Introduction: Urinary retention is a common postoperative complication associated with bladder distension. Permanent damage to the bladder affects the patient?s quality of life and may lead to a lifelong inability to empty the bladder and needs of self-catheterization with the risk of urinary tract infection. Bladder distension was classified as the fourth largest health care related injury in Sweden in 2013. Bladder distension may occur before the operation starts and is more common among orthopedic patients.

Introduction: The interaction between different care facilities and professions is important in the care of older patients. Patients do not always get enough time to recover and often have a continued need for care. A discharge process of good structure in which the patient and relatives are participating and the continued need of care is assured is of importance in care of older patients.Objective: The overall purpose of this study is to compare the discharge process for patients over 75 years old admitted to a emergency medicine ward respective a emergency medicine ward with geriatric focus at a medicine clinic, to compare discharge process between these wards and evaluate the patients situation at home after discharge.Methods: A survey of medical records with a protocol and a telephone survey have been performed. Data was analyzed with descriptive and analytic statistic. Patients at the medical wards MAVA and care unit number 21/34, which are 75 years or older and are discharged to their own home, within the municipality of Göteborgs stad, in Sweden, are included in this study.Results: The discharge process differed between medicine wards with emergency medicine and geriatric focus.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Swedish Trotting association was formed in 1925. They are the ones who design the regulations concerning what is permissible and not permissible for the horse, driver and trainer, when they have a license at a Swedish racing track. The Veterinary department of Swedish Trotting association decides in consultation with representatives from veterinaries around the country what is allowed and not allowed, based proven experience, combined with the availability of scientific data and Veterinary Department's own assessment. After stricter regulations for good animal welfare from the Swedish government, Swedish Trotting association is going to work out a workable model for how new equipment can be tested in the future to see how the equipment affects the horse. In the future, all equipment will be objectively tested before approved. The purpose of this work was to develop a well-functioning model for this. The research-question for this work is: Is this study design a well-functioning model of how the equipment should be tested in the future? The equipment used for designing this model was bitless bridle with a bit.

Föreliggande studie tillämpar diskursanalys i syfte att förstå var det råder samstämmighet eller konflikt kring huruvida Sverige ska sälja, spara eller annullera överskottet på utsläppsrätter inom EU:s och FN:s utsläppshandel. Genom kritisk diskursanalys har vi kategoriserat och kodat tio riksdagsdebatter mellan åren 2010 och 2014, i vilka en ekologisk diskurs och en ekonomisk diskurs kämpar om tolkningsföreträde. Bortsett från samstämmigheten att handel med utsläppsrätter ? vilken kan ses som ekologisk modernisering ? är ett viktigt verktyg för att minska klimatförändringar; råder öppen kamp kring hur ett överskott på utsläppsrätter ska hanteras. Kampen har delats in i sju kategorier baserat på huruvida: 1) ett beslut om annullering kan tas direkt eller om det krävs en utredning först, 2) en annullering är en symbolisk handling eller styrs av marknadens logik, 3) en försäljning leder till ökade utsläpp, 4) på vilket sätt överskottet ska fungera som förhandlingsstrategi under klimatmöten, 5) Sverige förlorar sitt klimatanseende vid en försäljning av överskott på utsläppsrätter, 6) utsläppshandeln i högre grad borde styras av politiker eller marknadsmekanismer, och slutligen 7) huruvida överskott på utsläppsrätter bör ses som ett lyxproblem.

The aim of this thesis is to create an understanding of the incentives for forest companies to invest in reducing carbon dioxide emissions from deforestation and forest degradation, which is termed REDD. The Brazilian Amazonas was chosen as the base for the investment case. Brazil has the largest area of rainforest in the world, and also the biggest problem with deforestation. The Amazon region of Brazil comprises rainforest which is largely intact and unexploited. Accordingly, there is significant potential scope for prospective investments in a REDD-project, and so have a noteworthy impact in preventing deforestation.The research approach used the United Nation?s Clean Development Mechanism concept was used as a framework for ascertaining the investment costs in potential REDD-projects.

Shock absorber units play a key role in establishing the driving dynamics and performance of automobiles. Öhlins Racing has manufactured high-tech automotive shock absorbers for over 30 years. Öhlins Racing?s advanced technology has contributed to over 200 world championships in automobile racing. Öhlin?s manufacturing process has long utilized automated fluid filling equipment during the final shock absorber unit assembly stage. The filling process consists of vacuum pumping the shock absorber unit and subsequent transfer of fluid. Vacuum pumping is necessary to remove residual air from the shock absorber unit prior to initiating the liquid filling stage. The presence of undesirable gases drastically compromises the performance of a shock absorber. The filling degree, defined as the final ratio of air to oil, is determined by the specific filling protocol as well as the specific equipment utilized.The current investigation aims to develop a viable technique to accurately determine residual air content in shock absorber units. If the filling degree can be appropriately quantified for a specific manufacturing process, then the air/oil ratio may be quantitatively related to shock absorber performance. The utilized measurement method must be completely integrated into the manufacturing process to guarantee shock absorber performance specifications according to the manufacturer?s standards. By utilizing the measurement method developed in this work, the manufacturing process, manufacturing equipment and product specifications can all be tailored to provide improved filling conditions.The developed measurement method provides accurate quantification of the filling degree under a wide range of processing conditions. The method establishes the relative quantity of air in the shock absorber unit by performing in-situ compressibility tests. The fill ratio can be controlled and varied by manipulating the vacuum pressure exerted during the filling process. Performance tests, however, indicate no correlation between filling degree and unit performance..

This dissertation is done as a preparatory step for the action plan of environmental protection shall issue to preserve the Phytoecia nigricornis in the country when it is red-listed and classified as vulnerable (VU). My task was to investigate the prevalence of the Phytoecia nigricornis in Halland County. They wanted to see if it existed in Halland (Ehnström, 1999). If it did not exist they wanted to know how to improve its habitat.the Phytoecia nigricornis is difficult to inventory because when it is larvae it lives in the roots and lower parts of the trunk of the Solidago Virgaurea plant and the adult beetles only keeps to Solidago Virgaurea by mating and egg laying and larval caterpillars when they hatch (Bily, 1989; Molander, 1999). Often it is overlooked or missed, and one question was whether it existed  in the whole country or only in those parts where it was previously found in, Skåne, Blekinge and Östergötland (Ehnström, 1999).One problem for the Phytoecia nigricornis is that their habitats is declining.

An increased awareness about the global warming has created a demand for more information on how the climate is affected by different activities.This master thesis was initiated by Tricorona, a Swedish company that offers its customers analysis and calculation of their climate impact. Tricorona also supplies climate neutralisation with CERs, in accordance with the Kyoto protocol and controlled by the UN. This work demands updated emission factors for greenhouse gases. An emission factor gives information about the greenhouse gasintensity of a service or a product [kg CO2-eq./ functional unit].The purpose of this thesis is to examine how electricity, district heating, hotels, taxis, food and materials affect the climate and how emission factors for these areas can be calculated.This was done by reviewing and comparing different studies and by interviewing experts. The information was evaluated and recommendations on calculations and emission factors were made.The consumption of energy is the main source of greenhouse gas emissions for district heating, electricity, hotels, taxis and materials.

Abstract Background: In 1997 the Kyoto Protocol was signed, it?s an international agreement which is aimed to reduce greenhouse gas emissions. Sweden's goal is to reduce energy using in buildings with 20 percent by 2020 and 50 percent by 2050. This is a comparison with levels from 1995 (Glad, 2006). For Sweden to be able to reach its goals, they need to construct more low-energy buildings (Åhman, Wahlström & Lundblad, 2010).

Hypertrophic cardiomyopathy (HCM) is the most common heart disease in cats. Maine coon is one of the breeds where the disease is overrepresented. Studies have shown that HCM is inherited as an autosomal dominant trait in Maine Coon cats. This finding has led to cardiac screening using ultrasound in the breed. The results of the screening are used in a national breeding program constructed to reduce the spread and incidence of HCM in Maine Coon cats.

This paper is a study and comparison between the two Wireless LAN (WLAN) standards HiperLAN/2 and IEEE 802.11a. WLANs are used instead or together with ordinary LANs to increase mobility in for example an office. HiperLAN/2 is an European standard developed by ETSI and the IEEEs standard is American. A WLAN-card consists roughly of a Medium Access Control (MAC), Physichal layer (PHY) and an antenna. The antenna is the same for the different standards.

Social work is a profession where documentation about people?s behavior and life circumstances is common. In the beginning of the essay we ask ourselves, if these descriptions about people can be problematic? To explore this, we studied social documentation, from the past. We used a historical source because history can help usunderstand the social work that is being conducted today.

The idea for this project was initiated together with one of the leaders in the forest, paper and packaging industry. To get through an A/R CDM process the company is exposed to the risk of failing the process or that the overall costs will exceed the benefits of the project. This would delete the incentives to invest in GHG removals compared to purchasing emission allowances on the carbon market. The questions that have been raised and needs clarification in the thesis are the following:? From a company perspective, what are the incentives for implementing Forest Clean Development Mechanism (CDM) projects?? What is a likely financial outcome of a reforestation CDM project on degraded land in the Guangxi province of the Peoples Republic of China?? When does an investment like this break even with the cost of buying market based carbon emission allowances? The objective of this master thesis is to carry out a research about the incentives for forest, paper and packaging companies to invest in reforestation through the clean development mechanism.

Dental implants that are integrated into the jaw bones are widely used to replace lost teeth in human beings. Tooth-loss is often related to loss of the surrounding alveolar bone. This can make implant placement difficult and a bone substituting material may be required. The standard method is to use a bone graft harvested from the patient which requires additional surgery than that needed for implant placement. Limitations in the amount of bone that can be harvested also pose a problem.