BackgroundToday a common approach to solve a complicated problem is to assemble a temporary workforce in order to solve the problem by working together within a project. One of the difficulties with working in projects is to maintain the planned budget. Working hours and costs are often exceeded. Many companies presume that any certain project will succeed, a presumption that leads companies not to anticipate risks involved in a project. In companies today there is seldom time for evaluation or moderation of a project, in order to have time for evaluation there is a great need for an adequate planning of the project.IntentThe intention with this study is to create a model for planning, budgeting and evaluation of projects within consultancy companies.MethodWith the help of interviews and discussions within the group Hamnar och Byggkonstruktioner at Sweco has evidence to present a proposal on planning, budgeting and monitoring been developed.ResultsA model has been developed to ease for consultancy companies to plan, budget, monitor and evaluate projects.

Projects is the most common work model within the cultural area, but what is a cultural project? The definition of cultural projects is ambiguous. There are also no compiled information about what it means for culture to be pursued in project form. Scientific research about traditional project management and success criterias are wide-ranging. So is the scientific research about cultural studies and cultural policy.

How do you reed a book? Do you start at the beginning,or do you begin with the end or maybe in the middle? Inmy exam project I elected to work with a photographicpublication about fragments of pictures combined in differentways, changing the context of the photographs andmaking the reader search for the whole picture, literary.During the project I tried to create a method for foldingwhich would make the pictures communicate differentlydepending on how they where stacked against each other.I wanted to explore new ways to read the photo book, andhow the format could be transformed by folding, to beable to show the pictures in a larger scale. Working withthe material from an earlier project about defragmentation,I wanted to create a book that would correspond tothis and figure out how it would work..

I did my degree project together with Universeum AB. The project had the work title: children?s world and the aim were to give children between 3-8 years old a place that was especially made for them. With their interests and needs in mind the area should trigger play but also learning through a well planned pedagogical environment.I did this project because I thought this was an excellent opportunity to really practise my new gained skills I had learned during my two years in CCD (Child Culture Design). It also gave me the opportunity to actually see how well my knowledge was working when it was put to the test, and I did learn a lot from this.Together with a crew of 6 people I developed and designed the area.

The formulation of visions into practical projects is an important part of the professional expertise of landscape architects. This expertise includes the gathering, structuring, improvement and utilization of knowledge. Project models have been developed to provide tools for the implementation and governance of projects, as well as means of learning, reflection and survey of individual projects. The aim of this thesis is to describe some general project models and their theory, and to describe practical, real-life examples of project models used within landscape architecture. Questions asked are: ? How do the processes of idea to construction in landscape architectural projects lool like? Do project models have a relevance for the mission of landscape architects? ? Is a common project model used within such projects, or is the project model varying depending on e.g.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This bachelor thesis, written as a part of the European Studies at Gothenburg University, is concerned with the European Unions? (EU) climate political governance in their both climate- and agricultural policy, and in particularly the question whether it is sustainable. This thesis intends to problematize if it is possible for the EU to continue to pursue its current agricultural policies, while at the sametime maintain its role as a sustainable actor on the global arena. The framework of theEUs? climate policy governance disciplines this analysis.

Ala sawmill in Ljusne, Hälsingland, has increased its flow through the sawing plant during the last couple of years. The problem now is the sorting plant, as this part of the mill is now slower than the rest. A close analysis of the sorting plant was therefore necessary to be able to increase the flow through. The aim of the project was to find solutions that can lessen downtime and increase flow. The goal was to increase the flow from 650 to 925 logs through the sorting plant per hour.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

This essay aims to investigate how students in upper secondary school perceive the subject religion A. The study is both qualitative and quantitative and I will use a survey to investigate the perception of religion among students both vocationally oriented and theory oriented. I will use questions concerning religious background and perception on the subject in relation to the curriculum but also try to investigate whether there are differences on perception between the vocational and theory orientation. The theoretical approach is mainly based on the curriculum concerning religion A but former research is also used such as books written by Sven G Hartman (2000), Ulf Sjödin (1995), Ove Larsson (1991), Elsie Davidsson (1989) and Anders Törnwall (1988). The result in the study is that students for the most part perceive the subject religion A as something positive and the background has a connection to their present perception.

Cellulose nanocrystals (CNC) are great candidates for composite materials. The reasons why CNCs are such attractive materials for them are due to their great mechanical properties, high aspect ratio and low density. On the other hand, hydroxyapatite (HAp) is a kind of calcium phosphate and a main component of bones and teeth. The purpose of the present study is to make oriented nano-sized composites with CNC and HAp. Although some researchers carried out to make CNC composites with HAp for biomedical materials, nano-sized and oriented ones haven?t been achieved yet.

Denna uppsats behandlar hur ett införande av SOA (Service Oriented Architecture) påverkar en organisations IT-arkitektur. IT-arkitekturen har stor betydelse för en organisation och det är viktigt att arkitekturen är anpassad efter verksamheten för att lyckas med ett införande. Syftet var således att ta fram ett ramverk innehållande faktorer som påverkar IT-arkitekturen vid ett införande av SOA, vilka problem dessa faktorer kan medföra samt förslag på åtgärder. Genom litteraturgranskning och tre kvalitativa intervjuer erhöll vi underlag för att skapa ovan nämnda ramverk. Resultatet blev ett ramverk innehållande fem dimensioner av IT-arkitektur som visar att påverkan till stor del beror på hur väl IT-arkitekturen är anpassad till verksamheten.