Sök:

Sökresultat:

440 Uppsatser om Prototype Maker - Sida 23 av 30

Validation of a tetraplex assay for detection of antibodies in poultry serum using Luminex 200 platform.

Background: As a part of a national health control program, Statens VeterinärmedicinskaAnstalt performs diagnostics to screen flocks for certain pathogens causing high mortality,morbidity and/or serious economical losses. There are several viruses in the programincluding IBDV (infectious bursal disease virus), IBV (infectious bronchitis virus) and NDV(Newcastle disease virus). Method: 96 serum samples were collected from different poultryflocks in Sweden and analyzed by ELISA, which are currently used in the health controlprogram as well as by a commercial prototype of a multiplex immunoassay manufactured byLuminex Corp., which is currently under evaluation at the United States Department ofAgriculture USDA. This 4-plex assay detects antibodies for the three above-mentionedviruses as well as antibodies of avian reovirus. In the context of this study the ELISAs run inroutine diagnostics as well as a REO ELISA were used as the standard for comparison.Result: The antibody concentration in serum from vaccinated chickens was high while theantibody concentration level in serum from not vaccinated chickens was low.

Friskvård : Ett sätt att förebygga ohälsa

During the autumn of 2007 I carried out an investigation within the bank and finance Sector. The aim of the investigation was to see how informal aspects could be understood in relation to equality within Bank AB? The main question was: Which are the obstacles and opportunities for equality within Bank AB? To answer the main question I asked the following questions to the material: Are there any gender related different within the organization? How are men and women represented within the internal magazine? Which are the conceptions related to sex/gender within the organization? The investigation is based on a survey, the internal magazine was investigated and finally interviews took place. Throughout the investigation I used organization theory in a gender perspective. With the gender organization theory I examined concepts as structures, leadership, symbolism and changes associated with equality.

TOLKNING MED METAFORER : En uppsats om lagtolkning och avtalstolkning i ljuset av den konceptuella metaforen och den kognitiva semantiken

This master thesis concerns the relation between law and the theory of the conceptual metaphor which has developed within cognitive linguistics. Although its main focus is abstract thinking, it also covers a wide range of aspects within cognitive linguistics, such as the prototype theory and radial categories. In order to address this relation, three questions will be dealt with. Firstly, does the theory of the conceptual metaphor have relevance to interpretation of legal rules and contracts? Secondly, can the same theory explain why a legal rule or a contractual term has been interpreted outside of its most given area of application? Thirdly, when an interpretation is not predictable from a legal viewpoint, can such an explanation answer to that fact? Answering the first question will require a descriptive analysis of the conceptual metaphor and cognitive linguistics.

Rökgaskondensering och skrubber till vedeldade villapannor :

This paper deals with the opportunities for the technique of condensation, for wood fired household heaters, on the Swedish market. In this project the condenser is preceded by a scrubber and both energy exchange and separation of unburnt particles have been studied. The facility studied is connected to a wood stove at 30 kW. The tests would show that the effect from the stove never reached above 16 kW. This might be a result of the low temperature of the water going into the stove, from the condenser. In addition to this the wood was not of highest quality and the stove could have needed some maintenance before the tests.

Konstruktion och design av arbetsplats - för kablagemontör

This degree project has been performed with Mega Teknik AB in Landskrona. The project has resulted in a workplace for the cable installers of Mega Teknik. The workplace contains a workbench and a cart.The first stage in this project was to make an analysis of the current workplace to identify the needs the installers had.The different principle construction proposals of how the workbench would look like and which functions it would have was made during brainstorming, in groups and alone. These proposals were compared against each other using a functional analysis that has been put up to get the principle construction that fulfilled most points in this analysis.The proposal chose for further work was a cart and a bench with a module intends, the table got a formulation that creates a better reach for the installers.This proposal was generated in Catia V5 to get a better overview of the suggested proposal.During the primary structure phase drawings over all the products were made and the components were chosen. Calculations were made and the product got the dimension required.

Design av en mobil arbetsterminal för röntgenavdelningar

In healthcare settings, administrative routines have been made more efficientthrough digitalization of information and the introduction of stationary computers.This situation is especially true when it comes to radiology, where pictures,referrals and patient information now is completely managed by advanced stationarycomputer systems. However, studies have shown that these rationalizationsdo not support flexible and mobile work routines.PocketRIS is a prototype illustrating a mobile terminal for radiology that hasbeen designed to simplify workflow and reduce the cognitive workload of healthcarepersonnel. PocketRIS includes a visualization of the clinicians work situationincluding a personal referral list that can make the user attentive of importantevents.Contextual Design has been used to elicit the basic system requirements for thesystem; 19 contextual inquires was conducted with physicians, nurses and assistantnurses at two different radiology clinics in Sweden during six days. The purposeof the study was also to identify the groups that have the greatest need for amobile terminal. The study was concerned with design and evaluation of differentsolutions with healthcare personnel.The result shows that physicians and assistant nurses have the greatest need ofa mobile terminal.

Förbättring av väggfäste för flatscreens

The project was carried out in cooperation with the department of product development IOS at IKEA. The work included improvements of a new existing product that Ikea soon will release on the market, Observatör, a wall bracket for flat screens. The product is supposed to fulfil the needs within this market for IKEA. However, since Ikea was not satisfied with it, our work was to carry out the improvements that were specified in the beginning of the project. Another task in the project was to develop a side-product that is supposed to be used together with Obeservatör for storage of DVD/decoders.The project included labour as problem definition to final technical drawings and a prototype.

Flödesmätning i vattenkraftverk : Studie av alternativa mätmetoder

Flow measurement is one of the greatest challenges in order to calculate efficiency in hydropower. Most hydropower plants in Sweden use differential pressure methods for flow measurement. These methods are dependent on constant conditions in the waterways. A change in these conditions, like turbine improvements, prevents differential pressure methods to verify efficiency improvements. Since efficiency improvements can?t be verified by one measurement system, another method, which isn?t affected by changing conditions, can be used.

Tillverkningsanpassning av produkt för kostnadsreducering : Nya tillverkningsmetoder och verktygsparametrar

This thesis describes redesign and adaption of a products housing. In order to make it more economical to produce at a lower production volume. The thesis is based upon a prototype that a previous student developed for injection moulding. The goal is to find alternative manufacturing methods, but also to identify parameters that affect the cost of the injection moulding tool.The housing must be tough in order to protect the circuit board inside. But at the same time it must allow sound, light an electrical communication to pass through.

Ett informativt och förberedande program utvecklat i samverkan med Barnöverviktsenheten på Mas i Malmö

This report is the outcome of an exam work made in interaction design, bachelor degree, at the School of Arts and Communication, Malmö University. Working in collaboration with the childhood obesity unit, Region Skåne, our aim was to fulfill their request of a web based application preparing the children for treatment at their facility. Furthermore the application intends to give the children knowledge concerning obesity as well as teaching them how to obtain a healthier lifestyle in terms of provision and activities. The application concerns children in different ages and therefore different stages of their learning abilities. Our conclusions are that they need to be challenged and obtain feedback in different ways to get motivated.

Styrning av grafisk färgdisplay

This master thesis is a result of the work carried out for Research Electronics at Siljansnäs. The company develops customized electronical systems. Because of the rapidly increasing interest in colour displays there has been a desire within the company to represent information from sensors and electrical systems in a more advanced way.Due to the mentioned reason above we were given the assignment to solve how a colour display using the STN technique works. The technique is used by small displays, the size of QVGA. Our ambition of this diploma work is to develop a fully functionally test prototype to evaluate the LCD (Liquid Crystal Display) and the LCD controller.

Navigera rätt med användaren : Användarinvolvering inom produktutveckling

This Master Thesis has been carried out in cooperation with Silva Sweden AB. A companywhich manufactures products like compasses, pedometers, headlamps, hiking poles and otherequipment for the out door life and navigation. The purpose of the project has been toassemble methods and models which support user involvement in Silva?s design process.Thus, to increase the number of products with purchasing power, enhance product quality aswell as increase foundation for new product ideas.The focus through out the project has been to assemble a pallet with methods for userinvolvement and from this select a few methods that will fit the company. The purpose of thepallet is to be accessible for the company during their work of change with the design processthat has been going on and will be in the future.

Effektiv provningsmetodik för växelföringsdamasker

Completed durability testing of gearshift gaiters at Kongsberg Automotive in Mullsjö, is sometimes leading to discussions regarding whether or not a gaiter is supposed to be a pass or a fail. That is because the current pass/fail-criterion are a bit vague. A durability test takes around 4-5 weeks to complete which is a long time if the tested material does not pass the test and a new material has to be tested instead. Stricter pass/fail-criterions and a faster testing method for the materials are therefore desired.In order to develop a durable pass/fail criteria, seven already judged gaiters were chosen. Every one of the gaiters was put through detailed analysis, after which there were a new assessment of the gaiters.

Utveckling av en universell laddare

Syftet med examensarbetet har varit att undersöka möjligheterna att utveckla, producera och lansera en ny universell laddare. Målet har varit att kunna ladda så många modeller av så många produkter som möjligt, vilket innefattar mobiltelefoner, kameror, datorer och MP3-spelare etc. Arbetet skulle leda fram till ett förslag på produkt.Genom att undersöka befintliga patent och produkter, har marknaden granskats och slutsatsen är att det finns en uppsjö av universella laddare på marknaden. Dock finns det få produkter som inger säkerhet, möjliggör multipel laddning och som är stationära. Dessa egenskaper blev grundstenar i den kravspecifikation som utarbetades.

Tidsmaskinen

!is began as a product design challenge, which stipulated broadlythat the designer be ?inspired by a subject?, whose ideas would leaddown a path of product idea evolution. From there, the goals forthe end-product would undergo rigorous revisions, re-de#nitionand re#nement. !e end-product itself would be the result of anentire thinking process.!e subject I have chosen is: Time. I want to challenge and evenalter our conventional sense of time, using principles ofdesign.

<- Föregående sida 23 Nästa sida ->