The aim of this study is to examine which factors in a traffic wardens? situation at work that promote and which that inhibit satisfaction at work. The aim of this study is also to examine if there are any differences in the work experiences for traffic wardens that work alone versus those who work in a team of two. The following questions are examined in the study:?Which factors promote and which factors inhibit the work situation for traffic wardens??Are there any differences between traffic wardens that work alone and those who work with another colleague?The selection consisted of eight traffic wardens, of which four of them work with another colleague while the other four work by themselves.

The aim of this study is to examine which factors in a traffic wardens? situation at work that promote and which that inhibit satisfaction at work. The aim of this study is also to examine if there are any differences in the work experiences for traffic wardens that work alone versus those who work in a team of two. The following questions are examined in the study:?Which factors promote and which factors inhibit the work situation for traffic wardens??Are there any differences between traffic wardens that work alone and those who work with another colleague?The selection consisted of eight traffic wardens, of which four of them work with another colleague while the other four work by themselves.

Huvudsyftet med detta examensarbete var att jämföra SchlumbergerSemas projektmodell PROMISE (Project Management in Sema) mot ett mindre antal projektmodeller och som en orienterande del till jämförelsen skapa en utvärderingsmetod för PROMISE projekt. Utvärderingsmetoden ges inte någon större del i detta examensarbete, förutom den skapade checklistan som utformades efter den inledande litteraturstudien. Den största delen i detta arbete består av den jämförelse som gjordes mot PROMISE. De projektmodeller som jämfördes mot PROMISE var PPS (Praktisk Projekt Styrning) som är TietoEnators projektmodell samt PQM (Project Quality Management) som är Svenska Projektfabrikens projektmodell. Jämförelsen utfördes övergripande på områdena processorientering, fas, dokumentation och organisation.

This Degree Project was about finding the best loudspeaker placement in a heavyweight truck and also the best suited loudspeaker for this task. The project took place in Södertälje, Sweden, on behalf of Scania CV AB. The goal was to create a new listening environment in a truck cabinet.The results were accomplished by the performance of a few different tasks. First a benchmark was made on Scanias top competitors. Second a listening test was made to get an apprehension of what people find lacking in the sound reproduction of the sound system.

Some people do not have the opportunity to visit a physical exhibition because of limited time or long travelling distances, it is here the need for a web-based exhibition arises.This dissertation describes the development of an interactive web-site representing a part of a physical exhibition of over 200 interviews on different peoples immigration to inner Scandinavia. The interviews contain text, audio clip, pictures and video clip.The website contains modern programming technologies such as HTML5, ASP.NET MVC3, SQL, JavaScript and jQuery.A cover of the technologies used and how the project has been designed and implemented is explained in the dissertation. In the end of the dissertation we discuss about how the result of the project follows the goals we set up in the start phase. The result of this project is an interactive and easy to use web-site showing a part of the physical exhibition online. An easy administration to insert new information and edit existing without any major computer knowledge..

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

The aim of this study was to examine how individuals with disability pension reason about a return to work. Action theory, as presented by Berglind, was used as theoretical approach. Qualitative interviews were conducted with five individuals who have disability pension due to mental illness. The respondents describe how they weigh benefits and disadvantages against each other. The main reason for a return to work is economical.

The purpose of the project has been to work out recommendations that reduce the energy-related costs and environmental impact of HPW Fresh & Dry Ltd., a fruit drying factory in Ghana. The factory produces electricity with diesel and biogas but also purchases electricity from the national electricity company. Heat for the drying process is produced from biogas, kerosene and solar panels. In the project the energy system was analyzed by measuring production and consumption of heat and electricity. The project results show that the factory can become self-sufficient on heat if the available energy is used more efficient. The production units for both electricity and heat have low efficiencies.

Current technology offers many possibilities for remotecommunication. Nevertheless, people with cognitive and communicativedisabilities have limited access to common communication technology like textmessaging via a mobile phone. This study is part of the project Text messagingwith picture symbols - a possibility for AAC users and people with cognitiveimpairments. Semi structured interviews were used to investigate three menand four women?s experiences of using Windows mobiles with adaptedfunctions for text messaging.

An increase interest of new methods and tools has begun to grow in the real estate business, this new trend causes an increase in new programs that aim to simplify processes of energy-efficiency and environmental issues.After consulting with Björn Alsmark from Bjerking AB, an architect and engineering company, we made a decision that the Degree Project is going to examine the program IES (Integrated Environmental Solutions) with some integrations from Revit Architecture application.To be able to examine IES, we got access to a completed project from Bjerking. The project is a nursery school in Uppsala. An application has been handed in from Bjerking to make this project to a Green Building-certificated project. According to Bjerking own calculations (with the energy-calculation program Enorm), the consumption of energy of the nursery school is 48 percent lesser than required by BBR.An evaluation of IES and Enorm has been made with an aim to compare these two programs and find out if IES is an appropriate program to replace Enorm. Does Enorm or IES come up to BBR´s recommendations?The Degree Project cover 15 ECT, that required several adjusting and delimitations, and the study sketch ended with a literature study.After finishing the study sketch the modeling of the nursery school began.

This report is the result of a diploma work made at IMT at US in Linköping. The purpose of this piece of work is to investigate the possibility to design a general program for data-acquisition using LabVIEW, suiting different hardwares and connections. Great importance has been attached to communication with serialport, using bluetooth, because different wireless PPG-instruments has been developed parallel to this project. These PPG-circuits uses this type of serialcommunication. Communication with USB, GPIB and analog connection has also been examined and analog communication has been tested practically.

High demands are set on all equipment used in emergency service work, where small margins can be the distinguishing factor between life and death during a rescue operation. It is important that tools such as ladders quickly and easily can be dismounted from a vehicle and still satisfy the regulatory requirements for securing loads during transport. The existing solution for getting ladders down from the roof of a fire engine requires a large manual effort from the user in an ergonomically unsound posture.In this degree project a new ladder holder is developed with focus on the user to solve the ergonomic problems and at the same time create a more compact design that can be adapted to several different types of ladders. After an initial pre-study with user-interviews and measurement of forces and distances a set of requirements was formulated that came to govern the project's direction. Creative methods were used to generate concepts that improved the function and through design solutions, calculations and testing in CAD a base for manufacturing of a new product was created.The result is a completely new type of ladder holder that minimizes the user's manual effort and simplifies the securing of ladders in the holder.

Work environment has been an important part of the Swedish working life for a long time and with the help of the Working Environment Law the work environment is mandatory. The purpose of this study was to gain a deeper insight into how the system of middle managers systematic work environment looks like. The question was: How do six middle managers perceive and deal with systematic work environment? A qualitative study was conducted with six middle managers from a global company. During the analysis, there were three main themes to be recognized (cooperation and support facilitates the work environment, problem with the systematic work and difficulties with staff) and six sub themes.

This report summarize what have been done during the Master of Science Thesis that Klas Schjelderup has written for the company RANOTOR Utvecklings AB. The company is developing modern steam engines and this work should develop a machine to perform tests on a new type of piston seal that hopefully could be used in the future. The steam engines will be both volumetric and energy compact, around 1600hp/literof cylinder volume, and it will have a lot of practical applications.The new type of piston seal is hydrostatic lubricated which means that a fluid is separating two faces that normally is in contact. In this case pressurized water is used to separate the piston seal from the cylinder wall. RANOTOR have earlier formulated that at least the expander in the modern steam engine have to be oil-free, due to other components functionality in the closed water system.

Concept - detail - buildingStockholm International Fairs, new main entrance I studied at the KTH School of Architecture from 1995 to 2000. After completing my studies I wanted to work in an office that had a structural way of thinking and that knew the building process; I therefore chose to work for Rosenberg Architects. I have worked on a number of projects, among them several for the Stockholm International Fairs, from the Rica Talk Hotel and Hall AE, to the new main entrance.In the projects we undertook at the School of Architecture we had to identify and draw details that were central to our concepts. I have here identified some key details that we considered to be essential for the concept in a built project; the new main entrance of the Stockholm International Fairs completed in 2013. The entrance has complex logistics with multiple intersecting flows: exhibitors, employees, journalists, VIPs and others.