Efforts to achieve a moisture proof construction process have proved to be considerably complicated, despite the knowledge and awareness that now exists within the moisture field. Materials, documents, templates and checklists are designed to be accessed but are not used anyway. This may be because such effort has not been prioritized and properly requirements have not existed from the commissioner of a building.This report illustrates how the commissioner of a building project can achieve a moisture proof building process by increasing knowledge, moisture proof planning, and implementation of security moisture routines. Proposals are given on how the commissioner of a building project can work to consistently bring a moisture proof building process in all stages. The difficulty with regular moisture proof efforts, the authors believe is mainly due to the following points:      Many different design solutions.      Lack of experience feedback.      Lack of communication.      Financial incentives.      Attitudes.The interviews in the report have conducted with the help of a qualitative analysis, while the survey has been done using a quantitative analytical method.

The basis of the study lies with a newly patented gearbox by cardiologist and inventor Stig Lundbäck. Stig founded CorPower Ocean AB to further develop the gearbox to be used in a wave energy device. The purpose of this project is to develop a concept of a lifting system with CorPower Oceans gearbox that is more energy efficient than a hydraulic lifting system. The goal is to use technology from CorPower Oceans gearbox inversely to perform heavy lifting as an alternative to hydraulics. The project is limited to applying the gearbox and gear rack on a forklift with a lifting capacity of ten tons.The main tool in this project will be the product development process Systems Engineering where only the most relevant parts will be used to develop a concept.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

This thesis of 15 hp has been implemented at Halmstad University, in collaboration with Saab Dynamics in Linköping. Saab Dynamics is a company operating in the defence industry where competition is tough. This necessitates new ways to increase efficiency in the company, which is the basis for this thesis. Saab Dynamics wants to introduce simulation driven design. Since Saab Dynamics engineers have little experience of simulation, required a user methodology with clear guidelines.

Event is something that an increasing number of Swedish cities are investing in since it contributes to higher attractiveness of cities and generate economic revenues. New arenas are built around Sweden to meet the increasing demands to host such events. Event projects are carried out in Sweden and it is important that the planning phase is carried out thoroughly to get a successful project. This thesis aims to look more closely at selected organizations and how they plan their projects and whether it is possible to follow project plans in the event projects. Karlstad has many events that recur annually, including the Swedish Rally.

This master?s thesis was performed during the fall of 2006 at Cloetta Fazer AB in Ljungsbro. Cloetta Fazer is the market leader in Scandinavia of manufacturing confectionary and chocolates. The purpose of the project has been to identify causes that impact the quantity of waste in production as well as a cost/benefit analysis of the solutions that can reduce the problem of production waste.The work includes four production lines that are individually designed depending on what kind of product that are produced on the line. By using qualitative and quantitative methods such as focus groups, interviews and observations data has been collected.

This has been a thesis work for an bachelor degree at Umeå university. The work has been done at LKAB?s facilities in Kiruna and its main purpose has been to investigate and construct some conceptual designs for replacing a screen with magnetic separation in KA3 concentrator plant. First all information available about magnetic separation was gathered and studies of magnetic separation at the sorting plant and studies of the plant KA3 was conducted. Companies that manufacture magnetic separators were contacted.

This thesis describes the work process and the results for the development of a newkind of ergonomic cleaning mop, ranging from basic concept to a virtually productionready digital prototype. The project was made in cooperation with, Ömer Altun, whowas also the project supervisor, and whose plan it is to launch this new product onthe market in a foreseeable future. The mop is meant to be used by both professionalcleaning staff and ordinary home users. What makes this product unique is that it hasa movable center piece that simplifies the cleaning under low furniture.The work began with the establishment of a product requirements specification andlater a study of similar products and existing functional models was conducted. Afterthese surveys the work began with refining the existing concepts in order to makethem more complete.

This dissertation is carried out on behalf of Two i Sverige AB. Two is a consulting agency which primarily works with the development of homepages. The company has several of its complete applications written in ASP e.g. the development of homepages. At the agency they have seen benefit migrating these applications from ASP to the more flexible environment ASP.NET.

ABSTRACTThis paper aims to shed light to what extent a financier have learnt about sustainableorganizational change, through development projects taking part in the Swedish knowledgeFoundations program, ICT in Teacher?s training. Some questions asked were: Has theSwedish Knowledge Foundation learnt by researchers? and self evaluation?s ?stirring up? ofongoing projects? What type of learning process has been going on? Has new, mutual,knowledge been constructed or has already existing knowledge been transferred?The study consists of one participating observation and three interviews. They showhow the financed projects have been ?stirred up? so that a developmental learning process hasstarted within their organization.

The purpose of this paper has been to describe the project manager's experience of the customer relationship in customer order projects. A qualitative interview study has been conducted in which seven project managers were interviewed. A thematic analysis resulted in four overall themes. The results showed the importance of a clear, responsive and open communication as well as a large degree of customization to meet the customer the best way as possible. The experience was also characterized by a dynamic relationship and the importance of the customer's expectations.

This is a dissertation for a Bachelor Degree Project at the University of Skövde. The project is carried out in cooperation with the company Kinnarps AB.The objective of this project was to develop a new chair for café and lunch rooms, which should satisfy the markets expectations and demands and match Kinnarps AB?s assortment today. The project has contained everything from identification of user and customer needs and requirements to evaluation and building of a prototype.The result is a chair with a frame of tubular steel and there is nothing like it in Kinnarps AB?s assortment today.

Blast furnace is the heart of every steel plant. Steel production is based on the blast furnace process, as it is where the iron is extracted from the iron ore and turned into liquid iron, which will subsequently be used to make liquid steel. Therefore, without hot iron, steel can not be produced. Blast furnaces in this process are supplied among others with pulverized coal. Raw coal should be prepared for the blast furnaces in the form of fine coal powder.

The computer consultant company Create in Lund AB wishes to facilitate their invoice routines, as it at present is required that the administration finds and compares information from two different systems.The purpose of this thesis is to develop an invoice management system that simplifies the invoice management process for the administration at Create. During the development of the system, I have chosen to follow the software development process Unified Process and also tried to find design patterns that can be applied to the integration.The result of my project is a self-contained application developed using the Java programming language that communicates with the databases of the other two systems and presents relevant information to the user as a set of invoices. Of the 23 design patterns I studied, I used four of them in the invoice management system. However I couldn?t find any connection between any design pattern and the integration of systems.

There are lots of theories about participatory democracy, but rather few examples of how to create it in practice. In the 1930´s, scientists at the Chicago School, implemented some projects within the Chicago Area Project, with the aim to decrease the youth delinquency in the socio disadvantaged areas surrounding Chicago. In this thesis, I assess wether these projects, and in particular the one at the Russell Square Area, have some common features with the thoughts of two of the most famous participatory democrats, Carole Pateman and Benjamin Barber. My question is if the Chicago Area Project could be seen as an experiment in participatory democracy. I find that participatory democrats could benefit from the experiences of the Chicago Area Project.