Opera house, Stockholm, Galärvarvet, KTH, School project, Christian J.EKandidat projek: operaprogram med två operasalonger och en blackbox. .

Design for Six Sigma (DFSS) is a further development of the Six Sigma draft to carry through preventing quality measures in developing and designing of new products and processes. With increasing demands on enterprises development processes to be more safety and faster the need of DFSS arise as a product, process and service development concept in the organisations. Design for Six Sigma aims to improve and structure the development process of an organisation and consider the application of the innovation problem solving. The concept aims to leave the structure of the traditional Six Sigma concept and instead, from an innovative perspective, search for new solutions to existing problems. The concept constitute of a toolbox with a lot of quality tools that are divided into phases in a development model.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

Definitionen av ett projekt är att det måste gå att mäta om ett projekt nått sitt mål eller inte. Ett projekt skall också ha en klar och tydligt fastställd slutpunkt, där projektgruppen upplöses och projektet avslutas.De metoder som valts att användas för datainsamling är intervjuer med projektledarna och kunderna. Även litteraturstudier har använts för att kartlägga redan existerande kunskap inom området samt för att bygga upp en teoretisk referensram.I denna studie beskrivs arbetsgången hos två projekt. Vid jämförande och analys av arbetsgången vid de båda projekten visade det sig att det fanns både likheter och skillnader. I resultatet redovisas de båda projektens arbetsgång, samt vad projektledarna och kunderna har för åsikter om respektive projekts genomförande och slutresultat.

Definitionen av ett projekt är att det måste gå att mäta om ett projekt nått sitt mål eller inte. Ett projekt skall också ha en klar och tydligt fastställd slutpunkt, där projektgruppen upplöses och projektet avslutas.De metoder som valts att användas för datainsamling är intervjuer med projektledarna och kunderna. Även litteraturstudier har använts för att kartlägga redan existerande kunskap inom området samt för att bygga upp en teoretisk referensram.I denna studie beskrivs arbetsgången hos två projekt. Vid jämförande och analys av arbetsgången vid de båda projekten visade det sig att det fanns både likheter och skillnader. I resultatet redovisas de båda projektens arbetsgång, samt vad projektledarna och kunderna har för åsikter om respektive projekts genomförande och slutresultat.

Physical activity can reduce the risk of developing dementia, and studies show that people who already have some form of the disease can get a better memory function and find it easier to perform daily tasks if the activity is performed regularly. People who are diagnosed with dementia are generally not offered physical activity to a high extent, nor is there a wide range of equipment developed to suit the target group.The Bike Around project was launched during a workshop in Copenhagen and was organized by HCH and Techna Science with the aim to develop new training equipment for people with dementia. The workshop resulted in the development of a customized training bike where the user can get a biking experience from his wheelchair or favorite chair. By integrating the pedal movement with a prerecorded movie projected on a screen, the memory can be stimulated both visually and by the activity itself.Our assignment in the project consisted of three parts: design of the bike, movie playback and software programming. During the project a prototype has been created that meets the requirements of ergonomics and usability..

Water connects heaven and earth. Water is the most obvious element of nature. To move in water is for me more than cooling of on a hot summer?s day. It is about freedom and the feeling of being above the state of things.

The aim of this diploma work was to obtain a review of the appeal process in Sweden under the Planning and Building Act and the possibilities of appeal in the planning and building permit process. The work was intended to identify potential problems surrounding the appeal process and possible efficiency measures. The goal was to form a report that provides a satisfactory overview of the appeal process in theory and practical application as well as provide relevant concrete proposals on how the appeal process can be streamlined.Background and facts surrounding the work were taken from different types of literature and through several interviews with representatives in government, industry and politicians.The main problems related to the appeal process are in the long processing times and the high number of appeals. There is a great interest to streamline the appeals process and the government is going to launch studies in which possible future actions will be investigated.It is possible to appeal for up to two instances before you need a so called ?leave to appeal? in order for your complaint to be passed on to the next instance.

When producing an interview report the researcher is put to the test of describing the qualitative interview method in terms of assumed orderly steps and procedures taken during the interview process, while at the same time account for a very social dynamic process. In practice, even the most carefully prepared scenario for a qualitative interview study probably does not correspond to the expectations made. What happens between the plans and the actual interview itself? This issue is investigated by contrasting the actual engagement of the participants in an interview project to how these relationships are accounted for in Master thesis from the Swedish School of Library- and Information Science in Borås. Theory and methodology from Actor Network Theory (ANT) have been applied into the area of qualitative interviews.

The purpose of this Bachelor degree project is to design different types of services that can increase the amount of re-used timber within the building sector and by that means improve their environmental efforts. By examining how the sectors environmental work concerning recycling and re-using timber as a building material is getting on at present, conclusions have been drawn about what further could be done for improvement.The project has shown that there is a scarcity of information and statistics within the sector, but that there are efforts in progress to change this. Questionnaires have been sent to a number of companies working with demolition and utilizing re-usable materials in order to find out what kind of problems there are within the trade. Unfortunately the survey gave insufficient result due to the low reply frequency.It is obvious that active environmental work within the building sector is important and the knowledge acquired while working with the project has led to the design of three suggestions for services regarded as being of interest for improving the negative environmental impact caused by the sector:Suggestion 1 ? Sale of construction parts prior to the demolition of a buildingSuggestion 2 ? Re-utilization circulation when manufacturing buildingsSuggestion 3 ? Education in relation to the purchase of houses  The positive and negative qualities of the suggestions have been examined with SWOT-analysis and further adaptions and the results have been interpreted.

An emerging trend within the construction industry is the expectation of the customer to experience and sense the product, maybe even in a customized manner. The latter trend would extend the necessity of incorporating not only function and aesthetics, but also perception and sensation. To meet this trend while at the same time improve the productivity the use of information technology such as BIM and technical platforms has increased in construction projects. Nevertheless, in spite of large investments, the construction industry has not managed to increase the effectiveness and productivity as much as other industries. Evident is that successful use of information technology depend on the integration and collaboration of various experts in a continuous and dynamic process.

Ocean Modules Sweden AB is a small business active in the field of underwater technology. Thecompany was contacted by the Swedish Defense Materiel Administration (FMV) in order todevelop a new system that would conform to their specific requirements. Two students at theRoyal Institute of Technology (KTH) were consulted in conjunction of this project in order to aidthe development and conceptual design of the system.The primary users of the system are the divers of the Explosive Ordnance Disposal division (EOD)- a branch of the Swedish Armed Forces. The purpose of the product was to incorporate allnecessary functions required by the EOD divers into one single system. The main functions arecommunication between the surface operator and diver, video recording, still imaging, positioning,navigation and ocean floor mapping with sonar.

This study has been carried out as a part of the EC funded project, SMARTDOC IST-2000-28137, with the objective of developing application components that provide highly interactive visualization and collaboration functionalities. The low-level components from the graphics library AVS OpenViz 2.0 are used as the development basis. The application components can be inserted into electronic documents that allow embedded controls such as web documents or Microsoft Word or PowerPoint documents. Instead of displaying results as static images, a SMARTDOC component provides the ability to visualize data and interact with it inside the document. Although the principal goal of the SMARTDOC project is to create components in a number of different application domains this study concentrates on developing a medical imaging application component in collaboration with the project partners AETmed and professor Alan Jackson at the University of Manchester.

The aim of this study was to describe and analyze if and in that case how project Speaking English contributes to improved skills in English to pupils in reading and writing difficulties. The project started out in order to give pupils in reading and writing difficulties an alternative to the regular English teaching. The study was carried out in two nine-year compulsory schools. We have conducted interviews with both teachers and pupils to see what they think about the project. According to the teachers we interviewed Speaking English contribute to improved skills for the pupils and they also believe that their chances to pass the 9th grade will increase.

This is a project with the main purpose to create a visual identity and platform for the release of the new started record label Human vs Environment, by finding a form and logotype for the homepage and packaging of the first vinyl ep record by the artist Mr Kaizen. This has also been an exploratory work with the target to get a broader competence in the field of visual communication and increase my understanding of the designs communicative aspects of running a design project with an external partner from concept to finished product..