This report is the result of a master thesis at Linköping University - Institute of Technology and Uppsala University at the request of the chassi workshop at Scania CV AB in Södertälje. Since the beginning of the 90's, Scania CV AB has had a close cooperation with Toyota from which, among other things, the Scania Production System (SPS) has evolved. SPS explains Scanias' values, principles and priorities. The Technician department (MST) at Scania Chassi in Södertälje believes that SPS can streamline the technicians work and help them become a more homogeneous group. The purpose of this master thesis is to initiate an implementation of SPS within MST through two pilot projects involving both the product and process technicians. The SPS principle Normal Situation - Standardised working method was required to be implemented within one work task each for the two groups of technicians with special attention on the three subprinciples Standardisation, Takt and Balanced flow. The master thesis fulfilled its purpose as the two pilot projects initiated the implementation of SPS within MST and the three sub-principles Standardisation, Takt and Balanced flow were implemented within the two chosen work tasks.

Abstract This study is an evaluation of a development project, seeking to work for entrepreneurial learning, starting from John Hattie's findings on the significant factors for visible learning. The study is based on action research a method together with a questionnaire, focused interviews and observation, by the issue of How do students perceive entrepreneurial learning? The results show that the methodology contributes to a more active learning and greater work satisfaction among students. The results also reinforce the thesis of the formative assessment and the importance of reflection for increased metacognition. The work identifies the project's educational shortcomings and strengths, and lays the foundation for further development towards full implementation of entrepreneurial learning in a secondary activity that works to prepare students with special needs for the labor market..

According to recent statistics the construction industry is responsible for the largest waste discharges of both dangerous and non-dangerous waste, when disregarding the "non-dangerous" amount of granite waste produced by the mining industry and the waste produced by the pulp and paper industry. Preventive work within waste management is an ongoing practice so to be able to reduce negative environmental effects. One of the most common actions for the companies to take is to separate the different kinds of waste from one another at the construction site. Although by working with the problem in earlier stages of the process a large amount of the waste could already have been reduced.Companies in the construction business that are actively working to decrease environmental impact in their operations often use an EMS (Environmental Management System). By using environmental management as method the company can manage their environmental work so that actions can be taken where they are needed the most.

The majority of the Swedish population were self-provided within agriculture a hundred years ago. Times do change and today the situation is the other way around - most of us live within city boundaries and only few work with farming and related agricultural businesses. One thing that has not changed though, is the need of supplies from Swedish agriculture.What do we think of those products? Are we even aware of the connection between us and agriculture? The Federation of Swedish Farmers, LRF (Lantbrukarnas riksförbund), started their project to strengthen the link between consumers and producers in 2008.This paper is part of the project and its aim is to investigate consumers' views and values upon the effects and products from Swedish agriculture.Opinions and values have been studied through interviews influenced by phenomenology. The results show that the informants in general had a positive approach and thinking concerning the products and effects from Swedish agriculture.

Milk allergens were digested by allowing them to flow through a chromatography column, where pepsin was conjugated to the stationary phase of the column. The allergen fragments were then characterized both biochemically, by using SDS-PAGE and gel permeation chromatography, and immunologically, by examining their reactivity to IgE and monoclonal antibodies..

The purpose of this thesis is to investigate whether the reading promotion project called ?A book?s all sides?, together with the activities of the book-event, can stimulate young people?s reading. The research questions are: How do the project leaders plan and organize activities for the book-event? How do the young people respond to the activities at the book-event? Do the young people get interested in the book which is presented at the book-event? Which connections between Vygotskij?s theory and the activities can be found in the book-event? The theoretical approach is based on Lev Vygotskij?s socio-cultural theory. To answer my research questions I have implemented four qualitative interviews and two interviews with the adult activity leaders and observed a book-event in the classroom.

This report describes a project, which was carried out as a final thesis covering 30 ECTS during the final semester of the Master of Science programme Industrial Design. The assignment was issued by Fagerhults Belysning AB in Habo. The assignment was to design a family of products in which LED was to be used as a source of light. The main focus in the initial part of the project was to find a way to design the inside of armature which was suitable for LED technology. An armature, already in the range of products at Fagerhult, with the desired qualities that was to be strived after was the Zintra. The lighting source of the Zintra is a compact fluorescent lamp.

At the Women?s House in Örebro, a children?s project has started where the work method ?Oasen? [Oasis] model has been developed by two children?s educationists. The aim of this study is, with the ?Oasen? model as a starting point, to deepen the knowledge of (1) how to meet children?s central needs while staying at a Women?s House and (2) what the ?Oasen? model may contribute to the children. The theoretical framework consists of a cognitive approach to the progress of children experiencing domestic violence and a presentation of conceptions concerning children?s needs.

Free2Move AB is developing products for the market within wireless communicationand identification, among those active RFID-tags. The company had an idea aboutproviding one of their active RFID tags with a GPS receiver and transmit positions viaan existing RFID protocol. Desire from the company was also the possibility to logpositions and measure temperature. The finished prototype should also be able to beactivated by movement. The company had proposal about components that were to beused in the project.

In previous studies there has been indications that multilingualism has a delaying effect of the onset of dementia and damage on cognitive abilities (Bialystok et al., 2007; De Bot & Makoni, 2005, s. 58). Cognitive abilities refers to memory, attention, language, abstract thinking and understandings among other things (Läkemedelsverket). Other studies have seen that individuals with Alzheimer's disease (Swedish abbreviation AS from here on) have difficulties with managing a conversation (Hyltenstam & Stroud 1989). This study aims to describe the topic treatment in bilingual individuals with AS and compare their different languages.

Quadrotor UAVs are self-stabilizing, autonomous flying machines that has recently become more popular than ever. Unmanned Aerial Vehicles have their roots in the military, where they were developed for use in reconnaissance and combat. During the last few years, advances in the fields of electronic sensors, electric motors and microcontrollers have enabled smaller designs and autonomic flight control even for private use. The quadrotor, which is the particular kind of UAV we are looking closer at in this paper, has 4 rotors in an X-like formation. This configuration has many advantages such as good lift capacity, non-complex mechanical structure and serviceability.In this project we aquired a current overview of the domain and determine whether it is possible to construct a quadrotor UAV designed for use in a WISENET sensor network on a low budget and short time schedule.Based on existing community project AeroQuad, a quadrotor is constructed with a budget of about 500 euro.

This project was intended to develop and improve my skills as an artist/designer. I have used inspirational sources and followedmy artist?s intuition to create something that is individual and a reflection of myself.My goal was to design 7-10 compositions and apply them to t-shirts and then create a photo arrangement with these t-shirts to make a strong artistic presentation.I chose to apply my images to t-shirts, because I feel that the tshirt is a perfect median to display pieces of art. My process has been very non-linear in nature. Trial and error,experimentation and my gut feeling have strongly influenced the progression of my design process and guided me to new ideas.I feel that with this project I have succeeded in fulfilling my goals to develop and improve my skills as an artist/designer..

Hammarby Sjöstad is a new district of southern Stockholm built with focus on reduced environmental impact by recirculation of materials and sustainability. The environmental goals aim to cut the water consumption by half and a separate storm water treatment. Thus, the wastewater will be more concentrated and will originate from the households only. The Sjöstad project includes the idea of a local treatment plant for the household wastewater. To evaluate this possibility, Sjöstadsverket, an experimental treatment plant was constructed.

The purpose of the study is to investigate the possible effects of an unstable ventilation system and its influence on energy use and thermal comfort. The report also explores how qualified personal working with HVAC view and handles system control.In order to meet the requirements in energy efficiency and a comfortable indoor climate control regulation is a prerequisite. With optimized increased complexity of the climate systems, it becomes more challenging to control the system and the risk of unstable control increases. No previous studies about what affect an unstable system can have on energy use and thermal comfort have been found.The report is based on several tests were the controlling variable has been increased until the system becomes unstable. Two different types of unstable systems have been investigated.

The project ?Investment proposal for grinding station for service work of screw feeders? has been performed during the spring semester 2014 for the course Bachelor?s thesis for degree of  Bachelor of science in machine engineering at Karlstad?s University. The project has been performed in cooperation with Fiber Workshop which is a service department in the company Valmet AB. Valmet AB is a company that develops and manufacture soft paper tissue machines. The screw feeder is a part that is used to feed, and squeeze out the water out of woodchips.