Syftet med denna studie var att undersöka unga idrottares upplevelser i en topprestation.Studiens frågeställningar var:·        Vilka upplevelser har unga idrottare i en topprestation?·        Upplever unga idrottare flow i en topprestation?·        Vilka faktorer ligger bakom en topprestation hos unga idrottare? Utifrån syfte och frågeställningar valdes mätinstrumentet Flow State Scale-2 (FSS-2). FSS-2 består av ett påståendeformulär som mäter den totala upplevelsen av flow samt var och en av de nio dimensionerna av flow.Kontakt togs via telefon och mail med ansvariga tränare vid idrottsgymnasier för att finna unga idrottare med ett tydligt minne av en topprestation. Undersökningsgruppen blev 51 stycken unga idrottare, män och kvinnor i åldrarna16-20 år som utövat fotboll, ishockey eller orientering på elitnivå.Litteratursökning gjordes i bibliotekskatalogen tillhörande Umeå Universitet. Den funna relevanta litteraturen och artiklarna har legat till grund för denna studies bakgrundsdel. Påståendeformuläret FSS-2 visar att undersökningspersonerna, i sin topprestation, hade en stark upplevelse av inre tillfredsställelse, tydliga mål, koncentration på uppgiften, känsla av kontroll och balans mellan skicklighet och utmaning.

Swedish healthcare is in continuous need of cost savings and efficiency improvements in order to meet the increased demand for care. The theories of lean, developed from the industry, are applied more frequently on healthcare systems to increase effectiveness and reduce waiting times in patient processes. However, some processes seem to be more successful in their lean implementation than others. In this thesis, factors influencing flow efficiency in lean healthcare are examined. Through interviews with the top executive board at Capio St Göran's hospital, data is collected in order to analyze reasons for success.

Most people have been forced to throw away a pot-plant after its death. There are many reasons to the death of a plant, but mainly it?s because its owner forgets it, and therefore fails to water it. The purpose of this project is therefore to develop a product which can prevent this from happening, while the product has to have a low manufacturing cost to be able to compete whit other, similar, products on the market. During the project, a benchmarking has been done to give a clear picture of what the product has to compete with. The directives there are for CE-marking, and which of these who concerns the product has also been looked up.

In companies today, it is becoming more and more common for employees to work in a project based environment, as a result many companies have developed their own project models. Companies with a well developed product culture are striving to improve their existing models, and businesses relatively new in the marketplace are aiming to reach a high level of maturity as well as reach high levels of efficiency in the shortest time possible. As the number of mature and efficient companies with well developed project model increase, so does the level of competition in the market. Since a well developed project model often leads to a more efficient and accurate way of carrying out the project, which in turn leads to shorter delivery time towards the client. This is crucial as time is one of the most valuable parameters of competition in today?s business environment.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The globalization that has occurred during the last few years has made it more important for companies to have a well-functioning logistics system. Customers demand more options, which lead to an increased flow that creates greater demand regarding packaging and transports. Diverse logistics costs are nowadays a substantial cost for many companies. Therefore, more effort is aimed at optimizing transportation to lower these costs.The purpose of this project is to create a user-friendly calculation of logistics costs that illustrates how the costs vary, depending on how the flow is structured. This is done by examining which aspects that affect the total logistics costs and by mapping which aspects that should be included in a calculation of the logistics costs.Literature studies have been carried out parallel with empirical studies at Scania's production unit, MC, in Oskarshamn.

The main focus for this essay is to describe the relationship between human and nature through a material investigation that takes its shape through sculpture. With the help of a fairytale-like story the reader can share the creation of the sculpture and how my thoughts flow through the process that will result in an exam project. Rooted in earlier projects I discuss the crash between civilization and the wilderness as well as talking about the likeness of the creative process and child play. I also discuss the body's place in the forest and the loneliness that we humans created that has cut us off from the rest of the creatures and plants in the forest. My aim is that in the final piece I will create a fiction place where these can be joined together again.

The aim of this thesis is to map the current internal information flow at Volvo Uddevalla, to detect obstacles in the flow and to find out how these obstacles can be avoided. The aim is also to describe how a corporation, in this particular case Volvo Uddevalla, creates knowledge and use information. The study is performed in order to create a base for the coming implementation of a new information standard. The method used is conducting an information audit investigating the current management of documentation according to the changes that have to be made to carry out the claims from the standard. The investigation is made by way of interviews with 16 of the employees at Volvo Uddevalla.

BACKGROUND: Project based structures has become more and more common in the organizations of today. As the project based structures are given a more central role in the organizations the interdependencies between the projects are getting more attention. These structures need a new type of control to meet the unique challenges that arise. The researchthat has been done has been concentrated around the project form and the projects internal control, the area of multi-project management is therefore relatively unexplored. The few existing studies on the subject focus on projects in the construction industry why research inmore complex fields of business have been requested.PURPOSE: The purpose of this thesis is to explore and analyze how knowledge intense multi-project organizations manage their project activities, and to determine how different organizational characteristics affect the need for management control systems.METHODOLOGY: The empirical data has been collected through interviews with personnel in BT Products R&D, Gambro R&D and AstraZeneca Development.

This report will discuss principle, primary and finally manufacturing structure. We were asked to produce a 3D milling to processing the prototype material that is used on the University of Halmstad. From conceptual drawings to produce components for this project have we together with a number of company take developed the right components for this project. We have calculated and analyzed the construction to get the best result for it purpose. Unfortunately have the process to produce the 3D milling has been stopped because of deficient budget and time.

This thesis, in the field of healthcare logistics, has been carried out at Hjärt- och Medicincentrum (HMC) at the University Hospital in Linköping during the fall and spring of 2012/2013. The thesis is done by two students at Linköping University at master?s level within the framework of Industrial Engineering and Management.As Sweden's county councils should not make a profit or loss, it is important that the councils are aware of how much care processes cost. Kardiologiska kliniken at HMC in Östergötland?s county council is one of the clinics that are profitable.

The findings in this case study are mainly based on material collected during a field trip with a fellow student to Laos in February-March 2005, which was sponsored by Sida through a Minor Field Study scholarship. The original interest was to study a political aid project (Governance and Administrative Reform Project Luang Prabang, GPAR LP) in a country like Laos with very complex preconditions such as one-party polity. In Laos my interest in evaluation of political aid grew mainly because I found out that the two donors in the project, Sida and the UNDP, had reached different conclusions in their respective evaluations of the project.The main interest in this thesis has been to study how donors have evaluated a political aid project. The study shows that Sida and UNDP used, what in the literature usually is referred to as, Conventional evaluation as methodology when they conducted their evaluations of GPAR LP. The study also shows that the main reason for the different points of view that are expressed in the evaluations depend on a lack of dialogue and consensus, regarding for the project crucial concepts, rather than choice of evaluation methodology.

This Degree project summarizes how it is to work in the CAD program Revit Architecture. This was done because AQ Arkitekter in Eskilstuna is interested in how Revit works. Especially compared to AutoCad which is the software they are using today. Will their work become more efficient with the new software?The starting point was to find out how it is to work with Revit when you only used AutoCAD Architecture before.

Business unit Cylinder at ASSA AB in Eskilstuna are having problem with frictions in their production process. Changes are occurring and older products along with machineries are phased out and transferred to low-cost countries. This opens up possibilities to at a larger extend customize physical flows after production flows. The authors where given the task to analyze the production and find problem areas to improve and to give suggestion on how Business unit Cylinder can work to optimize their production flow.The aim of the thesis work is to come up with suggestions on how to reduce the lead time in production and how the tied up capital can be reduced. In more detail the task included to find problem areas that are counteracting an effective flow, give solutions on new flows for the production of the cylinder core, give suggestions for new stock points for the production and how the production shall be managed and controlled.During the last twelve months ASSA AB has sold over 700 different types of cylinder cores, and the product range is very wide.

Today there is no way of measuring or simulating turbulent flow in high Reynolds numberenvironments. The computational power required to simulate these conditions is not expectedto be available for several decades so instead the CICLoPE project aims at solving thisshortage by the construction of a long carbon fiber wind tunnel in which real measurementscan be made. To do accurate measurements it is of importance that the wind tunnel, 0.9 metersin diameter and 110 meters long, is as straight as possible.This master thesis treat the design and construction of a device which may be used to align thetunnel along a reference laser beam. A design is presented which allows the pipe to be alignedwithin about a quarter of a millimeter along its entire length. Contents span over severalscience fields such as physics, mechanics, control theory and electronics.The result is a theoretically correct design.