To get rid of our dependence on fossil fuels we need to make use of renewable energy sources like wind power to a greater extent. Even though wind power is a renewable energy source it can still cause some problems for the close environment. One of the problems is shadow flickering. When the sun is low and the wind blows in a direction so that the rotor blades are positioned at right angles to the sunbeams and ?cut? the sunbeams off.

Abstract The IT- business is a fast growing business trade. This expansive line of business continuously demands flexibility both economically and legally. It is, today, of great importance to have knowledge about your own trade especially when it comes to new agreements. Laws and regulations are seldom flexible and adaptable tools, this is due to the fact it takes time to create new laws and, above all, it takes time to create laws with the right effect. This is where standard agreements enter the scene.

This study was carried out as a commission from Holmen Skog, district ?Egen skog? in Norrköping. During October 2006 several stands were inventoried by aerial photos from helicopter. The stands were those for which the next action proposed was plant inventory or plant check. The photos were interpreted and the number of stems was calculated.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

As break downs of production transformers are costly and often result in long outages it is essential for reliability of operation that the transformers are manufactured to be robust. The aim of this M.Sc. thesis is to investigate if deviations should be made from the standard IEC 60076 ? Power Transformers in order to describe a robust large power transformer for procurement.The investigation has been conducted in three stages. In the first stage a definition of the term robust was developed in consultation with the client Vattenfall Vattenkraft.

Our population are ageing. As this happens more people will be in need of long term care facilities. We now know that some elderly people with certain background factors are more likely to be injured or sick. One of the four biggest background factors is fall propensity. Most of the reported falls come from long term care facilities, approximately 60 % of the care takers in long term care facilities fall one time or more each year.

By exploring different forms of urban cultivation and looking into future gains of sustainability, I want to focus on unconventional and perhaps necessary ways of building, living and making a living. This will be made through study of literature on the topic.Urban cultivation could be anything from a pot of basil in the kitchen window to a city farm. The core of the concept is that the food is produced where it is eaten, in or in direct vicinity to the city and that it is produced ecologically. There will be many benefits, ecological, economical and social.The world is at a turning point right now where consumption patterns and the industry processed food are questioned and it is important that the things we consume are genuineand authentic. We want food that is locally and ecologically produced; food that we can trust.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

This study concerns unaccompanied refugee children and their experiences of living in Sweden and also their thoughts about identity and security. The aim of this study was to find a deeper understanding of these children?s situation. We formulated three research questions in order to obtain this deeper understanding:? What experiences do the informants have of living in Sweden?? What are the informants? views of their identity in their new life situation?? What is security to the informants?This is a qualitative study based on six semi-structured interviews with six youths whom have come to Sweden as unaccompanied refugee children.

En central del i ett systemutvecklingsprojekt är de tekniker som används för att strukturera organisationer och informationen i dessa. I flera årtionden har traditionella tekniker utvecklats. Exempel på tekniker som anses traditionella är ER-modellering och dataflödesdiagram. Idag används objektorienterade programspråk mer och mer för att implementera databaser. Det har dock inte funnits stöd för att analysera ett system objektorienterat förrän i början på 1990-talet.

Scania CV is one of the world's largest truck manufacturer. It is not only the directproduction of vehicles and methods that are important for Scania but also the servicemarket handling spare parts, repairs and workshops. The department Vehicle ServiceInformation construct standard times through work measurement for particularworks in the workshops. The software application STAM is used in the servicemarket to create and store standard times which then are exported to theworkshops' own systems.The purpose of this master thesis is to analyse and evaluate the internal workmeasurement system that includes standard times and the software STAM. Also,based on external analysis and benchmarking of other systems suggest appropriatefuture development within the area for Scania Vehicle Service Information.In order to perform the investigation, interviews and studies have been doneinternally at the departments that are involved in work measurement as well asexternally at Scania workshops.

The purpose of this study was to examine what previous research says about children?s experiences living in a low-income family. Its aim was to found out what children themselves say about their life living in a low-income family and what consequences, practical and emotional, low-income environment has on children. More specifically our aim was to find out how children themselves experienced their situation compared with their peer?s economical situation.

Background: Cancer is the most common cause of death among children in Sweden. The disease and the treatment cause suffering among the children, which also affects their parents. Research has shown that parents of children with cancer have poorer health. It is the nurse?s responsebility to help, not only the child, but also the parents in their difficult situation.

AbstractThis report has been developed in cooperation with Peab Region Bostad Göteborg, mentor at Krook& Tjäder (through Chalmers), and examiner at Chalmers University of Technology. The report is the result of a research of a building project, constructed by Peab. The report is investigating and it means to identify and evaluate qualities in the dwelling and its surroundings. Its purpose is to evaluate how the residents in a chosen housing cooperative enjoy living there. It shall, with help of chosen quality aspects, identify what expectations the residents had before moving in, how they experience the dwelling and its surroundings today, and what hopes they have for the future planning of the area.