The names of Railway stations and halts along the earliest railway lines on Lithuanian territory have been studied, i.e. along those railway lines built between 1861 and 1873. Especially, attention has been drawn to names that are not obvious regarding the geographical location of the station or halt. Some 50 percent of the names are showing some kind of irregularity in this respect. Most common (about 30 examples) are stations or halts that are serving a population centre situated at some distance from the station, but still bearing the name of that population centre.

The intention of this final thesis is to look into the improvement of small and run down Railway stations. Many Railway stations are today derelict and decaying. The purpose of this essay is to propose alternative strategies of action by discussing the ecology, the history and the social function of the railway station. There is also an overview of projects already completed. In the analysis part of the thesis, the genius loci or the spirit of place is put forward as means of reaching a solution.

The trend in the transport sector is moving towards eco-friendly, fast and convenient transportation,this results in higher demands on railway transports. To meet the demand and quality requirements,the Swedish railway network will have to expand. The cheapest way is to expand little by little butwhat impact do these small steps actually have on the capacity?This thesis examines the interactions of different improvement for the capacity on a single-trackrailway. Through simulations in the software tool RailSys this report studies what effect block signals,extra meeting stations and rebuilding existing two track passing loops to three track loops have onthe capacity.

Due to their complexity and heavy wear from rail traffic, switches are a sensitive part of the railway infrastructure and moreover expensive to maintain. Furthermore, increasing railway traffic not only accelerates the wear rate but also obstructs the necessary maintenance measures. This paper examines the opportunities for a transition to a long-term maintenance strategy in the Swedish railway network. It contains a study of the maintenance strategy of Banverket, and also analyses statistics of errors in the railway infrastructure. The survey was completed utilising interviews with infrastructure managers, maintenance contractors, planners of railway operations and the Banverket material service department.

In the beginning of the 1860s, an important railway was built between Malmö and Stockholm. The railway became one of the most important projects that would influence the entire southern Sweden. The railway line was located to areas outside the ordinary routes and a number of communities were built up along its way.Älmhult was one of the communities that was built up due to the railway. In the beginning there were only a few farms and a station, but a community developed and the village grew. In 1901 the village became a small market town, which was an important event.

The purpose with this thesis work was to design and build a technical aid for installingbatteries in telecom base stations. Today that job is done manually, since there is noequipment on the market for that purpose. Installing batteries in base stations manually isa very tough job.To get ideas for possible solutions a preliminary study on existing lift aids was done.From the preliminary study the conclusion that some kind of overhead crane would besuitable for the task was drawn. After that a lift for installing batteries in base stationswas designed, built and tested. The tests show that it is possible to minimize heavy liftingwhen installing batteries in telecom base stations, at a relatively low cost.ii.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

The purpose of this project was to produce signal relay stations that could receive information via 2.4 GHz radio and relay the information to a designated target station. If a relay station was located outside of signal range for the target station it was supposed to utilize other relay stations to transfer the information to the target station, so called multi-hop.The would-be application of the relay stations was orienteering. When an orienteer punches a checkpoint the signal stations would relay information of who punched the control, when it was punched and the checkpoint that was punched to the speaker tower in the goal area.The work resulted in prototypes which fulfilled the statement of purpose and was tested at an orienteering competition with satisfactory results. The performance of the prototypes was tested and found adequate for the would-be application..

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

AbstractThis report is made in cooperation with the municipality of Vasteras and technical committeestaff. The report addresses several topics that affect fuel stations in Vasteras. The reportcontains two parts, first is a inventory that review all stations in the area to be addressed. Theinventory is made with consideration to various things that geographic situation, whatcompanies are represented and what level of service stations have. And the second part of thereport, is done with the analysis of how it looks in daily situations review.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

This master thesis investigates the possibilities of using GPS-information from trains to create a model of a railway system, register the routes of the the trains and predict how the trains will travel in the railway system.The thesis work was done at Icomera AB which is a company that specializes in internet connected vehicle solutions.We describe how the GPS-information is sent from the trains in the form of samples and investigate limitations and possibilities with the available information. About three million samples from 83 SJ-trains were analysed and the samples were filtered with the intent of removing erroneous information. We here found that about 30 % of the samples from the trains were unreliable.A solution for how the samples from the trains can be used to create a model of the railway system traveled by the trains is presented. We use a large set of historical samples and use cluster nodes and Hermite curves to generate a graph that represent the railway system with stations, nodes and the railway itself. A fully automatic solution is not presented since it did not fit into the time frame of the thesis; instead we created a simple tool which can be used to manually finish the model of the railway system.Furthermore, we describe how the railway system and the samples from the train can be used to register the routes the trains travel.

The purpose of this study is to see how five different local radio stations, P4, within the public service organization Sveriges Radio communicate with their listeners through Facebook and how they differ from each other.We have also studied how the radio stations follow Sveriges Radios? policies for socialmedia usage and how the communication through Facebook can benefit thetraditional radio. Our study contains a combination of quantitative content analysis with qualitative interviews. We studied the five stations? Facebook pages from for the quantitative content analysis and interviewed those who were responsible for the social media pages, such as web editors and channel managers.Our conclusions are that the P4-stations communicate through Facebook to create a dialogue with the listeners and to reach two-way communication; the stations published mostly written updates that encouraged interactivity.