This thesis work has been performed at the Division of Assembly Technology at Linköping University for a period of ten weeks. The work is part of the project ProFlexA, which is a research project in collaboration between Linköping University, Lund University, and industrial partners such as Combi Wear Parts and Smålands Stålgjuteri AB.The casting process creates random incurred burrs and defects, which must be removed during a cleaning process to make sure that the cast can be sold. Automation has long been sought for the cleaning of castings due to, among other things, poor working conditions for staff, but this has proved difficult to implement with today's technology. Automation has for some time been available for more capital strong companies with large annual volumes, but for smaller companies with small-and medium-sized volumes, automation has not been an option.The goal of ProFlexA is to develop an automated cleaning cell aimed at small-and medium-sized volumes.The goal of the thesis is to do a pre study at ProFlexA?s partners on cleaning of castings, and develop concepts for automated cleaning of castings.By recording the process and cycle times, the cleaning of castings has been documented as it works today, and on this basis, information and statistics has been compiled.

Vi har gjort en analys av Volvo Construction Equipment AB: s (Volvo CE) instruktionsböcker på avdelningen Customer Support Division (CST) i Eskilstuna. CST är det bolag som stödjer Volvo CE med bland annat reservdelar, marknadsinformation och teknisk dokumentation. I analysen ingår en undersökning om hur instruktionsböckerna uppfattas av användarna. I uppsatsen undersöker vi om instruktionsböckerna har god kommunikations- och informationsdesign. Vår fokus har legat på användarperspektivet där vi har undersökt hur användarna uppfattar informationen samt på hur utformningen av Volvo CE: s instruktionsböcker fungerar.

Visualization plays a key role in the concept of Lean. Lean was developed in Japan as a business philosophy in order to lead to an activity, where only steps that contribute to customer value of the final product are being performed. By defining the customer value and establish visualized standards, it is possible to see when situations differ from the standard. Then it?s possible to lead the process back on track.

Samtliga av Norrbottens vårdcentraler har länge haft problem i form av underbemanning av läkare. Landstinget har mött det problemet genom att använda sig av bemanningsföretagsanställda stafettläkare. Vårdcentralernas beroende av stafettläkare skildrades i denna studie ur arbetsgruppens perspektiv. Inom socialpsykologin finns ett flertal modeller för hur bland annat arbetsgrupper fungerar, utvecklas och påverkas. Faktorer som kontinuitet, målinriktning och ledarskap är alla begrepp som kan sägas påverka grupperna.

Detta examensarbete har utförts på uppdrag av H&M Mail Order Division i Borås, somansvarar för postorderverksamheten inom H&M AB. I juni 2007 öppnade man ett nyttcentrallager i Poznan, Polen som förser distributionslagret i Borås med varor. Övergången harinte varit smärtfri, och man dras med problem som leder till merarbete och ökade kostnader iBorås. Syftet med examensarbetet är därmed att kartlägga material- och informationsflödetmellan Borås och Poznan, för att identifiera de problem som skapats samt att geförbättringsförslag. Arbetet avgränsas till att undersöka vilka interna faktorer som påverkarflödet i de båda lagren, och uppsatsen kommer inte att beskriva hur olika förbättringsförslagska implementeras.För att få en inblick i problematiken användes olika metoder.

There have been significant changes in the agricultural sector during the past 20 years (Jordbruksverket, 2008). The development of today is towards deregulation and adaption to global market conditions. As farmers try to adapt to the changed and more competitive market conditions investments are often necessary (LRF Konsult et al, 2012). Loans to agriculture and forestry businesses have increased to record levels and debt has doubled over the past years. The financial turbulence of the past years has contributed to an increase of the meaningfulness and willingness of the banks to be able to understand and handle risks associated with agriculture and forestry (Breiding, 2010).

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Urban trees have very little in common with trees on natural sites, such as forests or pastures. Trees in urban environments are often planted in packed soil and in small volumes. This can lead to decreased availability of water and oxygen, as well as deteriorated ability for the soil to store nutritional elements. Also above ground the tree usually have limited space in cities. Regulations on free height over roads and cycle tracks demands high stems at an early stage of their development.

The high level of competition and the rapidly growing technology development has created new challenges for today's businesses where they are forced to deliver more customized products at a lower price and a shorter time period. This places high demands on the companies' ability to design and develop better products in a more efficient way. In addition to developing products, the design process focuses on securing long-term success for the company by developing nourishing skills. However, to achieve an effective design process the companies must improve their ability to plan as well as use their knowledge base in a more efficient manner. Toyota's product development system is a critical component for companies to address challenges that they?re facing and offers a great potential to create significant competitive advantages.

With a larger awareness of the climate changes and increasing electricity prices, energy efficiency measures in the industry have become more common. By rationalize the activity and by the same time decrease the emission of greenhouse gases the company can both save money and reduce negative environmental impact. For the Swedish industries the electricity price have traditional been relative low, which has resulted in a considerable larger usage than other European countries. By a deregulation of the European electricity market the electricity price will level off between the countries, which will cause a higher electricity price in Sweden than we are use to. To prevent that the Swedish industry don?t lose competitiveness against the other European countries, it will require energy efficiency activities in all different forms.ABB Sweden has decided to decrease their total energy usage with five percent in two years.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

Biodiversity consists of all life on Earth and in all forms. Biodiversity is often discussed at three levels: ecosystem, species and genetic variation within species. Biodiversity also provides many of the ecosystem services performed by nature and that we depend on, including cultural services such as aesthetic values, education and recreation. In Sweden the environmental objectives are central; there are 16 environmental quality objectives, and "A rich plant and animal life" is one of them. Conservation and sustainable use of biological diversity is a prerequisite for achieving also most other environmental objectives. Another environmental quality objective that is tied to a rich biodiversity in cities and biodiversity is "Good built environment" where cities, towns and other built environment should provide a good living habitat and contribute to a good environment.

Title:"All the news that´s fit to print": A quantitative content analysis of The New York Times and Dagens Nyheters front pages on the basis of tabloidization theory.Authors: Pär Brolin & Kristoffer OlofssonAim: We intend to distinguish elements of tabloidization in two daily newspapers as an effect to the increased economic and public orientated business models. The New York Times and Dagens Nyheter has been chosen mainly because they operates within different national media markets, secondly they are well known for their high journalistic standard. Based on the upcoming result, it's in our concern to illuminate these possible changes effect on the overall journalistic quality and discuss its importance. We aim to reveal the actual state of tabloidization in the two high quality newspapers The New York Times and Dagens Nyheter and thus answer the following questions:- In which way are the elements of tabloidization shown in The New York Times and Dagens Nyheter in a contemporary context as well under a twelve years period?- Based on the achieved results, what are the main differences between the two examined newspapers and what potential impact could it have on the journalistic quality?Method/Material: In order to perform this study, we have executed a quantitative study built on content analysis of the two newspapers front pages.

High quality within a Lean production system begins with standardised work, which creates stable processes able to generate predictable output. If nonconformity from the standard procedures occurs, routines are needed to analyse, correct and prevent the nonconformity from occurring again. In that way, the nonconformity can be a trigger for continuous improvements toward more stable processes. In takted production lines, where the operator follows a standard sequence with tasks set to be completed within the takt time, a nonconformity leads to downtime in the operator?s sequence, and no value is added.

 AbstractMedia has since a long time back been writing about extensive thievery of recreational boats and their engines. The value of the stolen goods is estimated to several hundreds of million Swedish crowns per year. The widespread stealing creates a secondary market where boats sometimes are sold by sellers that do not have the rights to sell the boat. This creates risk for the buyer who most often is a private person. A situation the buyer can face is that the boat was stolen and that the original owner can demand to get the boat or engine back.