This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Quality Control is a term often used within production and is referring to managing processes so they produce capable products. Within Quality Control, process capability index is a common measure to oversee processes. Safety Region Plots were introduced to do this graphically. In Albing & Vännman (2010) the concept of Safety Region Plots is expanded to incorporate an elliptical shape. The method of Elliptical Safety Region Plots assumes a normally distributed data.

In this master thesis I investigate different views on literary quality in two quite different library journals; Biblioteksbladet and Bibliotek i Samhälle. One aim of the study is to see whether the ambiguity of the term literary quality is considered. Since there is no universally accepted definition of literary quality to be found the analysis is inspired by discourse analysis. This theoretical frame work starts off in the assumption that our views of the world are much dependent the way we describe it. The work of Finnish scholar Sanna Talja is presented and the results of this thesis are compared with the three perspectives on music culture that are presented in her book.

This study aimed to describe children?s experience of living with overweight or obesity, by using a literature-review. The study includes eleven articles, data is from children between ages 5-15 year. The result occurring were in the areas; Quality of life and self-esteem, Social company, Body concept and weight reduction and Psychological unhealth. BMI above what is recommended gives a negative influence on quality of live and self-esteem.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Sometimes one get sucked in old thinking which results in that the development brakes down. This is exactly what has happened in the industry Baby Versatile Concept will enter. With innovative solutions on elementary problems and new developed functions the marked not yet seen will the product take land. Though the problem already from start had high potential it was no surprise that, by the realization of the ideas in mars, interested venture capital of four hundred thousand Swedish kronor. Already by the start of the project a concept patent was planned and will now be realized.

Quality was earlier only an issue for the company?s quality departments but today is the entire organization involved in quality- and improvements work. With the customers in focus, both external and internal, quality and improvement work should be integrated in the daily activities. The management shall state goals and visions together with a policy. Through participation the correct requirements for a successful work are created.With SPC, statistics process control, there is an opportunity to perceive variations in the process and with the correct tools make it stable.

Having an ileostomy can affect the quality of life. Quality of life is defined by Siri Naess as being active, relating well to others, having self-esteem and having a basic mood of happiness. The nurse?s task is to focus on the stoma care and work in a holistic way. The aim of the study was to describe how adults with permanent ileostomy experience their quality of life.

This thesis describes possibilities for Metso Paper to lower their costs of spray pipes for their pulp wash press TRPE, with maintained good functionality and quality.Information that can be used by competitors has been censored in this version of the essay.To find solutions, alternative suppliers have been contacted and asked to quote. There has also been a new spray pipe designed. The manufacturing costs of the new design have been calculated.The thesis also contains a concept generation of an alternative product to the spray pipes in installations where a high pressure washer is used.To be able to ask other manufacturers of spray pipes to quote, a demand specification based on the currently used spray pipe was made. This was then sent to two alternative suppliers.An investigation of earlier used spray pipes, and the currently used, shows that the nozzles are a big part of the total costs of the spray pipes. To attempt to reduce the nozzles high cost an concept generation was made to find the best solution for a new design.There was a request that it should be possible to change the internal brushes in the spray pipe without cutting and welding.

Aim: Through the review of scientific articles, this study aimed to identify which oral health-related quality of life instruments that have been used in studies to measure the oral health-related quality of life in older individuals and the application of such instruments.Method: The study is based on a systematic literature review, where 14 articles have been chosen and evaluated against a checklist. Result: The oral health-related quality of life instruments that have been used on individuals, 65 years and older, are OHIP-49, OHIP-14, OHIP-20 or OHIP-EDENT, GOHAI and OIDP. The instruments are used to examine factors associated with the oral health-related quality of life. Significant associations have been identified, among other things, between the number of teeth in static occlusion, dry mouth and the quality of the dentures, and oral health-related quality of life. Social and cultural associations have also been revealed.Conclusions: Today there exist several well functioning instruments that are used for research purposes.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

My essay deals with a problem in our society which, in my opinion, has been neglected. Even today in 2011, the quality of schools and preschools is extremely varied. This has been a problem for a long time and not nearly enough attention has been paid to it.In my essay I have tried to understand what it is that causes these differences in quality between preschools. With help from literature and research studies I have examined what quality in preschool really means.My starting point is an account of my own experience at the preschool where I currently work and a description of a study visit I made to another preschool which operates in a very different way to the one where I work. I wanted to investigate what the consequences are for children who grow up attending preschools of different quality.