The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

During the latter part of the 20th century the situation for people with intellectual disabilities in Sweden changed and developed. Clients have the right to participation and self-determination in society and in applied measures under the law of individual rights legislation; LSS. The purpose of this study is to describe and understand how team-leaders and managers in day-centres in a municipality works with participation and self-determination for clients, and what the professionals consider affects the client's possibility to self-determination and participation. The research questions intended to be answered are:? How does the team-leaders and managers work to enable self-determination and participation of the users in the public day-centres?? What does the team-leaders and managers describe and understand as enabling and limiting factors for the client?s possibility to self-determination and participation?The study is qualitative and interviews have been held with eight interviewees, which I contacted through snowball sampling.

The cost of transportation has strongly increased in the recent years, transportations which are a major part for the construction companies. Skanska Asphalt which is a part of Skanska Sverige AB has noticed that there are significant cost savings to be made with the purchasing of transports. The transports in this case is about asphalt, where the costs are about 10% of the outsourcing business turnover. The purpose of this thesis is to study the working practice that Skanska Asphalt are using today in controlling and time-writing, for the asphalt transportations. Resulting in recommendations on how to improve the working practice at Skanska Asphalt.This study was conducted with the help of a number of interviews with Skanska?s employees and with suppliers of transportation to describe the practices which are being used in during the asphalt transportation.

Intresset för ämnet uppstod efter en lång yrkesverksamhet i människobehandlande organisationer och den brist på samverkan och förståelse för andra yrkesområdens perspektiv som framkommit i den dagliga verksamheten. En önskan att se hur samverkansarbetet praktiseras, hos dem i vars uppgifter samarbete över institutionsgränserna ingår som en central del. Syftet med uppsatsen var att undersöka hur case managers organiserar sitt arbete utifrån frågetällningarna: vilka uppgifter har en case manager? Hur beskriver de sin respektive arbetsmodell och vilka för- och nackdelar ser de med sitt arbete? För att svara på frågorna genomfördes kvalitativa intervjuer med sju case managers i tre skilda arbetsmodeller: klinisk case management, personligt ombud och Assertive Community Treatment (ACT). Teoridelen består av en sammankoppling av de tre begreppen: biopsykosocialt perspektiv, samverkan och människobehandlande organisationer.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

The purpose of this degree project is to study a work evaluation project in a municipality, on the basis of key participants. The municipality is the employer, per-forming the workplace project and the chief objective is to reach gender equality between the employees. Equal pay for equal work. Through work evaluation is it pos-sible to find out which of a lot of different jobs, which have equal requirements. The jobs, which have equal requirements, should have equal pay.

The purpose of this project was to invite a changed perception of active sitting, to introduce a more active way of sitting in office environments and destigmatize an active sitting posture such as straddling by giving active sitting products conscious aesthetics based on environment and positive associations. The goal with this project was an active sitting product for office environments with aesthetics considered encouraging to movement in a relaxed way, regardless of age and gender, and connect to materials and aesthetics related to activity, experience and recreation. Horseback riding, retro style surfing and skateboarding was an entry of investigation. The project was based on existing active sitting products, their function and production techniques. It was not a part of the project to investigate new models of sitting.

The debate in the media on a new Swedish sex education movie sparked our interest in this study. The twenty-eight minutes long movie ?Sex on the map? is the first of it?s kind in twenty-five years. It is also part of a bigger sex educational project that contains, apart from the movie, a book about sex education, a documentary and a teachers guide. The project is a co-production between the Swedish Educational Broadcasting Company (UR) and the Swedish Association for Sexuality Education (RFSU).We were interested in how teachers received information about the project, and what their attitudes were towards it.

Background: The Swedish Police authorities have accomplished several changes the last years. We have studied one of these changes, the co-ordination of two supporting functions, economy and staffadministration at the Police authorities in Östergötland, Jönköping, Södermanland and SKL (Swedish crime technical laboratory). The initiative to this change was taken in 2002 and in 2003 a decision was made to create a joint servicecenter.Purpose: The purpose of this rapport is, in a collaborator perspective, to study the employees´ experiences of the change process.Method: The empirical material was collected throw interviews with the employees who have taken part in the change process. Even the leader of the project has been interviewed.Results: We have distinguished five central aspects in the change process. These are information/communication and understanding, the project leader, teamwork, timeaspect/reflexion and the leadership.

This thesis examines a project that has been conducted at a software development company. The aim is to investigate which problems firms of this kind faces performing projects. We choose a theoretical frame consisting of a modern view on how to manage projects. The view argues that the management of each project has to be adapted to the situation at hand. This theory is divided into two separate streams of reasoning; one emphasize learning, delegation of responsibility and flexibility, while the other argues for control, time planning and the importance of keeping to the plans.When we compare the theories to the case we draw three main conclusions: A thorough phase of investigation is required to produce the necessary planning documents.

In 2007 the project with the renewal of the Vasa Park in Stockholm won the Siena Prize. The architects responsible for the project described how they aimed for upgrading the park within its historical framework. Since the project was a renewal and not a restoration of the park, I thought it would be interesting to study how the architects proceeded with this work. The aim of this essay has therefore been to examine how the last renewal of the Vasa Park has chosen to approach the history of the place. To understand the historical development of the park and how the renewal project was carried out, I started with a literature survey consisting of books, the program of the renewal and articles about the project.

This project has been made in cooperation with Stora Enso Research Centre Falun (Research). Thebackground of the project is that Research has customers who demand a method to measure the quantityof varnish online in offset printing. The aim with the project is to investigate if any test method correlateswith the quantity of varnish and to improve the understanding of the variables in the varnishingunit. The goal with the project is to develop a functional method. Two printing trials have beenperformed.