With background in the rapidly growing need to find solutions for sustainable energy production and the increasing interest for wind power, this report was written. With take-off point from the wind power plant Big Glenn, which has been built in the harbour of Gothenburg, a model of the adjacent power grid has been created in Simulink/SimPowerSystems. Parameters for the power grid and its components has been provided by Göteborg Energi Nät, that has also been the supplier of measurement data of produced power, the power need from loads in the vicinity, voltage levels, current values and also the variation of power factor at the wind power plant.The SimPowerSystems model has been used to perform simulations of power flow in the grid. These simulated values have then been compared to the measured values to verify the functionality of the model. Further, the model has been used to perform simulations of a grid fault, which causes a voltage drop.

The Swedish alcohol market has for many years been in the hands of the government. The question of the monopoly, its being or not being, has for a long time engaged both Swedish citizens and politicians. Since joining the European Union it has also been on the European agenda, trying to adapt Sweden to the more liberal alcohol politic in Europe.The suppliers find themselves acting on a completely different market than a market based on free competition. The suppliers are faced with one retail channel to the stores which creates dependence and uneven power balance towards the retailer. In addition to this, their marketing activities are strictly limited due to the laws and claims.

Background: Many companies have outsourced their IT-operations and their expectations of what this IT-outsourcing will contribute to the business are high. Cost cuts are not always a natural outcome of IT-outsourcing. Many companies that have outsourced their IT-operations consider it to be problematic and complex to exercise management control and reach cost control which was the purpose of the IT-outsourcing. Purpose: To describe and analyze what affect IT-outsourcing has on a company?s management control system and a company?s possibility to exercise cost control.

The thesis deals with three document retrieval models based on logic: the Boolean model,the fuzzy model and the Van Rijsbergen model.In Chapter 1, the author presents the purpose of the thesis. This is to give the logical foundationof the models, to describe them and to examine them critically. In Chapter 2, some importantnotions in document retrieval are presented. Chapter 3 is devoted to the Boolean model, Chapter4 to the fuzzy model and Chapter 5 to the Van Rijsbergen model.These three chapters are organized in the same way. First, the logical foundation of the modelis given.

Background: Performance measurement as a management control tool has received considerable academic attention. As the number of inter-organisational relationships, such as customer-supplier relationships, increases, there is a new scope for performance measurement as a management control tool. In order for a company to assess the effectiveness of its supplier relationships it has to define, measure and evaluate variables that are critical for the success of the relationship. The role of management control, and thereby of performance measurement, has increasingly been discussed in theory. However, empirical research in this area is still somewhat limited.

Researchers and practitioners have recognized the need for ?transforming? every policy of the company into a competitive advantage tool. Thus, both the pricing approach and the supply chain practices of the firm have emerged as an important determinant of success. In this study, however, we are not only interested in these two aspects, but also in a third one-namely cultural conflicts as an obstacle and challenge. The interaction of the tree factors is extensively presented against the backdrop of Skanska and four of their closest Polish suppliers.

Title: What drives the customer's choice of packaging and which factors influence the customer's packaging cost? ? in the automotive and manufacturing industriesAuthor: Lena AnderssonSupervisors: Annika Olsson, Division of Packaging Logistics, Lund Institute of TechnologyHelena Claesson, Volvo Logistics ABProblem: Which parameters are important for logistic people to think of when they are going to choose a package?Which cost factors are included in the packaging cost?What kind of added value can an emballage supplier provide their services with?Purpose: The purpose of the project was to study the parameters that drives the customer's choice of packaging and the factors that influence the total packaging cost. The study also consists of a valuation of what an emballage supplier can offer to add value to their services.Method: The study is based on interviews with people who are working at Volvo Logistics and Volvo Car Corporation. Volvo Logistics provide their customers with standard packaging material, which they own and administrate. Volvo Car Corporation is one of their customers.

This essay describes some factors that may effect small business survival in relation to becoming a supplier for bigger companies that may implement the use of EDI for electronic invoicing.The purpose of this study is to analyse and evaluate what impact may occur during the introduction of EDI between small and big business.Following on from the introduction of methods used in this study there will be a complete analysis made detailing results.From our research we have found that most small business have developed a professional working relationship between themselves and their clients.The adoption of EDI by big business has revolutionised the day to day dealings between both supplier and consumer in that EDI has empowered both chains to collaborate data in real time.In conclusion our research illustrates that in order for small business to survive the must implement EDI. The results of our study have shown that the introduction of EDI to both small and big business has had a positive outcome..

Management by contract is nowadays a common method within the public sector since the NPM overtook as paradigm with its mechanisms of control inspired by the private sector. The public agency is foremost a service provider where they interact with citizens in the service process. Swedish eldercare has significantly increased its expose to competition which means that eldercare can be executed not only by the municipalities own provider. Such an adaption increases the requirements to inspect quality and how the purchasers assure goal achievement by control. The outmost liability stays with the municipality to ensure that the service produces god care since their position as the service purchaser implies the responsibility to plan, precise and evaluate the required work that the executor has to accomplish.

The purpose with this masters thesis was to model the scanner in a system for laser bathymetry. The model was then used to develop a controller for the scanner so a good search pattern was achieved. Two different types of models have been tested, a physical model and a Black Box model of Box Jenkins type. The physical model has been derived from Lagranges equations. Identification experiments have been used to compute the Black Box model and to find the unknown parameters in the physical model.

This study looks into the possibility, and profitability, of expanding a pilot project that has been put into action at GGP Sweden AB in Tranås, a manufacturing company that produces front mowers. The pilot project is meant to give GGP Sweden AB a more precise control of the flow of goods from their suppliers, and its essence has proven to be quite similar to the Japanese Just-in-Time philosophy.The study has been divided into four separate areas; mapping, supplier selection, supplier evaluation and cost analysis. These areas represent a holistic perspective on the expansion of the pilot project and cover topics varying from methods of finding suitable JIT-suppliers, constructing Key Performance Indicators (KPI) to reviewing costs and assessing profitabilities.In this report, the reader will initially take part in the works of mapping GGP?s manufacturing unit, pilot project and supplier base, which results in a list containing the most suitable suppliers for a Just-in-Time based collaboration. Afterwards, the reader will be led into the area of supplier evaluation, where five KPI?s are created with the purpose of ensuring that GGP will be able to evaluate their suppliers and pilot project in an effective way.

Background: The strategic importance of purchasing departments is increasing, yet supply risks are rather uncharted. The procurement of coffee involves supply risks and the purchaser needs to be able to handle these to enable the roasting-house to produce coffee as specified. Purpose: To chart risks in connection with the procurement of coffee as well as the possibilities of handling these. The thesis also examines if general risk management theories are applicable on the supply risk present within Swedish roasting-houses and can become an integral partof the purchasing process. Method: A qualitative case study of the purchasing process of Swedish roasting- houses.

One of the most distinguishing features for companies today is that they must have a close collaboration and keep up a good relationship with their suppliers. This is important for the companies chance of survival and for them to compete in their markets. This essay will discuss the subject of Scania?s long-term collaboration with their suppliers. The purpose of the essay in this case study is to analyze if a long-term cooperation with a supplier is of essence upon renegotiations of continued collaboration.

Haldex Barnes Hydraulics (HBH) is a company which produces hydraulic aggregates for use in forklifts, construction equipment, and trucks. The last two years the company has expanded. This has lead to an insufficient production of aggregates. Thus wishes HBH to increase their production without making to large investments.This report includes a now-state analysis of the problems and where they are. From this a further analysis of possible improvements are made.HBH works mainly with assembling and this is made manually.

Abstract Title: How to source from Russia? - A multiple case study of six companies? experience of purchasing in Russia. Authors: Richard Werthén, Technology ManagementJohan Öhlén, Production Engineering and Management Supervisors: Christer Kedström, Dept of Business Administration Johan Lundin, Dept of Industrial Management and Logistics, Engineering LogisticsRolf Blomgren, Purchasing Manager SR, ScaniaLars Erik Nerback, Purchasing Director SE, Scania Issues: The issues presented are:? What characterise Russia as a supplier market?? Which sourcing experiences have been made by other Swedish companies in Russia?? How can this knowledge be utilised at Scania? Purpose: The purpose of this master thesis is to find out whether it is worthwhile for Scania to look for new suppliers in Russia, based on other Swedish companies? experiences of purchasing in the country. Method: In order to answer the purpose of our thesis the study of Scania?s purchasing organisation has to be complemented with in-depth studies of other companies? purchasing organisations.