Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

The main project Dry preservation of food waste from households includes a new technique concerning drying and storage of dried biowaste as well as a study of the sorting of household waste and further usage of the dried biowaste. A question asked in the project is, can the dried biowaste be used as a soil amendment? If organic waste is used as a soil amendment, precaution concerning hygienic safety risks has to be accounted for. The objective of this M. Sc.

Society has seen a tremendous increase in threats, violence and especially unprovoked violence perpetrated by youths. Violence and more seriously unprovoked violence has become a major problem for many service corporations as it gives them bad image and reputation. Corporate Social Responsibility CSR encourages many companies to engage in social activities as they realize that the company is part of the society and the environment. What affects society may sooner or later affect the corporate. For any business to prosper and create a long-term relationship with its customers, it needs a safe environment both for the customers and staff.Feedback from customers and staff is survival and these two (customer and staff) are the most vital assets any firm could have.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

Approximately ten people die every year at building sites in Sweden. Every year TheWork Environment Authority (Arbetsmiljöverket) receives 3200 accident reportsfrom the construction sector. The Swedish building contractor Skanska has the vision:?Zero accidents?. Only at Skanska Sweden, where this diploma work is preformed,350-520 accidents and mishaps are reported every year for the last 5 years.

Aim is to investigate from a criminological perspective how the safety questionnaire in Älvsborg police district can be improved theoretically and methodologically, in order for the questionnaire to effectively measure criminal victimisation, concern about crime, safety and confidence in the police.1. What should a good questionnaire contain?- Which methodological problems are related to measuring criminal victimisation, concern about crime and confidence in the police?- Which criminological theories are interesting in this context and how can questions be designed from these theories?2. How will the themes now represented in the questionnaire be measured in the best possible way? Are there any reasons to remove, The material consists of questions from the safety questionnaire, the total analysis report and individual reports for the local authorities, as well the results and technical information from Mind Research.

This essay is about security and safety in the city. More precisely it is concerned about the role of the institutions that aims to raise the perceived security and safety and their understanding of these concepts. I study two of the municipality's project in this field in the city of Malmö. Documents concerning these projects are analysed with a discourse analysis inspired by Chantal Mouffe and Ernesto Laclau as well as Michel Foucault. The two projects consist of one discourse each; the surveillance discourse and the discourse about meetings.

Bacteria are a problem that occurs naturally in dishwashers when the dish stands there dirty for an extended period of time. To get rid of the unpleasant smell that the bacteria is causing, the most common solution is to run a regular washingcycle which can cause problems for the environmentally-conscious consumers since this causes unnecessary energy waste and emissions of chemicals in the washwater. To solve the problem in a more environmentally-friendly way by directly attacking the bacteria with an appropriate bacterialreductionmethod can therefore be an attractive feature in a dishwasher. There are many different ways to treat surfaces that have been exposed to the bacteria. Some high-profile methods are UV-radiation, microwaves and oxidant (ozone) that all three have had success in reducing bacteria in different contexts.

The public sector has through the years been exposed to a rather radical alteration. The aim with this alteration has been to make the public sector more effective. It?s a dynamic society that Norrbottens läns landsting (NLL) operates in today and it is therefore of great importance that the managers get a solid foundation to rely on, since they have a central role in the ambition for efficiency. Another reason to educating the managers is that NLL can secure the future pension losses.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This master thesis comprises analysis and dimensioning of a keyed joint between a generator axis and a hub with aid from the FEM-software ANSYS Workbench 13.0.The generator axis is a part of a hydroelectric power station that generates electricity with a reactions turbine, a Kaplan turbine. The existing keyway consists of one parallel key with the width 90 mm and height 45 mm. Due to a planned increase of the power of the generated power with 32 % a design study was needed to see if the keyed joint would be suitable for the extra force. Because of the fact that the axis diameter is bigger than the standards covers/recommends a the keyway had to be re-dimensioned. In an earlier assignment from Skellefteå Kraft AB to Sweco Energuide the keyway was planned to be properly dimensioned, but no final solution was approved.During this master thesis a number of different numerical tests were made.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

This report contains CFD-simulations of cable tray fires in nuclear power plant applications with the CFD-code SMAFS. Furthermore the report evaluates the use of CFD-codes within this kind of problems. The assessment of this report is that there is a tendency towards the good use of CFD-codes but before using it solely more research has to be done on the subject..

Investors? use borrowing as a way to profit from leverage advantages in their portfolios.When investors borrow with their securities as safety for the loan and the value of thesecurities decrease the investor can get a portfolio with more credit than what is covered bythe value of the securities and risk huge losses. To what extent an investor is allowed toborrow with his portfolio as safety depends on the bank or broker and varies between theproviders. By studying available material and in addition to that making an empirical study Iattempt to find out the reason for the varying degrees of leverage possibilities between thebrokers and how the degree of maximum borrowing on the securities are decided. Thefindings show that decision of leverage degree on a security is made after first making aquantitative analysis of the stocks volatility and liquidity and thereafter make a qualitativeanalysis of the company.

The sun is essential to life on earth and no matter where you are, there is a constant need ofenergy. Nearly 800 000 years ago man learned for the first time to use fire in a controlled way.Since then, fire has given us the opportunity to inhabit places despite a cold climate. In Swedenthe resident sector accounts for a major part of the total consumption of energy. In a time whenenvironmental issues and greenhouse effects are increasing, we also see a future of rising energyprices. With this perspective, we have in this bachelor thesis in the Building Environment at theRoyal Institute of Technology, KTH, in Stockholm decided to focus on the renewable energysource, solar energy.The energy from solar radiation is a free resource and does not have any negative effects uponthe environment.