ABSTRACT System development has become more and more concentrated on development for the Web and this has resulted in larger target groups. It will most surely continue to be so considering that the Web will be the infrastructure of business and services in the future. A big target group involves that the owner of a system can earn a lot of money from the paying users, but that assumes that the system can meet user needs. If a system on the Web does not satisfy the user?s demands then they will use the competitor?s system instead because it is only a mouse-click away.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

This report reflects an examination work performed for Getrag All Wheel Drive AB during the spring of 2005. Among the companies range of products there exists some concern regarding the amount of clamping force and friction on bolted joints caused by the assembly torque.The aim of this project has been to determine if there is a simple way in which to identify and then practically apply testing methods for clamping force and friction through utilization of existing testing equipment.Three separate methods of clamping force and friction determination have been tested in rear drive unit, RDU, at a 30 Nm assembly torque. A fourth and final method, screw elongation with ultrasound, has been used as reference. The methods are:?Torque-Tension test.?Screw elongation with micrometer.?Joint stiffness test.?Screw elongation with ultra sound for reference.The results from tests can be viewed in table below.MethodTorque-TensionMicrometerCs=318 kN/mm Assembled with torque wrenchMicrometerCs=318 kN/mm Assembled on lineUltra-soundCS=311 kN/mm Ultra- soundCS=318 kN/mm Joint stiffnessTheoreticalClamping force-21,8 kN17,6 kN17,3 kN17,6 kN17,1 kN17,3 kNFriction-0,110,1470,1530,1470,1520,149.

In order to counteract and to discover unethical actions within an organisation, a growing number of Swedish companies implement a so-called whistleblowing system. The purpose of our essay is to study the mindset of companies and further analyse how this mindset affects the design and quality of companies' whistleblowing systems. To do this, we have used a qualitative approach by interviewing different Swedish companies about their mindsets and systems. The study determines that there seemingly are three different categories of systems of varying quality. In this study we have chosen to call them "internal system", "external system" and "combined system".

To implement an ERP-system is not an easy process. The success of the implementation depend on many different variables. The most important one is perhaps the requirement process, to define what the organization wants and expects from the system. In this study, the advantages of a process mapping are examined, in relation to the phase where the requirements are expressed in an ERP-implementation. The conclusion is that a process mapping generates an increased communication with the supplier of the ERP-system, hence the business knows their processes and thereby what they want from the system.

Can the Danish "Aftalesystemet", a system with the intention to simplify the use of services within health care, be used in Sweden? This project has investigated the possibility by installing and testing the system and explored its functions to detect any eventual problems. Analyses were made of the system's graphical part and the underlying code to see in greater detail how the communication between units occurred, since no actual documentation of it existed. Discussions with the developers took place regarding how the current system works and how further development should continue. In order to test the system, a completely virtual environment was used.

Sekretessbelagd.

The main purposes of this study were to 1) quantify bacterial production in winter during ice conditions, and 2) to compare these production measures with values measured from summer and open water conditions in three humic lakes situated in northern Sweden. Another purpose of this study was to 3) examine whether clear-cutting significantly affected bacterial production or water chemistry in two lakes situated in catchments were a large part of the forest had been removed through logging compared to an undisturbed reference lake. In winter (March/April 2014), the bacterial production ranged from 0, 7 - 2, 2 µgC/L/day and in the summer of 2013 the production values was 4 ? 10 times higher. The main reason for lower bacterial production in winter was ascribed to lower water temperatures as well as to older and more recalcitrant DOC, as there were no significant differences in total dissolved nitrogen or DOC concentration or -quality, that could explain a lower production compared to summer.

This report treats a Master Thesis performed at Scania CV AB. The task was to create a computer model of a hydraulic actuator system in the software AVL Hydsim. The system consists of two spring-loaded masses with surrounding hydraulic components. The purpose of the model is to study phenomenon and problems in the system, as well as to be a support in the development of the system. It is not supposed to be used to study absolute values in its current form.

Den här rapporten har som syfte att utreda vilket eldistributionssystem för offshoreenheter som sparar mest vikt och utrymme. De två elsystem som jämförs är GVAs standard system och Siemens Blue Drive System. Rapporten innehåller en teoretisk bakgrund för båda systemen och dimensionering av systemens kraftkablar samt beräkning av kabelvikter och komponentvikten för systemen. För att uppskatta kabel- rutter och längder kommer ritningsunderlag för GVAs offshoreenhet 7500 att användas.Resultatet visar att GVAs standard system är det eldistributionssystem som har den lägsta totalvikten med 168 ton, GVAs standard system har en vikt som är 101 ton lägre än Siemens Blue Drive System som har en vikt på är 269 ton. GVAs standard system har en lägre ström vilket gör att ledararean blir mindre och i med det blir kabelvikten mindre.

This qualitative study involves the implementation of Lean and Kaizen methods in a Swedish service industry. Lean philosophy is based on a method to achieve more with less. In practical terms this means that the use of an organization's resources is improved. The origin of Lean is the Toyota Production System. Now, Kaizen methods give managers and employees a better more efficient system to reach their goals within the organization or company.

The purpose of this master?s thesis is to study an electronic reference service from a user perspective. By qualitative interviews with eight students the thesis examines their information behaviour, why and when they use the service, the user?s experiences of the service and the communication with the librarian. The users have all used the Swedish electronic reference service Fråga biblioteket ? Forskningsbibliotek.

Internet has made information more easy to get, but also more difficult to retrieve. There is a need for information retrieval systems that assure accurate, reliable and up to date information. Quite a number of both commercial and non commercial search services has been developed on the Internet. We have made a qualitative study of one for-pay product in particular, NetS k, produced by BTJ (Bibliotekstj nst), Lund. It is a database that contains collected, evaluated and classified links, and is especially developed to suit public librarians in Sweden.

The purpose of this essay is to do an ecocritical reading of Vilhelm Moberg?s The Emi-grants from 1949. By asking and answering the three following questions; How does a system present itself, What are the different reasons for emigration; Why does differentsystem fit some well and some not.By using two articles from Green Planets - Ecology and Science Fiction to illus-trate two different views; Different parts value in an ekosystem and The Ship as an ecosystem. I have also created, based on the literary text four different terms concern-ing the dynamic system; Stable, Static, Unstable and Collapsing systems. I have found that all system goes through changes, some drastic, that changes the way the parts of the systems fit with in it.

The following study aims to investigate the environmental conditions of the harbor of Sk?rhamn, a small fishing community on the west coast of Sweden. The interest to do so rose as a newly built apartment residence failed to connect the sewage pipes of 18 apartments, causing the untreated sewage running into the sea. The parameters accounted for are the C/N ratio, total organic carbon (TOC) as well as total nitrogen present (TN) and ?13C in the top ten centimeters of a sediment core retrieved in the Sk?rhamn harbour.