At Degermyran landfill, situated in the municipal Skellefteå, a leachate treatment system was installed in 2005. One of the aims of this study was to investigate how well the treatment system works by using data from chemical measurements made on the leachate before and after treatment. Further this study had the purpose of investigating how the predicted climate changes of the 21st century will affect the amount of leachate generated at Degermyran by using a modified version of Thornthwaites water balance model. The treatment system has the ability of reducing manganese by 90 %, nitrogen by 73 % och TOC by 79 %. By the turn of this century the amount of precipitation that percolates the waste at Degermyran will be between 254 and 298 mm, depending on the amount of greenhouse gases that will be released in the future to come.

This is a non-traditional examination paper written after three years of studies at Malmö University and the Kaospilot Program. It is written in Swedish and in the spring of 2009. It describes a non-linear project based on a process-orientated theory called Theory-U by Otto C. Scharmer (2009). The project aims to investigate the changing conditions of Stage Theatre and deals with non-linearity as phenomena.

This thesis has evaluated environmental classifications of projects and the lessons learned to explore what the possible ramifications of implementing this in the construction and infrastructure are. Companies today are looking to develop methods to demonstrate their environmental commitments, but there is an uncertainty regarding the contribution of environmental classifications in this aspect.The literature review presents the theory of environmental classification, which provides a general knowledge of its function. The empirical data is based on an analysis of existing classification methods and qualitative interviews. The analysis shows specific environmental classification system for the area of construction and infrastructure. CEEQUAL is currently the only environmental classification applicable to Swedish projects and therefore serves as the basis for the continued analysis.

This paper describes a case study of the largest film production ever conducted in Scandinavia. The study aims at explaining the complex relationships in the network structure in which the project took place. Coordination of creative projects carried out in a network context, includes handling conflicting interest and contradictions. Creativity needs space and freedom while projects need structure and coordination, whereby controlling these projects becomes complex. Adding to the complexity, does the loose form of organization that the network structure represents, without any long term structure.

This report describes a thesis project on 15hp. The purpose of the thesis project is to build a laser projector that reacts on sound waves and thus get a laser beam to draw visualizations of sound waves on a wall. The idea was that the design would be independent and not have to be plugged into any audio equipment. This was achieved by absorbing sound waves into a microphone. Another factor was to get a ?do it yourself? -feeling of the design and therefore it was chosen to be constructed using for example, old hard-drives.The result was a relatively large and bulky designed laser projector that can draw sound waves on a wall..

Our education at Halmstad University was completed with a degree project. Our task was to improve an already existing pneumatic damper to Nederman in Helsingborg. Overall we have made necessary calculations to make the design of the existing damper smaller. When these calculations were done, we moved on with an analysis of the existing damper in order to figure out what improvements could be made on each part of the damper. The result of this project is a smaller and a more supple design of a pneumatic damper. To this we have also created complete drawings, calculated material expenses; we have also created an assembly of a pneumatic damper in Catia v5..

Projekt har blivit en allt vanligare arbetsform i dagens organisationer, men trots arbetsformens ökande popularitet inom flera olika sektorer så är det inte ovanligt att problem uppstår i samband med ett projekt. För att erhålla en ökad kontroll över ett projekt har därför sofistikerade projektstyrningsmetoder utvecklats, främst av militära myndigheter i USA. Syftet med denna uppsats var att beskriva hur en av de framtagna metoderna, EVM, kan vara ett verktyg för projektstyrning och hur metoden bör implementeras. Vi har också undersökt vilka problem som kan uppstå vid ett byte av projekstyrningsmetod. För att uppnå syftet med uppsatsen har vi genomfört en omfattande litteraturstudie samt en fallstudie på SSAB Tunnplåt i Luleå.

Mechanical scaling is one of the most complex operations of all in the mining process. The operators are using both hearing, sight and feel to read the rock and to know where to scale and where to leave. They say they go on gut feeling in great extent, something that comes with experience. The scaling machine is placed into the edge of unsecured and newly blasted rock to hammer off the blocks that has become loose after the blast, but not enough to fall down. It goes without sayingthat it is a risky job.

The dishwasher is a wide spread product that occurs in many households. It saves the user time,water and energy. When using a dishwasher instead of doing dishes by hand a lot of energy issaved.The importance of lowering the energy consumption does not only come from the consumerwinnings but also from an environmental point of view. Scientists are certain that the globalwarming comes from the emission of green house gasses that is created by human consumptionof oil, gas and coal.Dishwashers today are a lot more energy efficient than older dishwashers, but there are stillmargins to lower the energy consumption. The aim with this project is to investigate thedishwasher and it?s washing cycle, noting different phases and components that contribute towaste of energy.

The purpose of this paper is to standardize and simplify the design work on a few specific types of storage brackets for balconies. The company Balco AB had the wish to simplify the design work in the preparation of attachments to their balcony structures. This would be done by a calculation matrix that could be produced which then in turn could be used for each new project by the company. The design work behind the development of these fittings at each new project is costly both in terms of time devoted by each calculation but also the cost of the time. The purpose of this report is that in a systematic manner, a calculation matrix can be created that then the company instead may follow from each new project.In carrying out the project used HILTI calculation program, which was provided by the company HILTI.

The aim of this project is to study the work that has been done by the youth welfare to prevent accidents and to increase the preparedness in case of fire. Further the aim is to develop a basis to improve the interaction between the fire services and the youth welfare. The conclusions that were made during the project can be used to increase the safety of the environment that estates by the youth welfare..

During the spring semester of 2009 I have participated in what was to become the project The Allotment Plot; a collaboration between the Swedish University of Agriculture and the Wanås Foundation. As one of six students in landscape architecture I have experienced a group based learning process with the point of departure in the designing of an organic and experimental kitchen garden at Wanås, a sculpture park for contemporary art. The project came out as neither us nor any other of the people engaged could have guessed. What was meant to be a garden turned out to become an entire cultivation movement. As students, we have gained a lot of experience through praxis; experience that will be valuable for our future profession. The project has also opened up the possibility to question and reflect upon what our profession and education could or should be about. This thesis focuses on the role of communication and the production of communicative tools in design processes and landscape architectural practice. It discusses how communication may be used in an exploratory and ?un-securing? way, and how this may dislocate the professional role, especially in situations where the design action, as in the case of this study, demands a high degree of transdisciplinarity and collaboration. .

The emergency medical care in Sweden has been under persistent debate, due to factors such as long waiting hours, inefficient patient flow, and understaffed departments. In an effort to meet the critique and with a willingness to improve the problems, an increasing amount of emergency clinics are adopting theories and models within Lean. Positive outcomes are evident, there has been some criticism directed towards Lean. Among these is the argument that in order for Lean to be successful it needs to be used within standardized and foreseeable processes, and that it therefore only is applicable to those kind of processes found within industrial production. This prompted the question of whether Lean was a suitable strategy within emergency medical care, considering the large variation of patients and non-foreseeable processes that in fact share little resemblance to that of industrial production.

This major project in Building Engineering has its focus on inquiring into what methods has been used in the planning process of the residential buildingLjusbojen 1. This project has been conducted in cooperation with Kadesjös Ingenjörsbyrå AB, an engineering contractor firm which also acts as the property developer. Initially several different general methods for planning residential buildings have been presented. After the methods from the process of building Ljusbojen 1 has been analyzed compared to the general methods presented in part 1. This shows what the determining factors are during the planning process; factors such as cost, quality, time management, know-how and environmental issues.

I detta examensarbete behandlas investeringsalternativ för småskalig vattenkraft. Arbetet som riktar sig mot Skellefteå Kraft AB:s anläggningar, har således gåtts igenom, vartefter kandidater lämpliga för en reinvestering tagits fram med passande tekniker. Vidare nämns om dessa tekniker är lämpliga för minskning av förlusterna vid storskaliga utskov. De småskaliga anläggningarna är fördelade på två åar, Rickleån och Åman. I vardera finns två kraftverk som behandlas i detta arbete, Fredriksfors och Sågforsen i Rickleån, samt Åman övre och nedre i Åman.