This thesis has been performed at Uddeholms AB with the purpose to investigate theparameters affecting the formation of inclusions during the manufacturing of a low carbonmanganese-steel.A follow-up, steel and slag sampling and evaluations in microscope have been done for a totalof five heats.The results for each heat have been evaluated in relation to the theory from the literaturesurvey and suggestions for changes in the process to reduce the amount of inclusions whichhave a negative effect on the steel quality have been given.The project extends over a large process where many parameters affect the formation ofinclusions. However, a tendency that a higher addition of alloys seems to increase the totalamount of inclusions before and after the vacuum degassing is seen.The majority of the studied inclusions seem to approach the composition of the top slag aftervacuum degassing. Ladle glaze may cause the inclusions which had a different compositioncompared to that of the slag.A high or low ladleage together with a high argon flow during vacuum degassing seems todissolve particles from the refractory which later on get trapped inside the inclusions.The floatation for two heats has been studied where a short floatation seems to give a higheramount of inclusions in casted material.In machined material so called stringers were found. The main composition of those stringerswas pure alumina. Inclusions with a composition of pure alumina were not found in the liquidsteel, thus the pure alumina inclusions must be formed during the casting.

I mitt examensarbete har jag arbetat fram en glaskollektion med tema mens. Målet med mitt arbete var dels att höja mensen ur tabut, dels att ge bruksglaset en ny scen. Genom att göra en menskoppsbehållare i transparent glas vill jag ifrågasätta varför vi gömmer och smusslar med våra mensskydd men också varför mensen idag framställs som oren, äcklig och skamlig. Jag vill uppmuntra till att bryta det mönstret, ge den som menstruerar en möjlighet att hylla mensen, sätta den i fokus, på piedestal. Mitt arbete resulterade i ett mensaltare, en tolkning av hur jag tror mensen hade framställts om vi levt i ett matriarkat.

In the spring of 2014 Sweco Systems AB were commissioned to design a ventilation system for a newly built preschool in Linköping. Terms from the client was that it cost efficiency would cope with the energy demands that are placed on the building. The unit chosen was a cross-flow heat exchanger, and this work is to compare it with two other heat exchangers to see if a more energy and cost efficient could have been chosen. The heat exchangers that was chosen for the comparison was a rotating- and a counterflow heat exchanger. Simulations have been made to the different heat exchangers by the manufacturers.

The goal of this project was to make the requirement process at the Swedish Coastguard more effective. The first step to achieve this was done by locating bottle necks in the process with value stream mapping method. The result of this study showed that the biggest restriction in the requirement process was while examining older requirement documents to understand what elements were suitable for the particular project. This was followed by a study of literature, interviews and theory of Lean Production with the ambition to investigate how the requirement process was handled on other companies and how to improve the process on the Swedish coast guard. This led to a number of potential enhancements of the process which later was evaluated.

The information flow is a very important process in an organization. It affects in a decisive manner the effectiveness of a task. It also has a major impact on the quality of the product or service for which the organization delivers to its customers. Lack of information may cause that important aspects are not given the required attention or even forgotten and can in turn lead to criticism from certification officials and lower customer satisfaction. The purpose of this study was to study how the information flow in Norrskog?s field organization is handled and how this affected the quality of the work performed and the feedback given to the contractors, The study is based on qualitative interviews with contractors, production inspectors and forest inspectors on all Norrskogs districts.

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

I have been inspired by the Do It Yourself movement. DIY builds on the creativity of the individual, one?s capacity for initiative and one?s desire to realise one?s ideas. I have been inspired by sheets of pattern paper used in the manufacture of clothing, and my line of furniture is based on two-dimensional patterns of furniture. The sections of the pieces of furniture are printed on and relate to a standard sheet of plywood.

This project includes a small study of Västerås city's housing needs, and a proposal on theuse of the property 1:207, Lantmännens silo in the Eastern Harbour, Västerås.The project intends to produce a basic study of the useful systems for this rebuilding projectwith regards to sustainable development and energy saving light buildings.The end result, which consists of a detailed visualization of the proposal, intends to becomean iconic natural focus for the Eastern port of Västerås and an example of the use andadaptation of existing structures.The property must also link the eastern parts of Västerås with the center through anextension of Mälarleden.The work has been performed through literature studies, site visits, contacts with the City ofVästerås and by calculations.The proposal consists of architectural proposals drawings and visualizations.Furthermore, a suggestion is given of how the property can be used and fitted into theoverall plan for urban density development currently underway in the city of Västerås.Computer programs used have been Microsoft Office Excel, AutoCAD and ArchiCAD..

This report was performed in order to evaluate a new technological measure and focuses generally on a heat pump system to a HWC-washing machine. The client is Asko Appliances AB, a company well known for its environmentally friendly products. The goal of this study was to improve the energy efficiency of a washing machine by combining a heat pump device to the heater of the wash water, in order to reduce the energy consumed for heating the water. Besides reducing the energy consumption in heating the water, the washing machine was required to meet low noise and short operating time specifications. For that purpose, nine trials in three test series have been carried out.

The goal with my project was to explore what it is that distinguishes Berlin as a city and then translate that into abstract patterns. The patterns are made for wallpaper and are presented in a book as a collection.After spending six months almost constantly abroad visiting many different citys I began to wonder what it is that makes a city unique. Sometimes it feels as though cities are reduced to the sum of their famous sights. But of course a city is more than that. It?s the people who live in it, the history, architecture and culture.

Interest in the implementation of AGV-systems (Automated Guided Vehicle) has in recent decades increased. The reason is that it allows companies to perform reliably and secure internal transport while reducing the need of personnel. It is one of todays most advanced and complex material handling system that can independently make their own decisions regarding flow paths and traffic control. An AGV-system consists of transport units carrying cargo from point A to point B, and communicates using a computer.The purpose of this study is to develop a model on how to proceed in order to design an AGV system in heavy industry. The model is tested by a case study of a company in the metal industry to determine if the model works and gives the correct result.

Detta arbete exponerar den problematik som existerar för spelutvecklare med avseende på att både erfarna och nya spelare ska tillgodoses i vidareutvecklingen av spelkoncept. I anknytning till detta diskuteras flow-teorin som kan sammanfattas som den optimala upplevelsen där balansen mellan utmaning och skicklighet är perfekt. Teorin ligger till grund för analysen och varför designfilosofin ?intern expansion? undersöks som en eventuell lösning på problemet. Det som undersöks är designfilosofins potential att generera en likvärdig upplevelse för både erfarna och nya spelare.

This is a project about learning from an experience, about trying to have fun and not getting overwhelmed and draining your work. The thing that wraps this whole experience together is the making of a book. The purpose of making the book has been to bring two interests together, illustration and graphic design.The content of the book for this graduation project is written by Fredrik Mårtensson. His poetry tells about the unnatural state of the modern society. I have interpreted the poetry in six abstract illustrations that I made digitally, with the intent to maintain the feeling of something organic.The process of making this book is a lot about learning what it actually takes to finish it, about trying to tell something and a lot about experience practical work..