Sök:

Sökresultat:

10148 Uppsatser om Real options analysis - Sida 36 av 677

RTK-teknikens användningsområden

Syftet med denna uppsats var att undersöka om RTK ? tekniken (Real Time Kinematik) i framtiden kan komma att användas vid lotsning i Sverige, ombord på fartyg med begränsat vattendjup under kölen.  Squateffekten påverkar fartyg vid passage över grunda partier i farleder och i kanaler. För att minska ner på squateffekten så kan man minska ned på farten eller ändra fartygets trim. Studien har utformats utefter en kvalitativ metod, som handlar om att man väljer att bearbeta och analysera sin information genom att verbala analysmetoder används. Detta har genomförts genom att intervjua ett antal utvalda lotsar som både är insatta samt mindre insatta i tekniken.

Energieffektivisering av skolbyggnad från 60-talet : Studie av Hållsta skola i Eskilstuna

In June 2006 the Swedish government decided that the use of energy in buildings should be reduced by 20 percent until 2020, compared to the level of energy used in 1995. To contribute to this goal, the real estate company ?Eskilstuna Kommunfastigheter AB?, set up own goals for their buildings. In 2009, the goal for schools was to have a maximum energy use of 118 kWh/m2year for heating and hot water.The school ?Hållsta skola?, just south of Eskilstuna, exceeds the limit since it used 270 kWh in 2008.

Inkarnationens hur Kristologi och eukaristi hos Kyrillos av Alexandria och Martin Luther

In this essay, I have examined and discussed the similarities and differences between christology in the thought of Cyril of Alexandria and Martin Luther, and further, to what extent Luther may have been influenced by Cyril in his doctrines of christology and Christ?s presence in the Eucharist. By reading texts written by Cyril as well as by Luther, I have tried to describe the position of each of the theologian?s. In the next step, I compared the thoughts of Cyril and Luther, and tried to show on both similarities and differences.

Jämförelse av olika reglersystem för undervisningsändamål

Examensarbetet syftar till att jämföra nya alternativ till olika system för användning i laborationer i reglerteknikkurser för olika studentkategorier. Det skall utredas vilket av ett antal alternativ till mjukvaruplattformar som är bäst lämpat att användas vid reglerteknikundervisningen i ITN:s reglerlaboratorium vid Linköpings universitet. Tidigare laborationer i berörda kurser skall även modifieras så att dessa kan genomföras i de nya systemen.Examensarbetet resulterade i en rad modifierade laborationer och system att tillämpa i dessa. De nya systemen medför att all reglering sköts direkt från en dator istället för tidigare variant med externa apparater som programmeras. På så sätt kan större fokus läggas på regleringen i sig och inte de system som tillämpas för att utföra den..

 Moderbolagsperspektiv kontra enhetsperspektiv  : - motiv och konsekvens i teori och praktik

Abstract The development towards an international accounting standard implies that Swedish groups of companies that are not quoted on the stock exchange can use a parent company perspective or an entity perspective while making their group accounting. The purpose of this study is to describe and explain the motives behind the groups of companies choice of perspective and to show how these motives agrees with the effect it has on the profit and loss account and on the balance sheet.The study includes four fictitious groups of companies based on real groups of companies. Every group of companies includes 1-3 subsidiary companies, where at least one is owned by the parent company with 51-70 %. Some assumptions were made before the consolidation.Relevant key numbers have been calculated according to both perspectives and then compared. A total of three semi structured interviews have been carried out two with representatives for the real groups of companies and one with a chartered accountant.

Chatt - ett nytt sätt att kommunicera med bibliotekarien

This thesis presents a new way of providing library users with reference services, namely chat (text based digital reference service in real time). Our research questions focus on the role of reference service, a comparison of chat reference to other reference forms, and the interest for real-time, digital reference. Our literature review covered the areas of digital reference and reference theory, the results of which showed that an ongoing debate hardly exists among Swedish librarians on the topic of reference work. We interviewed librarians from the three different Swedish chat reference projects existing at the time of our study. Most interviewees were very positive about chat reference.

Atopisk dermatit hos hund :

This student report is about canine atopic dermatitis It includes a description of the immunologic mechanisms and how the reaction affects the body. The symptoms are various, most common is pruritus, erythema and alopecia and directly associated with the immunologic reaction. The diagnostic process includes symptoms, physical findings, differential diagnosis, intradermal test and serological test. The options of treatment are several and vary for each patient. The report includes hyposensitization, medical treatment such as corticosteroids, antihistamin and cyclosporine, topical treatment, fatty acid supplements and environmental treatment. The prognosis is individual for each patient due to their different response to the treatment. It may take a while to find the right combination of treatments to achieve satisfactory control of the disease..

Analysis of eucalyptus plantations on the Iberian Peninsula

This thesis analyses the prerequisites, profitability and competitiveness of eucalyptus plantation on the Iberian Peninsula and in Brazil. The thesis has a macro perspective and analyses a typical hectare of eucalyptus in each studied region. A survey methodology was used as a strategy to cover a broad perspective using expert respondents. The regions studied on the Iberian Peninsula were the ones found suitable for eucalyptus plantations from an economic point of view. The studied regions were Huelva in the South West of Spain, Galicia in the North West of Spain and Portugal.

Utvärdering och implementering av automatiska farthållare i fordonssimulator

Vehicle simulators are becoming more common in vehicle industries. Company earns lot of money on simulations instead of real tests. Real tests are necessary but not made so extensively as before.In this thesis the building of an vehice simulator will be described and a comparison between three different cruise controls. The three cruise controls are PI-regulator, a regulator who regulates after positions in the terrain and a MPC-regulator. The reason for choosing this three is to see the difference between simple regulation and more complex regulation with respect to fuel consumption, travel time and complexity.The vehicle simulator is made in Matlab/Simulink, Visual Studio and Open Scene Graph.

Lane Keeping Aid : ett förarstödjande system för bilar

Many traffic incidents are due to the driver?s lack of attention, resulting in dangerous lane departures, either sliding off theroad or into the oppose lane. These kinds of incidents often have serious outcomes, which has led to much effort being concentrated on preventing or lessening the damages when the incident is already a fact, for example by installing safety belts and air bags. These measures may be considered to be acts of so-called passive safety. Active safety on the other hand, means that the safety systems intervene before the incidents have occurred.

FE safety analysis of a high speed wood planer cutter. An alternative method to achieve the requirements of EN847 standard

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Europeiska arkivhandlingar : Europeiskt identitetsskapande i samtida ABM-projekt

The aim of this master?s thesis is to analyse the construction of European identity in three ofcontemporary EU initiated projects for the digitisation of collections from museums, archives, andlibraries. The source material consists of the web pages of the projects Minerva, MICHAEL, andEuropeana, as well as some other policy documents on digitisation and access from EU authorities.Theories on nationalism and construction of heritage are used as an overall context to the problem.After a brief description of the mentioned projects, the author undertakes an analysis of theways that the concept of ?European heritage? is depicted in the source material. The result is thefollowing: normally, the true European heritage is considered being united even though it isdiveded culturally, historically and linguistically.

Sjuksköterskestudenters uppfattning om interprofessionellt lärande

Aim: To evaluate nurse student?s apprehension of an interprofessional seminar as part of training. Method: A descriptive, qualitative study built on the analysis of 43 questionnaires and one group interview with nurse student?s who participated in the seminar. For the analysis of the collected material we used the method of analysis of contents as described by Graneheim and Lundman.

"Man kommer inte särskilt långt om man sitter på sin lilla ö" : En studie om samverkan kring ungdomsarbetslöshet

The aim of this study was to examine the view that officials involved in youth unemployment have on the significance of collaboration between organizations working with unemployed youth. The study was based on nine qualitative interviews with officials from PES offices and from municipalities such as job coaches. The results were analyzed based on qualitative content analysis. The analysis led to two different themes: conditions and the individual. In the analysis two different theories were used, new institutionalism and Lipsky's theory about street-level bureaucrats.

Barnbokens karaktärer ur ett genusperspektiv : normativt eller normutmanande

The aim of this paper is to examine how gender roles are described in two children's books and compare the results against the curriculum Lgr11 's values. The compared books have different aims though one of the analyzed books claimed to go against the gender roles and the other one isn?t. The method of analysis is discourse analysis and deconstruction of the text by using Nikolajeva´s (2004) pattern for stereotype gender descriptions and Kåreland´s (2005) analysis of story actions based on gender representations in children's literature. The analysis of the texts shows that there are differences between how the two books characters are described depending on gender. What emerges is that in one of the books femininity is valued high but instead it lacks equality between the sexes, while in the second book the main characters are described as equal even though the other characters are described in a stereotypical way.

<- Föregående sida 36 Nästa sida ->