Article 4.1(h) in the Rome I regulation establishes which law that will be applicable on contracts concerning financial instruments concluded in multilateral systems. The main problem is that most contracts concluded within these systems have standard clauses which contain a clause on the applicable law. If this is the case, Article 3.1 in the Rome I Regulation is applicable instead. This problem makes it difficult to find a need for article 4.1(h) if it will only be applicable in exceptional cases. However, the legal position on this matter is still unclear since the Rome I Regulation has just been put into force.

Increased energy consumption in the world has created an increased supply of various fuels, especially fossil fuels. The Swedish government has set up various energy targets for 2020. To reach these goals it?s important to increase the energy efficiency in local buildings such as schools. This work illustrates the breakdown between energy supply and energy losses over the school.

This thesis has been carried out in New Zealand in collaboration with the University of Waikato. In association with Dr. Mike Duke the purpose of this work is to investigate whether two different software for modeling of photovoltaic systems are useful in the teaching of solar energy.The next ten years grid-connected photovoltaic systems are assumed to increase and therefore also a rising demand for people with engineering knowledge are to be predicted. For engineer students with a focus on solar energy a more practical teaching with design software´s can be a good method to make the students comprehend more when it comes to large scale photovoltaic systems and be more prepared for working life.The software´s used is called Transient System Simulation (TRNSYS) and Photovoltaic Systems (PVSYST) which are both well used throughout the world. To assess the reliability of the software´s, a reference solar power plant at 16.1 kWp installed capacity are used, which consists of photovoltaic modules from four different manufacturers.

The company GEMS PET Systems produces cyclotrons which is a type of particle accelerator. The cyclotrons create log files that are analyzed by the company?s employees for different purposes like troubleshooting or installation. The purpose of the project is to with a usage-centered design method create a paper prototype of a tool that will help the employees to analyze the log files in a more efficient way than earlier.The result shows how the usage-centered design method was used to create the paper prototype and how the user interface was created according to human-computer interaction (HCI)..

This bachelor thesis in science Informatics contains the qualifications for the applying of IT in education for students in elementary school, grade 1-3. By empirical case study on an existing elementary school, whose success on IT use is noticed, describes how to apply IT in the classroom in an adequate way. We look at different theoretical frameworks in interaction and design of systems designed for learning purposes, and satisfies their specific needs and situations within the classroom's four walls. The current lack of statistical measurements on students' results and effects of the use of IT in teaching, prevents further improvements. If we simultaneously work to develop more well-designed systems that are designed for this purpose, it is possible that the effects become more and better.

Ethiopia is the country with most livestock per capita on the continent of Africa. There are 34.5 million cattle that are used for drought, meat- and milkproduction and 85% of the population rely on agriculture for their survival in some way. Milk is produced in four main systems, through pastoralism in the lowlands, in mixed crop-livestock systems in the highlands, in and near big cities with only one or two cows, and in intensive farming systems. There are 17 cattle breeds in Ethiopia and some of them are more suitable for milk production than others. Several environmental and economic problems arise from livestock holding in the country, for example overgrazing, low production due to feed shortage, low quality of the avaible feed and non-existing breeding programs.

When using the digital halftone proofing systems, a closer print match can be achieved compared to what earlier couldbe done with the analogue proofing systems. These proofing systems possibilities to produce accurate print match canas well lead to producing bad print matches as several print related parameters can be adjusted manually in the systemby the user. Therefore, more advanced knowledge in graphic arts technology is required by the user of the system.The prepress company Colorcraft AB wishes to control that their color proofs always have the right quality. This projectwas started with the purpose to find a quality control metod for Colorcraft´s digital halftone proofing system(Kodak Approval XP4).Using a software who supports spectral measuring combined with a spectrophotometer and a control bar, a qualitycontrol system was assembled. This system detects variations that lies out of the proofing system´s natural deviation.The prerequisite for this quality control system is that the tolerances are defined with consideration taken to the proofingsystems natural deviations.

Då marina enheter numera deltar i internationella missioner, kommer den nya miljön som enheterna opererar i att påverka bland annat deras sensorer.Den här studien avhandlar några av de nu framtagna självsanerande ytbeläggningarna och ger en presentation av hur de fungerar på några marina elektrooptiska sensorers yttersta linser.Studien försöker ge svar på ytbeläggningarnas transmittans och hur effektivt de kan sanera bort oönskade saltlager tillsammans med andra nedsmutsande partiklar från sensorlinserna samt den militära nyttan av att använda självsanerande ytbeläggning..

Talented people are recognised as being the most important corporate resource over the next twenty years and a competitive compensation system is an important tool in attracting and retaining talent. Traditional pay systems are recognised as being neither cost effective nor motivating people to do more. Often these systems do not contribute to strategic objectives. This study outlines what constitutes an intelligent remuneration system that will enhance the mind value added by knowledge workers, reward knowledge creation, and contribute to organisational strategies..

In system development it is today increasingly common to use a model-based system development method. These methods that are suited for Agile work with simple and quick updates and implementations of new applications in systems conform to the requirements that are becoming more important today, namely more flexible and less expensive system that still maintain high quality and safety.A company that has been working with this type of system development method for a long time is Genicore AB, which also has developed their own tools and model language in order to better model the information management systems in complex and abstract operations. Genicore AB is trying to spread their method other developers and have therefore taken the initiative to start this study. The method is evaluated and tested by two students with relatively little experience in model-based systems engineering in order to gain a new perspective on how the method functions. The method has been applied to an educational activity in order to test it in a new domain, and this led us to our research question;?What criteria are of particular relevance in the implementation of a MBSD method on on complex businesses??Through literature reviews and interviews, we formed an idea of how model-based system development works from a theoretical perspective, and then continued to the case study conducted on the educational activities at the faculty of IT at University of Gothenburg.

I detta examensarbete har jag undersökt förmågan hos nautiker att ta fram och tillgodogöra sig information från radar och ARPA för sitt beslutsunderlag i trafiksituationer. Syftet var att få förståelse i om fartygsbefäl haft svårigheter att få fram denna mycket relevanta information. Detta gjordes med hjälp av förstudier i form av intervjuer med erfarna fartygsbefäl. Dessa intervjuer gav kriterier som möjliggjorde analyseringen av 13 olycksfallsrapporter, vilket utgjorde litteraturstudien. Dessa rapporter var författade av engelska Department of Transport, Marine Investigation Branch(MAIB), Statenshaverikommission(SHK) och  Sjöfartsverkets rapportserie(SjöfR).

Modeling and simulation is growing ever more important in the development of new products. This thesis describes the use of Hopsan for hydraulic modeling and its use in conjunction with Simulink with the intent of using the model in a hardware-in-the-loop setup. A sensor layer has been created in Simulink to emulate all the internal sensors in a modern forklift. The details of using legacy C-code instead of a hardware MCU for a fully simulated environment, software-in-the-loop has been outlined. There are two major routes one can follow implementing software-in-the-loop, exporting the C-functions to CAPL via a export layer or creating an s-function in Simulink.

En prototyp till en förarstol för det militära fordonet SEP har tagits fram av tidigare anställda på BAE Systems Hägglunds AB i Örnsköldsvik. Stolen måste uppfylla en omfattande mängd krav då den är tänkt att användas i ett stridsfordon, och av personer av varierande storlek. Den nuvarande prototypen för stolen anses dock vara för dyr och det har dessutom framkommit en del klagomål på konstruktionen. Stolen måste därför göras om så den blir både billigare och bättre. Genom att ta del av tidigare genomförda tester på BAE Systems, samt genom att göra nya tester upptäcktes det dels vad som var dåligt och därmed behövde göras om, och dels vad som var bra och kunde tänkas behållas.

This thesis conducts a comparative study between two academiclibraries, one Swedish and one English, in order to analyse ifdifferent funding systems influence the marketing of theirservices. The theoretic foundation is built on relationshipmarketing, which emphasises the importance of creating andmaintaining relationships. A qualitative approach has been usedthrough the use of case studies, with semi-structured interviewsbeing held with library staff and managers in both countries. Inaddition to these interviews strategic plans have also beenanalysed. The result from the study shows that whilst there aresome differences between the two university libraries there arealso similarities, which indicates that it is not clear if differentfunding systems have an impact on the marketing of the services..

The purpose of the thesis is to compare Sweden's and Great Britain's total costs for their systems regulating producer responsibility for waste packages. Producer resonsibility is a strategy implying that producers are responsible for their waste also after its use. Sweden and Great Britain introduced different systems systems after an EU directive was adopted in 1994 (94/62/EC), and they have resulted in entirely different recycling levels in the two countries. In the Swedish system, responsibility has been delegated to the industry who are responsible for reaching the determined goals. The economic instrument used is a fee, set and managed by the industry. The British system is more centrilised, and the economic instrument used to finance recycling of waste is a system based on transferable permits. The thesis compares the four different alternatives: delegated and centralised methods, and fees and transferable permits analytically.