This paper intends to examine the knowledge challenges in small IT companies which is going through rapid growth. The movement of information and knowledge is a social and very complex process. The challenge for technology is the social as information and knowledge requires. To believe blindly that technology will solve the problem is what many people think. In order to understand how technology can support information and knowledge management one needs to understand what information and knowledge is.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey was performed. The voltages and currents have continuously been sampled in the incoming 10 kV substation HSP01 from April-August 2008. Power quality measurements were also performed in Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of the induction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps to the plant. The reason for the latter measurement was due to registered negative transients each time the motor was connected to the grid. The cause of the transients could be explained by the coupling in the substation, the ageing of the motor which could result in damage of the bearings or resonance in the motor circuit which amplifies high frequency harmonics.

The purpose of this thesis is to examine the quality notions used by the library personnel responsible for the video game department at Malmo City Library. Furthermore, the thesis aims to assess how these notions of quality relate to properties of the actual collection of video games. The empirical results are based on interviews with the responsible library personnel. The result is then analyzed by an interpretation of Carl Gustav Johannsen?s library adapted, theory-based, model of quality definitions.

The forest property Fagerdal 2:10 was donated to the Swedish University of Agriculture in 1995 by Erik Rönnberg. The dominating species is Norwegian spruce (Picea Abies) and the average age is high due to selective cutting. The aim of this study has been to analyze how the forest on the property should be managed and demonstrate how a better estimated forest data affects the future management. The impact of the management on the carbon stock of the property was also examined. A forestry plan established in 2009 by Skogssällskapet was used as a basis for the analyses.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

On a request from the water sewage plant Gryaab in Gothenburg a power quality survey wasperformed. The voltages and currents have continuously been sampled in the incoming 10 kVsubstation HSP01 from April-August 2008. Power quality measurements were also performedin Gryaabs other 10 kV substation HSP04 fed from HSP01 and at the terminals of theinduction motor IN_PU4040 of 1.3 MW which controls one of the four large inflow pumps tothe plant. The reason for the latter measurement was due to registered negative transients eachtime the motor was connected to the grid. The cause of the transients could be explained by thecoupling in the substation, the ageing of the motor which could result in damage of thebearings or resonance in the motor circuit which amplifies high frequency harmonics.

En sammanfattning av uppsatsen på maximalt 8000 tecken..

En sammanfattning av uppsatsen på maximalt 8000 tecken..

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The paper investigates the role of packaging within brand management of FMCG food companies and their attitude towards packaging. This study enhances the understanding of how FMCG food companies actually work and strive to work with packaging..

2013 a decision was made that all projects at the Swedish Transport Administration shoulduse BIM (Building Information Modeling) to some extent from 2015. BIM is an approachthat allows for streamlining of projects by the use of a 3D-model created in an early stage ofthe project. The 3D-model can carry information about the facility throughout its life cyclefrom planning to management. The use of a 3D-model can help the project to detect errors inearly stages of the project when it is easy and cheap to fix the error instead of finding theerror in the construction phase when it is costly and time consuming to fix it. 3D-models alsolead to improved communication both within the project groups and with the public.

Att upprätthålla en effektiv konkurrens är något som EG-rätten syftar till. Genom artikel 82 i EG-fördraget förhindras dominerande företag att via ensidiga förfaranden utestänga konkurrenter eller begränsa konkurrensen. Det finns flera sätt, för ett dominerande företag, att påverka konkurrensen negativt och därmed göra sig skyldigt till missbruk enligt artikel 82. Ett förfarande som under vissa omständigheter kan anses som missbruk är att leveransvägra för att stoppa eller begränsa parallellimporten. I denna uppsats diskuteras och analyseras det om under vilka förutsättningar en leveransvägran kan anses som ett missbruk av en dominerande ställning.

In order to counteract and to discover unethical actions within an organisation, a growing number of Swedish companies implement a so-called whistleblowing system. The purpose of our essay is to study the mindset of companies and further analyse how this mindset affects the design and quality of companies' whistleblowing systems. To do this, we have used a qualitative approach by interviewing different Swedish companies about their mindsets and systems. The study determines that there seemingly are three different categories of systems of varying quality. In this study we have chosen to call them "internal system", "external system" and "combined system".

 Conclusion:Medical treatment may have a role in platelet count after transfusion. Since the TACSI platelets passed the quality requirements, and the vast majority of patients platelet count increased after TACSI platelet transfusion, the TACSI platelets will replace the old method to produce platelets at the Uppsala University hospital.  Methods: A new approach that pools 8 buffy coats (TACSI platelets) that were separated into 2 units instead of 4-6 buffy coats pooled to 1 unit was investigated in this study. After the platelets were extracted from the buffy coats their quality was controlled and subsequently the platelet product was evaluated in 96 patients. Results: The results showed that 80 % of the platelet units passed the European quality requirements. Further, the platelet count was increased in most patients that received TACSI platelets. Conclusion: Medical treatment may have a role in platelet count after transfusion.