The aim of this Master?s thesis is to investigate if the library can be a real partner for researchers in managing and dealing with their research information. In this study, six researchers have been interviewed about their problems with information management. This study uses the method Critical Incident Technique for the interviews with the researchers. This method focuses mainly on problems and what happens around those problems.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This paper investigates the ongoing talks between the Swedish libraryassociation (Svensk Biblioteksförening) and the Swedish Publishers?Association (Svenska Förläggareföreningen) regarding a new payment modelfor e-book loans in Swedish public libraries. The current model allows an ebookto be lent an infinite number of times and for each loan the library paystwenty Swedish kronor to the supplier, Elib, which in turn passes half of thatsum on to the publicers.The reason for the talks is that both libraries and publishers have reason to bedispleased with the current model. For the libraries it has proven to be aneconomic challenge, for the already strained library economies, sincepayment is made directly by the individual library from the media budget.The publishers also have reasons to want a change of model since thecompensation they receive from the libraries is not enough for them tocontinue publishing e-books and making a profit. They argue that to protectthe commercial e-book market the principle of free loans has to be replacedby a model that introduces ?friction? in the form of limitations on how manytimes a title can be loaned.This study is based on interviews with representatives from both sidesinvolved in the talks, along with a representative from Elib and a librarian.An analytical tool has been constructed by the author to aid in the process ofuncovering arguments and standpoints in the interviews.

Evaporation is a part of the chemical recovery department at wood pulping mills. The purpose of evaporation is to remove water from the black liquor, which makes the liquor combustible. The process is very energy demanding, and having a well-functioning model of the system is of greatest interest. The model can then be used to study energy consumption and to test different control strategies. Two models have been developed during the master thesis.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

The public sector is a major purchaser of goods and services. By setting requirements for environmental and social considerations in public procurement, an authority has the possibility to use consumer power to influence the actors in a market. The purpose of this paper is to investigate public procurement of textile products in a municipality, in order to gain knowledge about factors that may be important for the use of environmental and social criteria. Håkan Hydén´s (professor in sociology of law) norm model was used as the basis of the analysis, where the conduct was investigated along three dimensions of the norm ? willingness, knowledge and system conditions ? in order to identify underlying factors that can influence the process.The results ? analyzed by using interviews and documents ? show that the procurer's willingness, motivation and knowledge are important factors in this context, as well as the political priority of the municipality.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The aim of this master thesis was to create a dynamic model for the processes in a solid fuel boiler of the moving grate type. Another aim with the model was to keep it as simple as possible but still able to catch the dynamics of the processes in the bedplate of the boiler. The creation of the model had its origin from drying and combustion equations used in earlier modeling work of boilers. The represented model has been used to simulate different kinds of disturbances in a boiler and different ways to control the boiler. These tests show that controlling a number of parameters in the bed of the boiler is an effective way to keep the grate stable during disturbances.

This master?s thesis describes the development of a model of the catalystsystem aiming at control by an MPC. A well functioning model, which is suitable in control purpose, is important while emission legislation become more and more hard to fulfill for the car manufacturers. Much research has been done in the field of physical modeling of the system, but in this work a linear adaptive time discrete ARX-model is developed and validated.The systems tendency to change its dynamic during usage implies that the model must be adaptive. The developed model proved to be well functioning and shows promising conditions for the MPC design.

Problem: The relations between first and second tier suppliers within the automotive industry have changed drastically during recent years. Previously involving the supply of simple components, today the relation involves collaborative product development of complex subsystems. The situation is rather new for the actors, hence there are a number of problems that act as restraints for the collaboration. In order to come to terms with these problems, it is important to determine the underlying causes. Purpose: The purpose of this thesis is to make a survey of the main problems in the collaborative product development between first and second tier suppliers within the Swedish automotive industry.

 Level:                                 Master thesis in business administration, 15 creditsDate of seminar:                2009-05-29Title:                                  Stick to your knitting ? Outsourcing of the economic function in some small private limited companies in VästeråsAuthors:                             Johanna Eriksson 1982johanna.erik@gmail.comSandra Hansson 1982shn04005@gmail.comTutor:                                 Leif CarlssonPurpose:                             From a company perspective describe why the chosen companies in Västerås decided to either outsource or to have their economic function internally, define how the outsourcing process looks like and examine how the companies that have chosen to outsource have experienced their outsourcing situation. Further, we wish to contribute with advice for companies that are considering the option of outsourcing their economic function.Method:                             An intensive study of existing literature and a pre-study were conducted in order to create a framework for the thesis. The pre-study was conducted with one business counselor and two suppliers of economic services and resulted in local practical examples that supplemented the found literature. The main research consisted of semi-structured personal interviews among twelve companies in different sizes in Västerås.

This report describes a synchronous machine model with magnetic saturation in d-axis, neutralconnection and electrical exciter interface for the transient simulator PSCAD/EMTDC. It hasbeen designed and verified in comparison to the regular machine model in EMTDC.The performance of the model is very good when incorporating a linear as well as a saturatedmagnetising inductance. The dynamic deviation is only thousandths to ten thousandths perunit. By using a cubic interpolation of the saturation curve, the model gives a good representationof the saturation effect. The open source code implementation of the synchronousmachine model gives the possibility to easily adapt the model to specific requirements.The derived model makes it possible to simulate a synchronous machine with its excitationsystems, e.g.

The purpose of this thesis was to analyse, model and finally generate dynamic vehicular motions in a train. The objective with the analysis was to find important motions for a realistic train experience. The motions from the analysis were then weighted against possibilities for generation in a motion platform.A dynamic motion model was created to model the selected motions. The model was implemented in a simulation environment, more specifically MATLAB/Simulink. The simulation environment was used to simulate the model and to generate outputs to control a motion platform.

This project consists of an adaptation, trial and evaluation of a model for practicing. Based on prior research I created a model aiming mainly to raise a musician?s self- awareness around the different parameters a performance consists of. An additional wish was for it to simultaneously assist the musician in monitoring his or her progress. With video recording and self-evaluation as the two main parts I tried the model by using it over a period of three months.

In this report a model was constructed in order to determine how a number of covariates influence the gross domestic product, GDP. The covariates were chosen depending on their expected influence on GDP, for example education and life expectancy. The data used in this report are collected from the World Bank. The model to describe GDP has been calculated using multiple line arregression. In order to reach a reliable final model the number of covariates has been gradually decreased to eliminate insignificant covariates.