed that hope is an important condition for the experience of health, quality of life and well-being. In the literature hope is described as a great support in life that is vital for a person's life and for how the person manages to become afflicted with a fatal disease. Within palliative care the 6S: s is a person-centered model for care that is directed towards the promotion of patient´s participation, relief from suffering and enablement of well-being and support of the patient and his or her family members. Aim: To describe how patients find hope in their situation in palliative care, and to examine whether there is an interaction between the different dimensions of 6 S: s model and with patients' experiences of hope. Methods: This degree project is literature study.

I denna uppsats beskrivs och implementeras tre alternativa metoder för att skatta kovariansen mellan finansiella tillgångar. De utvärderas sinsemellan och jämförs med stickprovskovariansen. Utvärderingsmodellen innebär simulering av en aktiv portföljförvaltare i en verklighetstrogen miljö. Då kovariansen mellan finansiella tillgångar beräknas med stickprovsskattning blir skattningsfelet stort. Detta fel, eller brus, försämrar portföljförvaltares resultat och alternativa metoder eftersöks.

AbstraktEn avgörande faktor för att kunna förebygga, avhjälpa eller lindra matematiksvårigheter är ifall pedagoger har kompetens att genomföra en kartläggning, som ger vägledning för fortsatta pedagogiska insatser (Lundberg & Sterner, 2009). Med detta som utgångspunkt var syftet med studien att undersöka yrkesverksamma specialpedagogers syn på kartläggning och yngre elevers räknesvårigheter samt hur de går till väga vid en pedagogisk kartläggning i matematik. Studien har en kvalitativ ansats med semistrukturerad intervju som metod. Deltagarna i undersökningen är två specialpedagoger med gedigen utbildning och erfarenhet inom området. Resultatet av undersökningen visar att informanterna har en formativ syn på kartläggning.

This report is the result of a thesis carried out during the spring of 2010 at Sandvik Coromant in Gimo. The purpose of this thesis has been to make an inventory and mapping of information used by flow groups that are most relevant for the day-to-day work. This mapping will then form the basis for information supplied by an automated system.The project consisted of:Identifying how the information is supplied today.Inquiring into the needs of an automated system.Which needs of information that will be provided by the system.Data collection occurred in two ways, both through observations and interviews. Observations of the participants were carried out early in the thesis, where the aim was to create a picture of the problem, and gradually develop a basis for the actual interview study. At each observation, an unstructured observation was used, which means that all activity was recorded.

Support group activities for children with mentally ill parent´s, without a parallel parent group, is by far the most common form in Sweden. The activities have primarily focused on increasing the frequency of the protective factors around children. Of course, parents and the families are also influenced of children´s participating in these activities. Most studies examining support group activities for children from the child's perspective. The experiences of parent?s perspective have not been well studied.

Value stream mapping is a tool that is frequently used by many different companies. It is a great tool used to achieve the work that follows the theories of lean production. The tool is used, however, only frequent on the factory floor and the method is also designed based on this type of use.An interest of applying the method on administrative parts of the company has occurred lately. Administrative parts of the company refers to the part that does all the planning such as purchasing, receiving orders, customer contact, contact with factory floor and other work that is made around the actual manufacturing. But the knowledge about applying value stream mapping on the planning part of the company is lacking because the method is relatively new.In this work, a comparison is made between the introduction of value stream analysis on production and planning.

This report is the result of a thesis at the company Sanmina in O?rnsko?ldsvik. The thesis is the final work at the mechanical engineering program at Umea? University.Sanmina has in 2015 launched an initiative to ensure that all sites are using LEAN principles and tools to enhance their business. As part of the plan for the LEAN-work, an LSS (Lean Six Sigma)-project has started to study the company's receivehall and inspection.

In a time when milk producing farm businesses face decline in profitability it is of great importance to examine how the situation can be improved. This thesis is a study off efficiency in milk producing farm businesses represented by Swedish, Dutch and German farms. The aim of this study is to investigate whether any differences exist between companies in these countries. Moreover, the study includes a mapping of a number of factors that determine how efficient milk production can be managed. This mapping is based on a literature review on prior efficiency studies followed by qualitative interviews with milk production advisors as well as a questionnaire sent out to dairy farmers in Sweden.

By studying a place or a phenomena research contributes to the creation of the image of the thing that he or she studies. Also, planning is seen as a democratic tool, a way to ?make? democracy. In order to see what democratic ideals that is being express it becomes important to study the research about democracy in Botkyrka. It is from this thinking this study about democracy and research has been formed.

 The sawmill industry is a relative fragmented industry that is in an economic upswing andwith a hard competition. The customers have high demands on their suppliers and the highcustomer demand make it necessary for the companies to make a streamlining in planningand production. For that reason it is very important that the planning- and productionprocesses aren?t to complex and with a simple structure.The purpose of this report is to study and map out a marked out part of a planning- andproduction process, from adjust works to final delivery, at a company in the sawmill industry.Different methods have been used for the report, among others interviews and subordinatedmaterial.We have mapped out a marked out part of the planning- and production process at theCompany. This part we have studied, and we have analysed the process it self and otherthings connected to the process.We see the planning- and production process in the Company as complex.