Sweden and the surrounding countries have reorganised their armies towards a manoeuvre warfare concept. In Sweden new regulations were produced in the middle of the 90s using manoeuvre warfare as a basic idea. The purpose of this paper is to produce a clearer picture of the Swedish manoeuvre warfare concept and how it can be implemented. An inductive method of working has been used, qualitative data has been gathered and studied.The Swedish manoeuvre warfare concept has been difficult to define because of indistinct actions. It is only after complementing interviews that the picture has cleared up.

AbstractTitle: Strategic Communication within franchising, a case study of GallerixNumber of pages: 60 (65 with enclosures)Author: Charlotta Babington ThorszeliusCourse: Media and Communication DPeriod: Spring 2008University: Division of Media and Communication, Department of Information Science, Uppsala University, SwedenPurpose/Aim: To find out, by doing a case study, how communication between the two parties in a franchising relationship works, and how communication can strengthen the concept and brand. By analysing the communication, identify strengths and weaknesses and make suggestions for improvement.Material/Method: Qualitative method by using interviewsMain results: The understanding of the concept and the relationship between franchiser and franchisees are vital for the success of the franchising chain. The main internal communication channel today is the Intranet, and more personal contacts and meetings are requested. The yearly meetings are appreciated by the franchisees, but the content of the meetings are of varied quality. The chains value words, which are important for how the brand is perceived by the customer, are slightly different from how the franchiser and the franchisees sees them.

The main purpose of this Master Thesis has been to investigate issues concerning apple fruit quality in orchards of Äppelriket Österlen. The goal has been to develop a document, for future benefit towards growers and company management in the production of high quality apples.In order to investigate main issues of fruit quality, focus has been on statistics concerning apple varieties, age of the apple trees, new planting, orchard size and growers opinions. Nine growers have been interviewed to investigate opinions and contribution of different growing techniques to increased fruit quality. The investigation showed high age of the trees in production and low rate of planting of new trees. Differences in fruit quality were highest between small orchards. Most growers were satisfied with their fruit quality and with their own measures made to improve it.

Background: Earlier studies show that nurses work environment is a factor that may affect the quality in nursing care negatively. Other factors are: number of employees, working hours, work structure and planning and working relationships between colleagues. Work relationships are particularly important for nurses as they can affect patient safety. Nurses are prone to stressrelated illnesses and high stress levels prove to have a negative affect on the quality of nursing care. To develop and assure the quality demands effort from every employee.

AbstractThe urgency to find alternative fabrics to conventionally produced cotton is increasing as vast amounts of agrochemicals are used and a lot of irrigation is required. In this literature survey the potential of organic cultivation practices to produce highly qualitative hemp fibre, suitable for the textile industry, was investigated. The definition of a fibre in the textile context as well as of the qualities that are essential for a textile fibre was necessary as a base for the discussion in this thesis. The quality parameters looked at were fineness, strength, length, friction, and colour. The impact of external growth factors and plant development on these quality properties are discussed.

This essay studies the concept of "livspusslet", a term in swedish that directly translates as "the jigsaw puzzle of life". In recent public debate it has been used to articulate issues concerning the combination of family life and a professional career. The empirical material consists of newspaper articles from nationwide daily newspapers Dagens Nyheter and Svenska Dagbladet between 2009 and 2011. The concept of "livspusslet" relates to the debate about family values, gender equality and the public view on the issue of combining family life with a career. The widespread use of the concept indicates that the social practices surrounding the debate over family policy is shifting.

This Master Thesis has been carried out as a new product development project in collaborationwith G-Man Tools AB located in Edsbyn. The purpose of the project was to construct a newpruning saw there the blade is integrateble in the handle, thus a foldable pruning saw.The work has been performed on the occasion of G-Man Tools AB wanted to improve theirproduct range by creating a saw that complement their range of quality saws. They have a similarproduct today, but they do not manufacture this product by them selves and it is not directlytargeted against garden use, which is a disadvantage when it is one of their major markets.Even though almost the entire chain from the requirements of the users to drawings has beentaken into consideration, emphasizes has been put on generating ideas. However the first thingthat was carried out was to establish a productspecifikation from interviews with users and thecompany?s experience.

The aim of this essay has been to surrey the perspective of view the special education teachers have on the tree concepts of special education, compensatory-, critical and dilemma perspectiveThe questions that have been covered in this study areWhat does the concept of special education means for the special teachers? What does the concept of mathematic difficulties means for the special teachers?What does the concept of the diagnostics of dyscalculia means for the special teachers?A qualitative research method has been used to answer the questions in this essay. In the purpose to get the most out of the study..

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

In recent years, employees at large companies have started to demand that their employer should work more for good causes. The money the company wants to donate to charity is distributed mostly through a vote to decide where the money will be remitted. The purpose of this design case is to develop a design concept for a web-based donation service that involves all employees at a company. Furthermore, the authors of this study intends to explore how the motivation for employees of a company can be affected by participation in this service. In this design case, the service function, quality and concept was tested and evaluated.

Upon marketing the system in Europe and the USA cost savings generated from reduced work force have been prevailing. Since the cost of labour is much lower in the Asia Pacific region other factors have to be stressed. The parameters of flexibility and quality assurance may however cover any initial investment in a production system. Our purpose is to value flexibility and quality in a manufacturing context, applied to DAS, in order to use it in investment calculations. In order to make an adequate estimation of different companies, due to problems associated with acquiring correct figures, the Key Success Factors needs to be examined so that the gathering of numbers can be conducted with more focus.

We have made a qualitative study where we have chosen to interview a number of respondents consisting of ophthalmologists, eye nurses and patients. The purpose of the study was to examine employees' perceptions of patient-related status and treatment and quality, and meaningful participation in the work. The conducted interviews, we then sat in relation to how patients experienced the visit to the eye clinic and their perception of accessibility and hospitality. The result is then compared against the policy of the Title use of internally and we have also tried to explain what is happening with the help of various theorists. Theorist that we made use of is Maslow, Foucault, Deming (TQM) and Herzberg.