Hallsta paper mill uses large amounts of water during the pulp and paper making processes. The wastewater is treated in two separate activated sludge processes referred to as BIO 1 and BIO 2. The main aim is to reduce the organic substance content, measured as COD (Chemical Oxygen Demand) before the wastewater is released into the environment. Since the effluent produced is very rich in organic substances, the addition of nitrogen (N) and phosphorus (P) are necessary to give satisfactory treatment results. Problems with sludge bulking sometimes occur which lead to increased levels of suspended matter and nutrients in the effluent.

This Master Thesis is a product development project that has been carried out incooperation with Metso Paper Sundsvall AB. The task has been to develop a holdingsolution that generates force between two rolls and to evaluate the new solution withrespect to functionality, manufacturing, structural stability, costs, assembly etc. Theroll holding solution is a system that is part of a rollpress. The rollpress is used towash and dewater pulp. The existing solution creates forces that have to be absorbedby the gable of the press.

Competition of spruce fiber raw materials has increased dramatically in the last few years, leading to the fact that transportation costs in the current situation represents a much larger share of the total raw material cost. The Holmen-owned pulp industry Hallsta Paper Mill's location on the coast also constitutes a problem, because of the lack of raw material, which is much larger there, than for a pulp mill located in the hinterland. For a coastal industry it?s therefore natural to import much of the raw material by boat or to buy it from the timber terminals, in order to maintain good profitability. The purpose of this study was to analyze how the size of Hallsta Paper Mill timber supply area, without competition, with competition and with terminal use, affects the company ?s transport costs.

The Swedish Government has decided that Wind power should have a higher contribution to the electricity generation in Sweden. Their goal is that, by 2015, the yearly production by Wind power should generate 10 TWh. In year of 2006, the 760 wind mills in Sweden generated only 0,936 TWh. Despite good wind conditions in a large extend of Sweden's land- and coast areas, the slow rate of new wind mills establishments will likely result in unattainable goals. The major problem for new establishments of wind mills is the extensive and complicated permission process. An expert group of environmental studies (Expertgruppen för miljöstudier) was commissioned by the Government to make a report concerning the problems with the expansion of wind power in Sweden.

In conventional viscose manufacturing, a large amount of carbondisulfide is consumed. This amount has to be decreased to keep the production cost down and to reduce the environmental impact. The purpose with this work was to show if an enzyme treatment of a dissolving pulp could increase the degree of substitution in the viscose so that the amount of carbon disulfide consumed in the process could be decreased. Previous investigations by Kvarnlöf (2007), Engström et.al. (2006) and Henriksson et.al.

Deposits can be formed in the paper machine due to sticky materials from wood and recycled paper. These deposits get stuck on process equipment and cause the product quality to deteriorate and the efficiency of the paper machine is reduced. The purpose of this thesis is to increase the understanding about deposits among machine operators, and to suggest methods that can be used to reduce the amount of deposits formed in Bravikens paper machines.To fulfill the purpose of the thesis a pre-study, a literature review and interviews with machine operators and production staff, were carried out. These methods led to the planning and creation of an education about deposits for machine operators.The education about deposits for machine operators consisted of an interactive lecture to introduce the subject of deposits and a subsequent discussion. This approach was chosen to give the machine operators the opportunity to discuss their work situation on the paper machines related to their new knowledge about deposits.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

Syftet med denna uppsats är att undersöka om Karl Marx och Wright Mills teorier om alienation går att koppla till en högstadiemusiklärares arbetssituation och hur denna koppling i så fall ser ut. Eftersom tankarna och teorierna om alienation berör mångt och mycket så har jag valt att behrönsa teorianvändningen till två perspektiv som jag kallar det ideala arbetet(från Karl Marx) och alienation som diskrepansteori(från Wright Mills). Dessa teorier har i sin tur omformats till hypoteser för att underlätta analysen. Metoden som jag har valt för denna undersökning är samtalsintervju och jag har intervjuat fem musiklärare verksamma på högstadiet. Ur undersökningens resultat och analys framgår det att det i stora drag finns fyra orsaker till en potentiell alienering: viljan att lära känna eleverna, betygssystemet och kursmålen, de skriftliga omdömena och arbetsbördan.

The negative trend of newspapers reading gives the owner of several paper manufacturingcompanies in the West worries. Producers should be more concern to strengthen their marketpositions in order to maintain profitability in the paper mills. Holmen Paper is a medium sizedpaper mill company with all of their production in Europe. Sales are mainly made to printingcompanies operating in European countries. In order to strengthen their economic strengthHolmen Paper needs to increase the market share in markets where they have the greatestprofit margins.

Syftet är att undersöka myndigheterna polisen och brottsofferjourens uppfattningar om det oprovocerade ungdomsvåldets orsaker. Frågorna är: Vad har Polisen och Brottsofferjouren för uppfattningar om orsakerna till det oprovocerade ungdomsvåldet? Hur rimliga är uppfattningarna? En kvinna på Brottsofferjouren, och en manlig polis intervjuades. Kurirens artikelserie 2005 beskriver det oprovocerade ungdomsrelaterade gatuvåldet under några månader hösten 2005 i Luleå. CW Mills regler/ konformitet, och Durkheims socialt/ strukturellt/moraliskt tvång tas upp.

The forest industry is one of the most important industry branches in Sweden. Since the demand of high precision wood deliveries has increased, the demand on a well constructed forest road net also has increased. A good road net gives the wood-supplier competition advantages and also increases its service level towards its customers, lumber-mills and pulp-mills. In some parts of Norrbotten, the road net is still insufficient and not yet built out enough, and that is why it is important to know how to act and where to improve the road net in these areas. The purpose of this thesis was to create a work-model for long term road planning in areas with no road net or a not yet complete road net. The model has been created in an ArcGis environment, where a long chain of tools has been tied together with the program ?Model builder?.

This report concerns the for Sweden foreign tree species hybrid larch, hybrid aspen and poplar, and focuses on the area Kalmar and Mönsterås municipalities. The report shows that there are not only advantages with these species. The larch, the most common of the alien tree species has the greatest problems due to that its timber is difficult to sell in the area but also the Larch´s poor pulp quality and is more likely to be damaged by wildlife than the spruce is. Hybrid Aspen is much easier to sell and is used like regular aspen for match wood and textile pulp. Its disadvantage is the high cost for plants and to prevent damage from wildlife.

Uppsatsen består av en textanalys av 10 Mills&Boon Harlequinromaner som med ett kultursociologiskt perspektiv lyfter fram den process hjältinnan i Harlequinromanen genomför då hon i böckerna förändras från att vara en vanlig kvinna (Everywoman) till att bli en idealkvinna (Idealwoman. Studien inleds med en presentation av förlaget Harlequin Mills&Boon samt en enkel introduktion av romanens uppbyggnad och handling. Vidare följer en tillbakablick på tidigare forskning kring populärkulturen i allmänhet och kärleksromaner i synnerhet. Den teoretiska utgångspunkten finns i Pierre Bourdieus teorier kring habitus, fält och kapital. Analysen delar upp hjältinnans process i fyra delar: Everywoman, Avkodning, Kapitalhöjning och Idealwoman.

People of the modern world consume more than they ever used to do. Because of the close correlation between consumption and the amount of waste, the waste volume is also expected to increase. The purpose of this study is to examine if some measures in the recycling process from Sweden could be implemented in Indonesia. In fact, Indonesia is one of the countries in which the waste management system is struggling. Tetra Pak, one of the world leading producer of food packaging, is studied in this report.