In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

When constructing a road the risk of emission of substances from the used materials to the surrounding environment has to be evaluated. The aim of this study is to present a proposal for how to evaluate the risk of contamination as a result of emission from the materials in a road construction. The study is based on literature studies, an inventory and a questionnaire that examines how experts in governmental agencies, industries and universities evaluate the risk of contamination. The inventory indicates that guidelines for evaluating the risk of emission from secondary materials in a road construction do not exist. The conclusions from the questionnaire are: that there is no common way to evaluate the risk of contamination as a result of emission from materials in the road construction, there is no uniform interpretation of the terms "minor" and "significant" risk of contamination and that the evaluation is subjective.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

The EU market is being deregulated, which sees Swedish farmers that have traditionally been governed by different support systems being forced to adapt to a free market system and having to deal with the concept of supply and demand. The farming sector has during the past several years experienced harder conditions and the deregulation of the market has directly affected farmers. The need for entrepreneurs and that way of thinking has been identified (McElwee, 2006). Swedish farmers are neither familiar with a free market or being required to think in an entrepreneurial manner, does this therefore implicate that Swedish farmers are not entrepreneurs?LRF is a national farmers? organization in Sweden and functions as a support for Swedish farmers.

This thesis describes the evaluation of a prototype (Illustrator) for future simulator training of Within Visual Range - combat in the Swedish Air Force. The main focus was to collect and transform user acceptance data (expert opinions) to useful guidelines for continued development. Thirteen active fighter pilots participated in the study. The aim was to use expert opinion to study a) the psychological user acceptance, and b) the technical user acceptance, of the Illustrator together with c) gathering opinions for future improvement. Three psychological aspects were rated before and after the sessions to measure psychological user acceptance.

In this report a system for Rapid Control Prototyping, RCP, is evaluated through animplementation of the motor control methods Field Oriented Control, FOC, and Space VectorPulse Width Modulation, SVPWM. The evaluation emphasizes on time-consumption andresource utilization on the used hardware and on usability for of software.A new mechatronic laboratory is under development at ABB Corporate Research in Västerås. Itwill be used for both mechanical and motion control design using existing and new hardware.The control structure in a traditional robot system will be interfaced to a rapid prototypingsystem which should allow easy changes to algorithms at different levels in the system.The system designated for this project comes from National Instruments and constitutesLabVIEW Real-time and FPGA module as the software tools. The hardware is a NI Single-Board RIO (Reconfigurable Input Output), sbRIO, development board including a Field-Programmable Gate Array, FPGA, from Xilinx and a microprocessor from FreescaleSemiconductor. Graphical programming is performed in the LabVIEW environment, andthrough Xilinx tools the LabVIEW FPGA code is compiled to VHDL code.A pre-study was carried out to clarify the concept of RCP and investigate different systems forRCP and their traits.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

Universal Design is a well established methodology with the fundamental purpose of designing products to be usable for as wide audience as possible, without the need of special adjustment to suit the individual. In this essay, Universal Design has had a clear influence in both the process and the result. The choice to use Universal Design as methodology in this usability evaluation, has essentiallv to do with the target audience.As a part of the design process of MyTobii C8 has Tobii Technology ask for a usability evaluation. MyTobii C8 is an 8" touch screen computer with a windows based operating system which will initiate the software MyTobii C-Series Control. MyTobii C-Series Control is the control panel for MyTobii C8, whose interfaces constitute the platform for various modificarion of the unit.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

In today?s technological society, there are increasingly less physical demands on the locomotor system. However, despite that notion strength and function in the hand?s complex biomechanical system are in fact both needed to cope with daily life. The grip function is a main function in the hand and is used in many examples of scientific research, for instance when assessing physical health and predicting the probabilities of premature mortality.

The purpose of this project was to invite a changed perception of active sitting, to introduce a more active way of sitting in office environments and destigmatize an active sitting posture such as straddling by giving active sitting products conscious aesthetics based on environment and positive associations. The goal with this project was an active sitting product for office environments with aesthetics considered encouraging to movement in a relaxed way, regardless of age and gender, and connect to materials and aesthetics related to activity, experience and recreation. Horseback riding, retro style surfing and skateboarding was an entry of investigation. The project was based on existing active sitting products, their function and production techniques. It was not a part of the project to investigate new models of sitting.

The debate in the media on a new Swedish sex education movie sparked our interest in this study. The twenty-eight minutes long movie ?Sex on the map? is the first of it?s kind in twenty-five years. It is also part of a bigger sex educational project that contains, apart from the movie, a book about sex education, a documentary and a teachers guide. The project is a co-production between the Swedish Educational Broadcasting Company (UR) and the Swedish Association for Sexuality Education (RFSU).We were interested in how teachers received information about the project, and what their attitudes were towards it.

Background: The Swedish Police authorities have accomplished several changes the last years. We have studied one of these changes, the co-ordination of two supporting functions, economy and staffadministration at the Police authorities in Östergötland, Jönköping, Södermanland and SKL (Swedish crime technical laboratory). The initiative to this change was taken in 2002 and in 2003 a decision was made to create a joint servicecenter.Purpose: The purpose of this rapport is, in a collaborator perspective, to study the employees´ experiences of the change process.Method: The empirical material was collected throw interviews with the employees who have taken part in the change process. Even the leader of the project has been interviewed.Results: We have distinguished five central aspects in the change process. These are information/communication and understanding, the project leader, teamwork, timeaspect/reflexion and the leadership.

This thesis examines a project that has been conducted at a software development company. The aim is to investigate which problems firms of this kind faces performing projects. We choose a theoretical frame consisting of a modern view on how to manage projects. The view argues that the management of each project has to be adapted to the situation at hand. This theory is divided into two separate streams of reasoning; one emphasize learning, delegation of responsibility and flexibility, while the other argues for control, time planning and the importance of keeping to the plans.When we compare the theories to the case we draw three main conclusions: A thorough phase of investigation is required to produce the necessary planning documents.