This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

Travelling by train has increased during the last decades in Sweden. This has put pressure on the existing infrastructure and has created problems with delays and cancelled departures. The railway is a complex system with mutual dependencies and high vulnerability for disruptions. The situation for the railway system in the Stockholm region is today strained. The capacity is fully used.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis has been performed at Vattenfall Power Consultant in Gothenburg and Trollhättan for Vattenfall Vattenkraft. In this report vacuum circuit breaker in small-scale hydropower stations with the rated power 4 MVA and below has been studied. Models of the stations are modeled and analyzed in PSCAD/EMTDC to study the high voltage transients that are created after current chopping with vacuum circuit breaker. Vacuum circuit breaker may chop the current before it reaches zero value, which means that high voltage transients can be created. The equipment of the stations can be destroyed by high voltage transients.The purpose of this thesis is to examine the use of vacuum circuit breaker in small-scale hydropower stations and the risk for high voltage transients from current chopping.According to the results there is a risk of high voltage transients after current chopping with small synchronous generators in stations with the operating voltages 0.4 kV and 3.6 kV.

When the producers? responsibility for packaging was introduced in Sweden in 1994 the industry set up public recycling stations to facilitate the collection of the waste material. In order to establish recycling stations at suitable locations the municipalities assist the industry?s service organization for operation of the recycling stations, the Package and Newspaper Collection Service (Förpacknings- och tidningsinsamlingen, FTI). The objectives of this thesis are to improve the service of the public recycling stations within Lidingö town and to increase the accessibility to these stations for the inhabitants of Lidingö.

The invasive species raccoon dog (Nyctereutes procyonoides) is currently under establishment Sweden and it is vital to discover invading individuals to prevent colonization. The use of wildlife cameras to discover dispersing raccoon dogs have been implemented in the north-European raccoon dog management program. In this study, I test the ability of four commercially available scent lures to attract raccoon dogs to camera stations. The study was conducted in the Åland Islands where raccoon dogs are abundant and the results could improve the effectiveness of the camera stations used in the program. I used 12 sites with five camera stations in each and tested the four lures and one control with no lure in each site.

In this thesis, the Train Power System Simulator (TPSS) has been compared and verified with the commercial simulator TracFeed® Simulation (TracFeed). The basis for the comparison was a given part of the Swedish railway system, with steel transportation trains. Primarily, emphasis was placed on running time and energy consumption in simulation results. Two transformer systems were analyzed, booster and auto transformers. The high voltage transmission line, parallel to the railroad track, was disconnected in some simulations.

The company is currently in a stage of improvement and has therefore taken the help of students at School of Engineering, Jonkoping University. The current production is batch, production layout is fixed. A bottleneck is created after the first station which leads to large efficiency loss.  The meaning of this report was to provide a layout suggestion with balanced workstations to a new production line. The conditions were that the production line would be one-way, driven by customers order and meet a demand of 40 products per week.

This essay was written at Södertörn University during the spring semester of 2010, in the field of Business Administration, and more precisely within management and organization. The essay is based on a case study of the management of the staff working at the commuter train stations in Stockholm. The study consists of a number of interviews with the management staff and with the personnel working at the stations, where the aim of the study is to describe how management works within ISS Trafficare AB and what the personnel working at the stations think of it. ISS Trafficare AB is the entrepreneur who runs the commuter train stations in Stockholm by an agreement met with Stockholmståg KB.The study is based on information from the interviews with the personnel and other material from ISS Trafficare AB. Research on the area of management have been used to put data into perspective and to further deepen our analysis and conclusions from the case.The essay shows that the management has tried to implement several changes on the organization in order to provide more service to the travelers.

This essay was written at Södertörn University during the spring semester of 2010, in the field of Business Administration, and more precisely within management and organization. The essay is based on a case study of the management of the staff working at the commuter train stations in Stockholm. The study consists of a number of interviews with the management staff and with the personnel working at the stations, where the aim of the study is to describe how management works within ISS Trafficare AB and what the personnel working at the stations think of it. ISS Trafficare AB is the entrepreneur who runs the commuter train stations in Stockholm by an agreement met with Stockholmståg KB.The study is based on information from the interviews with the personnel and other material from ISS Trafficare AB. Research on the area of management have been used to put data into perspective and to further deepen our analysis and conclusions from the case.The essay shows that the management has tried to implement several changes on the organization in order to provide more service to the travelers.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

The purpose of the work is to analyze and balance an assembly line at Fläkt Woods in Jönköping. The work is going to answer the questions about today?s throughput time, how much waste that occurs, number of staff at the assembly line, how the supply of material works and possible improvements that can be made at the work stations. The work is also going to give a proposal of improve-ments that can be made.The methods used to get the result include observations and measurements, con-versations with technicians and operators and also data from Fläkt Woods? data-base.Large variations in throughput time are measured during the measure period, from 3 hours up to 5 hours and 35 minutes.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.

This thesis examines the reasons to why railway projects conducted by Banverket (Swedish National Rail Administration) could be expected to cause significant effects on the environment, on which grounds the County Administrative Board and Swedish National Rail Administration base their decisions/assumptions and highlight regional differences between the different Swedish national rail administrations regions. Total 24 railway projects, conducted or being conducted, during the time period 2001 - January 2010 have been analyzed and studied. These projects represent eight different measures/activities which are dispersed throughout all five of the Swedish National Rail Administration´s different regions. Swedish legislations demands that the planner of a new railway project shall first conduct a pre-study and then conduct a public consultation which provides the participants an opportunity to provide input. The County Administrative Board shall then decide if the project could cause significant effects on the environment.

The transformation within the swedish infrastructure has been a slow process from thebeginning of time. For almost a decade, the traditional form of contracting regardingbuildings and foremost infrastructure has evolved contracting involving the owner to definethe outcome of the product, regardless involvement from the supposed contractor. As forthe swedish market, the traditional design-bid-build (DBB) have been the primary choice ofcontracting. Although changes have been made over time regarding contracting formswithin the road administration, the railway sector has not improved or justified changesregarding choice of contracting, they have conducted same contracting relationshipsbetween them and the contractor.This bachelor thesis, conducted at the Swedish railway administration with supervision ofprofessor Kristian Widén at Lunds University, explores the forces behind the new era ofcontracting within the railway administration. This bachelor thesis focuses mainly oncontracting regarding design-build-operate-main (DBOM), the new contracting formulabetween the owner and the contractor.