This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

Common species of freshwater mussels may, like the freshwater pearl mussel (Margaritifera margaritifera) have a drastic decline in number and there is several reasons, like sedimentation, a decline of host fishes, introduction of alien species, nutrition leakages from agriculture and pollutants of medic drugs and poison. Ann Gustavsson made in the year of 2007 a study over rejuventation of freshwater great mussels in nine watersystems and considered that the rejuventation within the populations were all along the line poor. This study orients from her work and points to determine if there is a connection between the poor juventation and pollution of nitrogen and phosphorous from industries and private sanitations. The study was performed with the software program ArcGIS9.2 to take out drainage areas for the concerned habitats and contact was made with the concerned authoritys. When it comes to supervision of private sanitations is it the countys and for industries is it the county administrative board.

The escalating usage of pyrethroids has resulted in an increased awareness about resistance towards pyrethroids in insects. Pyrethroids inhibit voltage-sensitive sodium channels (VSSC) in nerve cell membranes and are composed of synthetic molecules based on pyrethrins present in pyrethrum extracts from Chrysanthemum species. VSSC are transmembrane proteins that are important for electric signalling over the membrane in insects. Mutations in the gene encoding the sodium channel have proved to be a common reason for resistance against pyrethroids. Pyrethroid resistance among pollen beetles is spread all over Sweden and also abroad and is increasing.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

This study is based on the discussion of the rapid development and use of the Internet and its role in transforming the religious landscape. More specifically it focuses on the Swedish Muslim cyber landscape and how this has changed over the passed twelve years. Göran Larrsons study Svenska cybermuslimska miljöer i början av det 21 århundradet (Swedish Cybermuslim Enviroments in the start of the Twentyfirst Century) from 2001, is being used as a starting and reference point. The general purpose of this essay is to study religious change online. The specific aim is to investigate if and in that case, how and why the Swedish cyber-Islamic landscape has changed and developed in the last twelve years.The questions to be answered in this study are:- What Muslim actors (groups, individuals and organizations) are represented on Swedish web pages in 2013?- Have the Swedish Muslim cyber landscape changed with respect to the number of web pages, content and actors since 2001, and can these changes be understood and analyzed with the help of existing research on religion and new media and Islam and Muslims in Sweden?The result of this essay shows that there has been a dramatic change regarding the activity in the Swedish Muslim cyber landscape.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

Title:Chillchain for cut flowers ? how the distribution works.Author:Anna-Maja Svarén, student at Lund Institute of Technology, mechanical engineering.Supervisors:Annika Olsson, Department of Design Sciences.Bengt Sahlberg, Bioett AB.Problem:How does the distribution of cut flower works regarding temperature, losses, responsibility, complaints, packaging and weak points?Purpose:The purpose is to map the distribution of cut flowers, with focus on losses in the temperature, from farm to store. The goal is to identify weak points in the chillchain and to se how wrong temperatures affect the flowers. The results can be a help to secure the chillchain.Method:The work started with a problem; map the distribution of cut flowers with focus on temperature losses. Data was collected on the basis of this problem, then analysed, and finally conclusions were drawn.Conclusions:The affect handling and distribution has on a cut flower is very complex.

Problem: The corrugated board industry is highly affected by customer uncertainty, various demands and short delivery times. In combination with a complex multi-step production process managers have to be able to identify bottle-necks and gain knowledge and understanding of how different changes in process will affect the production output. <br/><br/>Purpose: The purpose of this master thesis is twofold, (1) to examine applicability of complexity theory through agent-based modelling on a production process (2) to identify improvement areas in order to increase the production output at SKS production site in Eslöv, by modelling and simulating the production process through an agent-based model. <br/><br/>Method: The chosen method of this study is a combination of a case study and a complex system approach. The empirical data was collected through interviews, observation and document studies which were analysed through an agent-based simulation model.

Problem discussion: How should information be handled to facilitate and benefit from modularity? How should Clarkson Inc. adapt their information handling to modularity and what benefits can be reaped by doing this? Purpose: The purpose of this master thesis is to help Clarkson Inc. adapt their information handling to modularity and to extract theories, methods and tools to guide companies in similar situations.

As the cities are becoming more crowded, the urban distribution has become a major logistical challenge. Some commonproblems in the inner cities arelimited accessibility and idling. Many of Sweden's municipalities are above the limit values for PM10limit set by the EU.Sundsvall is one of these municipalities and has the vision to create a sustainable city and region. Sundsvall LogistikparkAB is part of an EU project, SMARTSET, which is collaborationbetween several cities in Europe. SMARTSETSundsvall is about to develop a market-based sustainable model for city logistics.

This study concerns mapping and analysing two different Supply Chains at Setra Group. Setra Group is Sweden?s biggest producer of solid wood and is primarily owned by Sveaskog, Mellanskog and LRF. The Company consist of twelve sawmills, five planning mills and an organisation for distribution of building material. This study maps one chain for Swedish Glulam standard beam and one chain for solid pine flooring on export to Japan. The glulam chain is based on spruce as raw material and includes all actors between sawmill and the Swedish building material retailers.

Introduction:A good work environment and good resources among district nurses? and general nurses? are important in the provision of good nursing care. For patient security it is also very important that resources and time are used in an appropriate way. A lot of time is spent on non-core activity, for example administration takes more and more time, which can result in feelings of stress.Aim:The aim was to describe how district nurses? and nurses? in primary care perceived their work environment, how their worktime content was distributed and if there was some connection between perceived work environment and the distribution of work time.Methods:A mapping of the content of the work was made in two parts.

Under senare år har allt fler organisationer och företag insett hur viktigt det är att identifiera och förstå sina processer, och för att kunna styra och utveckla dem, är det bra att veta vilka de är. Därför vill Reumatologi kliniken veta vad som händer med patienter som har psoriasis artrit, när dem är nyinsjuknade eller ska börja behandlas på deras klinik, samt hur hanteras smärtproblematiken, när de återkommer till kliniken, detta har vi gjort genom att kartlägga processer och sammanställa på vilka olika sätt dessa patienter hanteras på kliniken idag, vart remitteras de? Hur ofta förekommer detta? Vad gör att vissa remitteras och andra inte? Förslag på hur kliniken kan använda denna kartläggning i framtiden.Detta examensarbete genomfördes på uppdrag av:Centrum för Teknik i medicin och hälsa, CTMH, i samarbete med Karolinska Sjukhuset. Arbetet omfattar 15 högskolepoäng.Vid detta arbete har vi använt oss av djupgående intervjuer för att få en djupare insyn i den reumatologiska klinikens handläggningsprocesser. En konstruktionsmodell har utvecklats för att identifiera vilka intervjufrågor som är relevanta för detta projekt.

To maintain production in high salaries countries and strength in competition against other companies, it is today more important than ever to maximize production, offer a wide spectra of products and be able to deliver on the customers desire of shorter and shorter delivery time. Flexible production and short time spent on die changes is vital to achieve these desires. The interest for die changeover time reduction grew in the same pace as the demand for increased product variety grew. SMED as a method of reducing time spent on die changeovers were developed in between 1950-1970, by the Japanese Shigeo Shingo.The purpose of this thesis work has been to investigate the result of SMED in a die casting facility, and compare the result from it with the result considering time spent on die changeovers when investing in new equipment. The goal is to implement a thorough investigation by using the SMED method at Tenhults Pressgjuteri AB and make a brochure that have to be simple to understand, in purpose to draw interest to the advantages of using SMED as a method.Commissioned by the Swedish foundry association Swecast, the work has been carried out by studying die changeovers at Tenhults Pressgjuteri AB, where filming and interviews with the operators have been included in the analysis.