The purpose of this this thesis is to evaluate the books that the Library Project "Give me five" uses accoring to their own project objective. Starting in the discussion of censorship that took place in Swedish media, the goal of the project is to defend picture books that portray child's inner and outer worlds. Some of the books are selected by librarians and some preschool teachers themselves have chosen. I have a in a thematic analysis examined if the books' themes meet the requirements of the project goals and if there is any difference on the books that preschool teachers chosen and the ones that the librarians have selected. I have in a image analysis investigated whether they have used books that challenge children's imagery, and if the books portray children's outer world.

This report presents thesis of Liisa Kokkonen in collaboration with Muovikilpi Oy.The project?s goal is to find a new construction for an existing lamp made of acrylic. Form and design retains and the manufacturing occurs at Muovikilpi Oy. The project contains the new construction and manufacturing of the lamp and also a proposition for a set with floor and wall lamp.  The paper gives an outline of acrylic as material and how it reacts with light.

I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

The project has been provided by Zenit design group and the goal for this project was tomanufacture and perform tests of a prototype that supersaturates water in a continuous flow ofwater. The project has involved finding and sorting out relevant data in scientific papers, books,communication with foreign manufactures and other platforms for information.The project has resulted in manufacturing of a test rig and an oxygen infuser based onmembrane technology. The test rigs purpose was to perform tests on oxygen infusers fordifferent comparison test and performance benchmarks in a in a laboratory provided by Zenit.The project led to satisfying results using the oxygen infuser manufactured by the authors withcomparable levels of saturation to the reference infuser.The theory behind this project is based on medical research, belonging terms will be explainedbut the authors have chosen to delimit the project from the medical area. The reason for this islack of knowledge in this area and its irrelevance to the mechanical engineering education insuch..

The construction industry is always looking for ways to make the work more efficient aswell as minimize the waste of money in general. At the same time the industry is showing alow awareness of logistics which has to increase in order to improve the industry in thesekind of questions. Projects located in the inner city have high demands on the logistic andthe handling of material due to the so often limited space for storages of the material. Dueto this the purpose of this report is true a case, study and analyze what kind of factors thereis to take into consideration during the materials way from the supplier to the workstationin a project located in the inner city. The data for the report was collected with the help of acase study, and in three different ways.

Virtual teams are teams where team members don?t sit and work in the same place, they canwork in different countries, cities and buildings. It?s not the distance between team members that defines a virtual team, it's the extent to which the team is dependent on information technology to communicate and carry out a task. Virtual teams is becoming more common in organizations, to use virtual teams organizations can reduced time and travel costs and create a larger knowledgebase.A project manager for virtual teams faces many challenges, they have to build trust with and among team members they rarely or never meet, create a common understanding of project objectives and manage the challenges that culture and information technology creates.

The purpose of this degree project is to study if there is a intentional work with technology in the elementary school, preschool to fifth grade, in a municipality. The work will also study what conditions there are in the schools in order to work with technology. 95 questionnaires were distributed to the responsible teachers in all primary schools in the municipality, from preschool to fifth grade. The results of the survey show that more than half of the respondents do not consider themselves to work with technology in the school. The conditions, in order to work with the school subject technology in the municipality, are primarily external such as: material, facilities and the ability to divide students into smaller groups.

Preporsition for bachelor thesis project, working from the inside and out. Emphasising spatial quality and experience, More or less ignoring form and program. I?ve had issues with these aspects in earlier project, the form or the program takes alot of place in the project. I haven?t tried this approach before, it?s an attractive thought to allow the project take a form of it?s own, enclosing those spaces i create.The initial concept was to place the pools on the ground (not digging them into the ground) making them volumes that divide and define spaces.

The theme of this thesis is citizen participation in the planning- and design process. It turns to everyone that studies landscape architecture or work as landscape architects and I hope that it can function as a ground for discussions as well as a source for inspiration. Rågsved is a suburb south of Stockholm. Just outside the centre of this suburb, a small industrial area called Snösätra, is located. In a few years time the leaseholds for the small industries will expire and the key question is: What will happen then? This is my general concern and it was the main cause for me to start this particular work. How do you attend to a place that appears like blank sheet of paper? To an empty page that can be filled with an infinite number of different formulations.

This thesis has been done in order to ease the process of drawing schematics ofelectrical wiring. The need arose after demand from the government due to a seriesof incidents that took place during the revision of the nuclear power plant in year2009.The task of the project has been to create a computer program that can generate agraphical representation of the electrical components relations. The basis for theprogram has been an example of how the client wants the graphical representation tolook. During the course of the project weekly meetings have occured in which theclient has reviewed the work.The result of the project is a program written in Visual Basic Applications that can berun in Microsoft Excel. The program is capable of generating graphics for a majority ofthe cases.

The purpose of this paper is to examine how the target to convert the Swedish military aviation industry towards working within the civilian sector was planned and implemented parallel to the target of building a world-class military aircraft. A number of Government bills have been studied, bills directly connected to the JAS-project as well as bills dealing with civilian project ?s for the military aviation industry. The first group includes bills dealing with the JAS-project ?s role in the overarcing defence policy, as well as the Government ?s bill specifying the guidelines for the JAS-project.

Event is something that an increasing number of Swedish cities are investing in since it contributes to higher attractiveness of cities and generate economic revenues. New arenas are built around Sweden to meet the increasing demands to host such events. Event projects are carried out in Sweden and it is important that the planning phase is carried out thoroughly to get a successful project. This thesis aims to look more closely at selected organizations and how they plan their projects and whether it is possible to follow project plans in the event projects. Karlstad has many events that recur annually, including the Swedish Rally.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

This report was written as a result of a Bachelor Degree Project at the School of Technology and Society at University of Skövde spring 2007, together with Jede AB in Mariestad. The report covers the development of a door to a coffee vending machine that is under construction, and will in a chronological order describe the project from ideas to final product.The project started with a rather extensive feasibility study that thru market research and user tests sorted out the opinions of potential customers, concerning today?s available assortment. Technical areas concerning materials and manufacturing methods were also scrutinized for the consideration of the possibilities of a future production.The next step was to constructively generate ideas and thoughts that later on could grow to be potential solutions. After several weeks of hard work and pieces of good advice and recommendations from the assigner, four comprehensive concepts were built up.

SECO Tools manufactures tool inserts for all types of metal cutting machining. (Ti,W)C is a common raw material used in the production. At arrival, the material (Ti,W)C is always analyzed. Titanium has previously been analysed with x-ray fluorescence spectrometry, but as the calibration has previously been performed with two different types of titanium (rutile and metallic titanium), the results has differed. Because of that, this thesis project has been devoted to analyze titanium, to find the best titanium compound for producing standards.The work has been performed using literature studies and many experiments in the laboratories at SECO Tools inFagersta,Sweden.