Every year, KTH participates in the Shell Eco Marathon, a competition whose goal is to design a vehicle that can go as far as possible using only the equivalent energy of one liter of petrol fuel. This year, one of KTH?s contributions to this race is the Agilis prototype; a car powered by a uniquely configured HCCI-engine developed at the university. The engine is dependent of several subsystems in order to work properly, among other, systems for cooling and lubrication.Combustion engines are in need of a cooling system that reduces the heat developed during the combustion. In general, two main types of cooling systems are employed; either air cooling, where the outside of the cylinder is exposed to a flow of the surrounding air, ore water cooling, where water flows in tubes around the engine, and the heat are transferred by the water to the surrounding air through a heat exchanger.The purpose of the lubrication system is to prevent the friction that builds up in the interference between moving parts in the engine.

To be able to move around without having to think about each movement is for most people amatter of course. Todays society contributes to a life at high speed where the sparetime is oftenspend doing somekind of sport, even extreme sports which earlier only a few people wheredoing. This leads to not only good health effects but also to more injuries. One of the mostcommon injuries is the knee injury.Capio Artro Clinic is a clinic specialized in sports medicine and particulary patients with injuriesin knee, shoulder, foot, hip or elbow. They perform a great part of all the crucial ligamentsurgeries in Sweden and has therefor also a lot of patients in need for rehabilitation of the knee.During the rehabilitation the load of the injuried knee is increased in steps.

In several cases, systems that have been developed have been very time consuming and cost a lot of money, but they still do not fulfil the users requirements and requests. To make new systems better, you have to find a way to communicate that allows the developers to understand the needs of the user. The aim for our thesis is to highlight the importance of communication in system development. To investigate this we have choosen to do a study of the real-estate system. The work methods that have been used include mock-ups and informal conversations with the user, who is employed by the Church of Sweden in Ronneby.

The Egyptian religion viewed the whole world as divine and inhabited by both gods and men. Concepts such as death was therefore explained through myths. The ancient society feared death but desired an eternal life. The Egyptians saw death as a physical dismemberment of the body as had happened in the myth of Osiris when death was first introduced to the world. Osiris functioned as a prototype for all men as he had overcome death by finding a new existence in the netherworld.

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the unloading at road-site was studied. The goal was to describe the differences in time consumption between unloading two-sided or single-sided (only from side of the road) and also the difference between unloading with three and four assortments in the carrier.

MYDATA automation AB is one of the leading companies in development of surface-mountingtechnology and stencil free solder paste applications. MYDATA?s MY500 is a jet printerdesigned for solder paste application on printed circuit boards. The jet printer contains a cassettewhich consists of a holder and a cartridge. There is also a calibration unit which monitors andcalibrates the application of solder paste.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and skills of each field is better utilized.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

Students at the School of Engineering at Jönköping University have on behalf of the swimming organization ?Nässjö Sim och Livräddningssällskap? conducted research on how to monitor and evaluate swimmers and swimming groups in a simple and efficient manner with a focus on usability and user friendliness. Since no system existed that could meet these requirements, the client had a desire to tailor and develop such a system. The purpose of this work was to develop a system that would work as a tool to be used by coaches and swimmers alike and allow them to eventually follow the development of swimmers and swimming groups. The organization also wanted to have the ability to create tests and exams, both for land and water training, register these in the system and in a structured way know which swimmers took and passed these.For this thesis, the following questions functioned as a framework for progress.UsabilityHow to design a usable system and what is required?SystemWhat type of system is best suited to meet the client's requirements and preferences?Competition resultsHow can one retrieve all the competition results for swimmers of Nässjö SLS?DatabaseWhat type of database is best suited to easily share data with an external existing database?Usability has been the main focus throughout the project.

The task was to design and manufacture a submersible displacement pump working with the wobble plate principle. The main task for the Wobble plate pump is to be used as a sewage pump for smaller households or dewatering pump in environments where small flows and high pressures are acquired. For these purposes ITT Flygt sell a screw pump, PC-Grinder 3068. The hydraulic part of the PC-Grinder is manufactured by a subcontractor. Therefore ITT Flygt wants to evaluate an alternative to their screwpump PC-Grinder, which can be entirely manufactured by them self.

Workplace accidents in Sweden have in recent years increased. Companies are at the same time putting a greater emphasis on preventing accidents and inform about safety and risks. Therefore there is a need to know how to visualize this safety information. This study is based on a part of a project proposed by the industrial company AB Wahlquists Verkstäder, in which they want to visualize their safety information for new employees and existing staff, and also for temporary contractors and apprentices. The purpose of this study is to see what is required of the visualization of safety information and what guidelines that should be followed.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

Denna kandidatuppsats behandlar ämnet reklam i termer av standardisering och lokalanpassning. Avsikten har varit att ta reda på hur Oriflame Cosmetics har valt att standardisera eller lokalanpassa sin reklam inom regionen EMEA (Europa, Mellanöstern och Afrika), samt i vilken utsträckning Oriflames lokala representanter kan medverka i denna process. Fokus har legat på katalogutformningen då detta är Oriflame Cosmetics huvudsakliga tryckta material.Den forskning som presenteras rör särskilt prototypstandardisering (Prototype Standardisation) och schablonstandardisering (Pattern Standardisation) av reklam. Forskare visar också på hur fokus har skiftat från att skilja på fullständig lokalanpassning och fullständig standardisering, till att istället behandla regional standardisering samt vilken roll lokala representanter har i denna process och relationen mellan huvudkontor och dotterbolag.Undersökningen baseras på intervjuer med anställda inom Oriflame som har god insyn i företaget och katalogutvecklingen, samt på sekundärdata inhämtat från finansiella rapporter och dagspress. De huvudsakliga frågorna berörde hur processen för katalogutformandet ser ut samt hur lokala representanter medverkar i denna.De resultat och slutsatser som undersökningen visar på är att Oriflame Cosmetics har en tydlig regional ansvarsfördelning vid katalogutformandet.

While the technological infrastructure that enables collaboration between municipalities, counties and private health care providers improves, so does the need for health-care providers to gain access to the right patient journal at the right time. For doctors, nurses and other health-care organization employees this goal is achieved by NPÖ, National Patient Summary. NPÖ effectively enables health-care records to be shared across organizational boundaries. This thesis is based on a demand by a mobile application that can give district nurses access to health-care records wherever they are.This thesis describes the development of a prototype of a mobile application aimed for NPÖ. This includes investigating a suitable mobile platform, investigating available card readers for reading electronic identification from SITHS cards and the ability to connect to external services such as NPÖ.